Diagnostic Trouble Codes (DTCs) P2201, P2452, P2459, P246C, P246C, P2463 – Manual Regeneration And DPF Parameter Reset – 2011-2018 Ford F-Super Duty

SSM 47402 – 2011-2018 F-Super Duty – 6.7L – Diagnostic Trouble Codes (DTCs) P2201, P2452, P2459, P246C, P246C, P2463 – Manual Regeneration And DPF Parameter Reset

When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed.

(more…)

Air Conditioning (A/C) Performance – Upfitter Responsibilities – 2015-2018 Ford Transit

SSM 47401 – 2015-2018 TransitAir Conditioning (A/C) Performance – Upfitter Responsibilities

Some 2015-2018 Transit vehicles equipped with the Auxiliary Heater / A/C Prep Package 62C are built specifically for A/C system modification.

(more…)

Rattle Noise From Engine Flex Plate – 2015-2018 Ford Edge

SSM 47398 – 2015-2018 Edge Vehicles – 2.0L EcoBoost With 6F35 Transmission – Rattle Noise From Engine Flex Plate

Some 2015-2018 Edge vehicles equipped with a 2.0L EcoBoost and 6F35 transmission may exhibit a rattle noise from the transmission bellhousing area while running.

(more…)

Engine Shuts Off Immediately After Remote Start With Or Without DTC P1594 Stored In Body Control Module (BCM) – 2016-2018 Ford Escape/Focus/Transit Connect

SSM 47397 – 2016-2018 Escape/Focus/Transit ConnectEngine Shuts Off Immediately After Remote Start With Or Without DTC P1594 Stored In Body Control Module (BCM)

Some 2016-2018 Escape/Focus/Transit Connect vehicles equipped with a remote start system may exhibit an immediate engine shut off with or without diagnostic trouble code (DTC) P1594 stored in the BCM after using the remote start function to start the engine.

(more…)

Air Conditioning (A/C) Defaults To Heat And Defrost During Remote Start – 2016-2018 Ford Explorer

SSM 47393 – 2016-2018 ExplorerAir Conditioning (A/C) Defaults To Heat And Defrost During Remote Start

Some 2016-2018 Explorer vehicles may automatically switch from A/C to heat and defrost after 1 minute during a remote start idle when the customer expects the A/C remain on. The system will return to normal operation after the ignition is turned to the run position.

(more…)