| “This site contains affiliate links for which OEMDTC may be compensated” |
SYNC/MyFord And MyLincoln Touch – Navigation Displays Incorrect – Unable To Locate Vehicle – Built On Or Before 9/30/2014
2013-2015 vehicles equipped with SYNC and/or MyFord Touch, MyLincoln Touch and built on or before 9/30/2014 can exhibit a voice prompt indicating SYNC Services Traffic, Directions or Information (TDI) is unable to locate the vehicle.
MyFord Touch equipped vehicles with navigation may also exhibit the vehicle location displayed off road from the current vehicle position, the last known vehicle location being displayed instead of current location, a screen message indicating a Navigation Fault.
Reprogram the Global Positioning Satellite Module (GPSM)to the latest calibration using release 96.02 or higher.
Calibration files may also be obtained at www.motorcraftservice.com
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
