“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10177033
Manufacturer Communication Number: SSM 48916
Summary
Some 2020 Escape/Corsair/Explorer/Aviator vehicles may have diagnostic trouble code (DTC) U0100 stored in the audio front control module (ACM). This DTC will not cause observable conditions or warning indicators for the customer. If this DTC is detected during pre-delivery inspection (PDI) or while diagnosing unrelated conditions, it should be disregarded.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FORD | ESCAPE | 2020 |
FORD | EXPLORER | 2020 |
LINCOLN | AVIATOR | 2020 |
LINCOLN | CORSAIR | 2020 |
APPLICABLE VEHICLES
2020 CAR: TU U611A AVIATOR
2020 CAR: TF CX483N CORSAIR
2020 CAR: TC CX482N ESCAPE
2020 CAR: TZ U625A EXPLORER
1 Associated Document
Manufacturer Communications
SSM 48916 – 2020 Escape/Corsair/Explorer/Aviator – DTC U0100 Stored In The ACM
https://www.nhtsa.gov/recalls?nhtsaId=10177033
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- 2 channels x 750 watts @ 2 ohms
- 2 channels x 325 watts @ 4 ohms
- 1 channel x 1,500 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Variable electronic crossover: 12 dB per octave
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.09 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 15 Amp ATO Blade
- BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- slim to fit in any trunk
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- 500 Watts Max Power
- Automatic signal sensing and Turn-On
- Hi-Volt input level control
- Balanced isolator input circuit
- 1000 watts Max power
- Automatic signal Sensing and turn-on
- Variable high Pass filter adjustable bass Boost
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying
- 750 watt maximum power full-range amplifier Compactly built so this amplifier can fit perfectly into any trunk Blaupunkt 750 Watt Monoblock Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance of channel: 2/1 Channel
- Featuring 2-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150. Max. Output Power
- You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level,
- Textured aluminum heatsink
- High level inputs
- Selectable bass boost on all models
- Variable crossover network
Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.