NHTSA ID Number: 10244797 Manufacturer Communication Number: TSB 23-2334 Summary This article supersedes TSB 21-2220 to update the model years affected and part list. Some 2018-2024 Mustang coupe vehicles may exhibit a sagging headliner or gap where the headliner meets the upper door weatherstrip. This may be due to an outward bent door frame moulding not allowing … Read more
NHTSA ID Number: 10207137 Manufacturer Communication Number: SSM 50442 Summary Some 2019-2022 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The … Read more
2015-2016 High Roof Transit Bus/Wagons Built Before 01/15/15 – Headliner Loose or Gap – TSB 15-0133 Instruction Sheet Update TSB 15-0133 repair kit instructions are in the process of being updated for vehicles built before 1/15/2015. The revised repair procedure will instruct technicians to remove all vent foam gaskets that are attached to the … Read more
NHTSA ID Number: 10156566 Manufacturer Communication Number: SSM 47848 Summary Some 2015-2019 Transit High Roof Bus/Passenger Wagon vehicles may have a headliner that does not stay seated at the C and/or C and half pillar hard trim. A permanent repair solution for the existing headliners has been developed and is expected to be available via TSB by … Read more
NHTSA ID Number: 10180681 Manufacturer Communication Number: TSB 20-2341 Summary Some 2015-2020 Transit high roof bus/passenger wagon vehicles may experience a loose or unseated headliner at the C and/or C 1/2 pillar(s) causing visible gaps. This may be due to a lack of retention capability of the headliner locator tabs to the pillar block pins. To correct … Read more