| “This site contains affiliate links for which OEMDTC may be compensated” |
2011-2015 Various Vehicles – Heated Steering Wheel Module Inoperative After Module Programming
2014-2015 Fusion, 2015 F-150, MKZ, MKC, 2013-2015 Super Duty, Explorer, Taurus, MKS, MKT and 2011-2015 MKX vehicles equipped with a heated steering wheel can exhibit a condition where the heated steering wheel function becomes inoperative and the heated steering wheel module (HSWM) fails an on-demand self-test, but passes the network test.
This condition may occur after performing a module programming procedure on some other module.
To correct the concern, reprogram the HSWM to the latest calibration using release 96.02 and higher.
Calibration files may also be obtained at www.motorcraftservice.com
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
