NHTSA ID Number: 10201606
Manufacturer Communication Number: SSM 50154
Some 2018-2020 Expedition/Navigator, 2015-2020 F150 and 2017-2020 F-Super Duty vehicles equipped with power running boards (PRB) may exhibit a condition where the PRBs are disabled, changing the feature menu setting from Auto to Off mode in the instrumental panel cluster (IPC), DTC U3003:16 stored in the running board control module (RBM) and with or without an illuminated charging system indicator lamp. This may be due to a low battery voltage event or a fully discharged battery. To correct this condition, inspect the charging system and correct the low battery voltage event. Refer to Workshop Manual (WSM), Section 501-08 > Diagnosis and Testing. Configure the PRB system mode from Off to Auto mode in the Advance Settings of the IPC. Refer to the Owner’s Manual > Power Running Boards.
28 Affected Products
1 Associated Document
- 【Automotive Car Battery Tester】 As one of the most cost-effective product of KONNWEI, KW208 can test all 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. Provide overall analysis of batteries’ health and help you know its status in advance before it dies. KW208 battery tester support cranking and charging system test also alternator and starter test.
- 【Display Overall Batteries Data】KW208 12V Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or charge the battery.
- 【 >99.5% Accuracy】Thanks to KW208’s powerful and smart chip, it provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers.
- 【Plug and Play】 KW208 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy!
- 【Starter& Alternator Tester】KW208 not only a great battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can switch up to 8 languages for different needs.
- 【Entry-Level Battery Tester】 Test and analyze your 12V lead-acid battery with ease. This TOPDON car battery tester tells SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and many other readable analysis results. Compatible with 100~2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
- 【Wide Application】Safe-to-use passive testing method allows this 12V battery load tester only to be powered up once it’s correctly connected. You don’t need to charge it before having accurate battery test results for a variety of vehicles: cars, motorcycles, trucks, RV, ATV, SUV, boats, yachts, lawnmowers, and even golf carts.
- 【3 Testing Functions】①Battery health test - tell if the battery is in good working condition; ②Cranking test - see if the electrical system has enough power to start the engine; ③Charging systems test - check if the generator/rectifier diode/charging current is normal. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
- 【Test with Little Fuss】This load battery tester is designed with 3-color LEDs on the unit so you can quickly identify battery health status. Thanks to its menu-driven operation it’s fairly straightforward to use. And the premium-quality copper clamps feature polarity reverse protection and spark proof, for a stable and safe connection in testing process.
- 【Solid Choice】Small and compact, TOPDON BT100 can easily be stored in a glove box or center console. Fast and accurate, this battery load tester will quickly help you determine if your car battery needs a jump start, or to be changed. A great option for automobile workshops, garages, and DIY users who need to check batteries on the regular.
- TRUSTED TESTING: Test load, battery condition, and starter motor draw; 50 Amp load test for 6V batteries and 100 Amp for 12V batteries; tests up to 1000 CCA
- COMPLETE DIAGNOSIS: Delivers a complete charging system diagnosis for batteries in cars, small trucks, RVs, motorcycles, ATVs, boats, and lawn tractors
- SIMPLE OPERATION: Top-mounted rocker switch for ease of use and highly visible meter readings
- HEAVY-DUTY CLAMPS: Super-grip, heavy-duty, color-coded battery clamps
- STEEL CASE: Durable steel case with baked enamel shell and rubber-insulated carrying handle; ventilated to stay cool
- 🔥【Easy Operation】- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.
- 🔥【Safety Ensured】- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC. 【If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"】
- 🔥【High Accuracy】- With a Four-character lighted digital display, the voltage testing accuracy will be close to 0.01volt. 【NOTE: Verify the counterfeit with only 3-character display. The accuracy is only 1/10 of ours.】
- 🔥【Rubber Paint Body to achieve the original quality】- Black Rubber Paint on the body surface to achieve the best feeling. As the inventor and the manufacturer of the tester, we are keen on the details to ensure the brand quality and the good custome buying experience.【NOTE: The counterfeit doesn't include the rubber paint on the body at all. 】
- 🔥【TWO-YEAR Warranty and Lifetime Service】- Direct source from MOTOPOWER factory. Just REGISTER your product on the manufacturer's website to activate your warranty. 30 days money back and 24/7 friendly customer service.
- [CONVENIENT]: Whether for the home, garage, or at the shop, the Neiko battery load tester is portable and DIY compatible for diagnosing and applying load to car, van, boat, truck, SUV, motorcycle, RV and other automotive 6 & 12 volt batteries.
- [QUALITY]: Tester body features protection-encased analog voltage meter display, anti-sparking internal switchgear and external handle grip at top for portable carrying.
- [DURABLE]: Copper clamp connectors feature red positive and black negative rubber grips to easily designate test clip placement on battery terminals.
- [PERFECT FOR MECHANICS]: Load on test switch (hold load for maximum of 10 seconds) draws battery current to simulate starter motor draw for accurately and easy to read determining battery condition.
- [ACCURACY]: Technical specifications: Fixed load current of 100 AMP, 100 AMP load test for 12V batteries up to 1000 Cold Crank Amps, 50 AMP load test for 6V batteries up to 1000 CCA. Voltage accuracy of ± 0.2V.
- [VERSATILITY] - The BAT 135 battery tester with integrated printer tests 6V and 12V batteries from 40 - 2,000 CCA and 12V and 24V charging systems
- [BATTERY TESTING] - AGM, Gel cell, flooded lead-acid, start/stop EFB and commercial SLI batteries using a micro-load test for proven, accurate results
- [CHARGING SYSTEMS TESTING] - Test 12V and 24V charging systems with a diode/ripple test
- [INTEGRATED PRINTER] - Integrated printer captures test results for customer records, presenting state of health and state of charge percentages
- [DETACHABLE TEST CLAMPS] - Test clamps are detachable, making service or replacement simple and easy
- Battery Health Test: The battery tester gives advice on where to replace the battery by intelligent analysis of the health status of the battery. It's tailored for 12V/24V batteries. Compatible with the regular flooded, AGM, EFB, and GEL battery for optimum performance
- Fast Accurate Detection: Thanks to the premium integrated chip, the test result of the battery health tester accuracy rate reaches 99.5%. At the same time, it adopts advanced conductivity test technology, which can be displayed on the LCD screen in just 3 seconds to see accurate battery health data
- Easy to Operate: Just connect the smart clip of the automotive digital battery tester to the car battery correctly, you can see the SOH, SOC, power, internal resistance, and the discharge capacity of the battery at the same time. Say goodbye to the expensive fee of checking batteries in the auto repair shop after now
- Over-voltage/Reverse Protection: By the low-frequency signal injection test, the vehicle battery tester protects the battery during the test. The premium-quality copper clamp features reverse polarity protection and spark resistance for a stable and secure connection during testing
- Essential Battery Assistant: As a car battery analyzer equipped with a dot matrix LCD display for us to diagnose battery health issues anywhere. Not only do we offer a quality battery tester but also 2 years warranty and 24 hours online service, please feel free to contact SinoTrack Team
- 【BATTERY CHECKER ANALYZER】 BT705 automobile battery tester designed for 12 V or 24 V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC Standards.
- 【CAR BATTERIES DOCTOR】 Adopt the advanced conductance testing technology, the premium quality copper clip and wire maintain a stable communication all throughout the testing process to provide you with reliable results! Accurately and quickly measure the actual cold cranking amps, capability of the vehicle starting battery and healthy state of the battery itself.
- 【CRANKING & CHARGING SYSTEM CHECK】 BT705 auto batteries alternator tester displays the decision on the starter system, cranking voltage and cranking time in milliseconds. Also, the battery diagnostic tool can check 12V or 24V charging system to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.
- 【WORTH TO OWN】 You need to know how much life your batteries have left. BT705 battery tester can accurate reading of battery health status in just 3 seconds in its large and easy to use backlit LCD display, help you diagnose and resolve battery health problems timely without disconnecting the battery or using a separate battery. It is widely for cars, suvs,mini-vans, trucks, boats, trackors other devices which equiped in 12v or 24v batteries.
- 【EXTRA-SAFE OPERATION】Different from other battery analyzers, our FOXWELL BT705 is equipped with 100% high-quality safety copper clip, which has reverse polarity protection and spark-proof function, which can achieve stable and safe connection during the test. Plus, the small and compact FOXWELL battery analyzer can be easily stored in our additional carrying case.
- LED display indicates condition, for 12V battery only.
- Alternator state check, battery state check, check before charge and overload display.
- Alternator check : accelerate your engine to 2000 rpm when the green light is lit ,charging circuit is ok.
- Battery check: indicate the percentage charging in the battery .
- Charger check: when green light is lit, charging is complete.
- Test 6 and 12V batteries
- 12V Charging system analyzer
- Complete test done in less than 10 Seconds
- Fully insulated , color-coded clamps
- Completely portable -external power source not required
Last update on 2022-05-20 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-05-20 / Affiliate links / Images from Amazon Product Advertising API