Driveline Vibration

AWD – Hybrid – Driveline Vibration At 25-50 MPH (40-80 Km/h) – 2020-2023 Ford Explorer & Lincoln Aviator

by
Ford & Lincoln Logo

NHTSA ID Number: 10242845 Manufacturer Communication Number: TSB 23-2072 Summary Some 2020-2023 Explorer/Aviator all-wheel drive (AWD) vehicles with a hybrid powertrain may experience a harshness and/or vibration felt through the seat, steering wheel and/or center console at 25-50 mph (40-80 km/h). This may be due to constant velocity (CV) joint instability at dynamic angles close to zero. … Read more

Driveline Vibration After Initial Driveaway Between 25-50 MPH (40-80 Km/h) – 2020-2023 Ford Explorer & Lincoln Aviator 4×4/AWD Vehicles – Hybrid

by
Ford & Lincoln Logo

NHTSA ID Number: 10233725 Manufacturer Communication Number: SSM 51439 Summary Some 2020-2023 Explorer/Aviator 4×4/AWD vehicles with hybrid powertrain may experience a harshness and/or vibration felt through the seat, steering wheel and/or center console after initial driveaway between 25-50 MPH (40-80 Km/h) that lessens after driving 5-10 minutes. This may be due to driveshaft center bearing bounce mode … Read more

6.7L – 6R140 Transmission – Hydraulic Brakes – Driveline Vibration At 1500-1700 RPM – 2017-2019 Ford F-650/F-750

by
2019 Ford F-650

NHTSA ID Number: 10170913 Manufacturer Communication Number: TSB 20-2012 Summary Some 2017-2019 F-650/F-750 vehicles equipped with a 6.7L engine, 6R140 transmission and hydraulic brakes may exhibit a driveline vibration typically during the 1500-1700 engine revolutions per minute (RPM) range. To correct the condition, follow the Service Procedure to reprogram the powertrain control module (PCM).     Model: … Read more

Driveline Vibration After Drive Pinion Flange Removal And Installation – 2015-2019 Ford Mustang

by
2019 Ford Mustang

NHTSA ID Number: 10160933 Manufacturer Communication Number: SSM 47991 Summary Some 2015-2019 Mustangs may exhibit a driveline vibration after removal and installation of the drive pinion flange. This may be due to improper removal and installation of the drive pinion flange. It is critical to reinstall the drive pinion flange in the same orientation on the drive … Read more

Driveline Vibration At Highway Speeds – 2015-2017 Ford Mustang

by

2015-2017 Mustang Driveline Vibration At Highway Speeds Some 2015-2017 Mustang vehicles may experience a driveline vibration directly related to a vehicle speed of 70-100Kmh (50-70Mph) and is perceived as a tremor in the floor pan, seat track, or steering wheel and may be heard as a rumble, hum, or boom.   Before replacement of any … Read more