P07E4

Illuminated Powertrain Malfunction (Wrench) Indicator With DTC P07E4 Stored in the SOBDMC – 2021-2022 Ford Mustang Mach-E

by
2022 Ford Mustang Mach-E

NHTSA ID Number: 10228801 Manufacturer Communication Number: TSB 22-2490 Summary Some 2021-2022 Mustang Mach-E vehicles built on or before 14-Sep-2022 may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P07E4:00 stored in the secondary on-board diagnostic control module C (SOBDMC) and/or unable to engage park (P). This may be due to the software …

Read more

Various Symptoms Due To A Loss Of VREF Including Fuse 44 Open And/Or Illuminated MIL – 2020-2021 Ford Escape

by
2021 Ford Escape

NHTSA ID Number: 10202798 Manufacturer Communication Number: SSM 50245   Summary Some 2020-2021 Escape vehicles may exhibit various symptoms due to a loss of voltage reference (VREF) from the 14290 harness above the steering shaft u-joint. Possible symptoms may include an illuminated malfunction indicator lamp (MIL),runs rough, fuse 44 open and may or may not set DTCs …

Read more

Unable To Engage Park/Illuminated Powertrain Malfunction (Wrench) Lamp/Shift System Fault Warning Message And DTC P07E4 – 2020 Ford Escape & Lincoln Corsair

by
2020 Ford Escape

NHTSA ID Number: 10180341 Manufacturer Communication Number: TSB 20-2265 Summary Some 2020 Escape/Corsair vehicles equipped with an 8F24, 8F35 or 8F40 transmission may exhibit an unable to engage park condition with an illuminated powertrain malfunction (wrench) lamp and diagnostic trouble code (DTC) P07E4 stored in the powertrain control module (PCM) memory. There will also be a shift …

Read more

Intermittent No Crank, Remote Start Inoperative, Shift System Fault Message And/Or Illuminated Wrench Light With DTC P07E4, B135C And/Or U0103 – 2020-2021 Ford Explorer & Lincoln Aviator

by
2021 Ford Explorer

NHTSA ID Number: 10189577 Manufacturer Communication Number: SSM 49685 Summary Some 2020-2021 Aviator and Explorer vehicles built on and before 24-Feb-2021 may experience an intermittent no crank, inoperative remote start, and/or an illuminated wrench light with diagnostic trouble codes (DTCs) P07E4, B135C and/or U0103. This may be due to a loose ground G210 and/or G214. Check grounds …

Read more