Rear Lamps – Clear Protective Film Service Kit Is Now Available – 2024 Ford Mustang

2024 Ford Mustang

NHTSA ID Number: 10250310 Manufacturer Communication Number: SSM 52248 Summary Some 2024 Mustang vehicles are equipped with a clear protective film layer affixed to the top surface of the rear lamps. This protective film layer helps reduce incremental signs of contact and should not be removed/discarded. In the event the clear protective film layer were to become … Read more

Rear Bumper Cover To Quarter Panel Poor Fitment And/Or Excessive Body Gap – 2024 Ford Mustang

2024 Ford Mustang

NHTSA ID Number: 10249752 Manufacturer Communication Number: TSB 23-2434 Summary This article supersedes TSB 23-2302 to update the Service Procedure and Parts List. Some 2024 Mustang vehicles built on or before 04-Dec-2023 may exhibit a condition where the rear bumper cover has poor fitment and/or excessive body gap where it meets the quarter panel. This may be … Read more

Instrument Panel (IP) Topper Rub/Scratch/Buzz Noise From Right Front Passenger Side – 2024 Ford Mustang

2024 Ford Mustang

NHTSA ID Number: 10244714 Manufacturer Communication Number: TSB 23-2311 Summary Some 2024 Mustang vehicles built on or before 29-June-2023 may exhibit a rub/scratch/buzz noise coming from the right front passenger side of the IP Topper. This may be due to contact between the IP topper contacting sheet metal by the defroster grille. To correct the condition, follow … Read more

2.3L EcoBoost – Illuminated Malfunction Indicator Lamp (MIL) With DTCs P0300 And/Or P0316 Stored In The PCM – 2024 Ford Mustang

2024 Ford Mustang

NHTSA ID Number: 10244715 Manufacturer Communication Number: TSB 23-2314 Summary Some 2024 Mustang vehicles equipped with a 2.3L EcoBoost engine may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0300 and/or P0316 stored in the powertrain control module (PCM). The vehicle may also run rough during a cold start. This may be due to the software … Read more