| “This site contains affiliate links for which OEMDTC may be compensated” |
2014-2016 Fusion Titanium Hybrid And Titanium Energi – Reduced Subwoofer Volume in Electric Vehicle (EV) Mode
2014-2016 Fusion Titanium Hybrid and 2014-2016 Fusion Titanium Energi vehicles equipped with Sony Premium Audio can exhibit a concern of decreased subwoofer performance or decreased subwoofer volume when the gas engine turns off or when the vehicle is in EV mode.
To correct the concern update the Audio Digital Signal Processing module (DSP) to the latest calibration using IDS or Ford
J2534 version 96.02 or higher.
Calibration files may also be obtained at www.motorcraftservice.com
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
