6F35/6F15 – Updated Front Pump Inspection Procedure – 2013-2017 Ford & Lincoln

2013-2017 Multiple Vehicles – 6F35/6F15 – Updated Front Pump Inspection Procedure 2013-2017 vehicles equipped with the 6F35/6F15 automatic transmission have had updated procedures added to Workshop Manual (WSM), Section 307-01.   These instructions are designed to correctly diagnose failures within the (7A103) front pump. The new steps added will help with inspection of the pump … Read more

Distortion Within 10mm Of The Shaded Area At The Bottom Of The Windshield – 2015-2017 Ford Focus

2015-2017 Focus – May Exhibit Distortion Within 10mm Of The Shaded Area At The Bottom Of The Windshield Some 2015-2017 Focus vehicles may exhibit slight distortion in the windshield within 10mm of the shaded area at the bottom of the glass.   This is a normal manufacturing characteristic and should be considered normal, and no … Read more

Growling And/Or Scraping Noise After Brake Rotor Cover Removal – 2016-2018 Ford & Lincoln

Ford

SSM 46984 – 2016-2018 Various Vehicles – Growling And/Or Scraping Noise After Brake Rotor Cover Removal Some 2016-2018 Ford and Lincoln vehicles with factory installed brake rotor covers may exhibit a growling and/or scraping noise coming from the wheel area after the brake rotor covers were removed as part of the pre-delivery inspection.   This … Read more

Unable To Program And/Or No Electrical Power After Service Part Body Control Module (BCM) Installation – 2014-2019 Ford

2018 Ford Escape

NHTSA ID Number: 10156594 Manufacturer Communication Number: SSM 47875   Summary Some 2014-2019 Escape, 2014-2018 C-MAX, Focus, and Transit Connect vehicles not equipped with an auto start/stop system may exhibit an inability to program and/or no electrical power after installation of a service part body control module (BCM). Inspect the BCM for the presence of fuse F88. … Read more

Body Control Module (BCM) Software Programming Failures – 2013-2017 Ford Focus

2013-2017 Focus Vehicles – Body Control Module (BCM) Software Programming Failures. Contacts to the Technical Assistance Center and the Special Service Support Center indicate software installed using IDS level 105.03 resulted in some BCMs becoming blank/unresponsive.   The error has been corrected and technicians are to continue to reprogram BCM modules as directed by SSMs, … Read more