Body Control Module (BCM) Software Programming Failures – 2013-2017 Ford Focus

“This site contains affiliate links for which OEMDTC may be compensated”

2013-2017 Focus Vehicles – Body Control Module (BCM) Software Programming Failures.

Contacts to the Technical Assistance Center and the Special Service Support Center indicate software installed using IDS level 105.03 resulted in some BCMs becoming blank/unresponsive.

 

The error has been corrected and technicians are to continue to reprogram BCM modules as directed by SSMs, TSBs, and Field Service Actions.

For vehicles that already have a blank/unresponsive BCM, engineering is developing new software for a future IDS release.

Continue to monitor OASIS for updates.

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...