NHTSA ID Number: 10140284
Manufacturer Communication Number: TSB18-2006
Some 2017 Mustangs equipped with DATC may exhibit poor A/C performance. This may be due to the way in which the front controls interface module (FCIM) software regulates the interior temperature. Follow the Service Procedure steps to correct the condition.
1 Affected Product
Issue: Some 2017 Mustangs equipped with DATC may exhibit poor A/C performance. This may be due to the way in which the front controls interface module (FCIM) software regulates the interior temperature.
Action: Follow the Service Procedure steps to correct the condition.
|In-Vehicle Temperature And Humidity Sensor||1||G3GZ-19E616-A|
|Small Interior Trim Tool|
- Perform the Refrigerant System Tests on the vehicle. Refer to Workshop Manual (WSM), Section 412-00. Did the vehicle pass these tests?
(1). Yes – proceed to step 2.
(2). No – this article does not apply. Refer to WSM, Section 412-00, for normal diagnostics.
- Reprogram the FCIM to the latest calibration using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 107.05 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
- Replace the in-vehicle temperature and humidity sensor. Refer to WSM, Section 412-00.
TECHNICAL SERVICE BULLETIN
Dual Automatic Temperature Control (DATC) – Poor Air Conditioning
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
|2017 Mustang: Test A/C System And Replace The Humidity Sensor Includes Time To Reprogram The FCIM (Do Not Use With Any Other Labor Operations)||182006A||0.6|
09 January 2018
|Diagnostic Software||Interface Device||Complete Vehicle Diagnostics||Module Programming|
|IDS/FDRS||VCM, VCM II, VCMM||X||X||X||X|
|FJDS/FDRS||Compatible J2534 Devices
(Including VCM II and VCMM)
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
|CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool|
|VSI J2534 ECU Reprogrammer|
|Drew Tech Mongoose Pro USB to CAN ISO9141 Interface|
Module Build Data (As-Built)
Use VIN to obtain As-Built data
- VXDIAG VCX NANO Box is PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic interfaces
- VXDIAG VCX Nano for GM/OPEL compatible with GDS and Tech2win software, support for GM/OPEL Diagnose and programming,for programming function, you would need buy software subscription online
- Fully compatible with SAE-J2534-1 & SAE-J2534-2; Quick access to vehicle data for maintenance or management reports; Support all current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
- About Software: Our hardware is compatible with original software and for SPS programming online you need purchase subscription online.
- Installation Tips: Tech2win software can only be installed on 32bit computer(win7 or win10 both ok) and please attention Tech2win software can not be installed on virtual machine, need install on physica system. For any technical problem, please feel free to contact us at any time, we have engineer can assist you online.
- TOP-LEVEL HEAVY TRUCK DIAGNOSIS: Want to diagnose different kinds of vehicles? Autel MaxiSysCV that comes with J2534 ECU Programming Device is the diagnostic tool you need! You can use comprehensive diagnostic functions including ECU Information, Trouble Codes, Live Data, Active Test, and Special services for Experts (Allison, Bendix, Caterpillar, Volvo, Freightliner, etc.), Buses (Volvo, Hino, Isuzu, Mercedes Benz, Volkswagen, etc.) and even Trucks (Volvo, Dodge, Ford, Foton, Mack, etc.).
- CODING FOR OPTIMIZING PERFORMANCE: With Autel MS908CV, Optimizing vehicle performance is not that hard! The 100% safe ECU Coding allows you to change options within the vehicle’s ECU to modify features for the tested vehicle. Note: Coding only changes preprogrammed options already existent in the software. High Beams and Fog Lights Together Double Blink Hazards Digital Accurate MPH Gauge Enhanced Bluetooth Enable, etc.
- SERVICE FUNCTIONS FOR FAST MAINTENANCE: You can complete a series of scheduled services and maintenance with only one MaxiSysCV. Free from the trouble of changing basic OBD2 scanners frequently to get related services. The most commonly performed service functions include Oil Reset, EPB, Brake Bleeding, DPF & SCR, IMMO & Keys, Injector, Throttle and more.
- USER-FRIENDLY FEATURES FOR HIGH EFFICIENCY: No fuss with complex operations! The user-friendly MaxiSysCV diagnostic tool reduces your fatigue. AutoVIN Scan allows you to check all the ECUs of the tested car in less than 1 seconds. Remote Desk Operation offers workshops a channel of controlling customers’ MaxiSys tablets for immediate technical support. Data/Shop Manager reduces the time spent on managing diagnostic files, workshop information, and more.
- POINTS FOR AFTER SERVICES: 1.About Quality: Autel MaxiSysCV is designed with advanced configuration (Android4.0 OS, Samsung Exynos 4-Core Processor, etc.) for smooth and reliable using. 2.About Warranty & Update: Within one year, Products with defectives in material or workmanship will be repaired or replaced free of charge and It’s free to update the software at regular intervals to increase MS908CV’s capabilities. 3. About Service: Autel is ready to answer any questions 7* 24 hours.
- ECU PROGRAMMING: This Diagnostic scanner comes with a SAE J2534-1 & -2 compliant PassThru reprogramming interface device which allows you to use the updated OEM software to replace the existing software/firmware in ECUs, programming new ECUs for Benz/BMW and fixing software-controlled drivability issues and emission issues. We welcome you to contact [email protected] or ask through Q/A for your specific need.
- SUPERIOR HARDWARE: The Maxicom MK908P is a upgraded version of the Maxisys Ms908P/Pro,it with Android4.4 based system amd super-fast hexa-core Processor, 2GM RAM, 64GB On-board Memory, 8.0 Megapixel rear cam, ultra-clear 10.1 inches LED screen etc.
- COMPREHENSIVE FUNCTIONS: Autel MaxiCOM MK908P performs the same function as Autel Maxisys Elite, Autel MS908S PRO, MS908E, and provide better price. this superior diagnostic device is awarded as the Best Vehicle Diagnostic Tool in Britain.12-month free updates，basic functions could still be used without updates.
- WIDE VEHICLE COVERAGE: Extensive OE-Level vehicle coverage for more than 80 US, Asian and European vehicle makes.It’s an ultimate car scanner for DIYers, experienced mechanics, even garage to finish professional-level vehicle repair and maintenance. To check compatibility, contact [email protected] or ask through Q/A, we will reply you in time.
- Multi-ADD ONS:This Autel Scanner could connect the Oscilloscope-MaxiScope MP408 and Digital Inspection Cameras for vehicle’s electronic test or get the sight in the tight spaces. We offer you a free ArtiBattery101, making you easily get the Battery Test Results. This car battery Tester is recommended by Soctty Kilmer and BestReviews. It can directly detect the battery data and give suggestions on whether to replace the battery. It also has cranking test and charging system test.
- 【Advanced IMMO & Key Programming】Autel IM608 is a perfect choice for auto technicians and locksmiths to encrypt keys, add keys, change keys, and generate keys. The Smart Mode and Expert Mode in IMMO app offer you guided and advanced Key Learning to choose. The Autel scanner can also read/write various key chips helping perform complete key programming quickly. Note: IM608 just can be used in the US. Don’t take it to other countries or change the IP.
- 【ECU Coding & Active Test】Active Test helps you accurately figure out whether a specific subsystem or component in vehicles goes well. This function may appear as Actuators, Actuator Test, or Function Tests, and the tests options vary by vehicle manufacturer and model. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
- 【Reliable Key & ECU Programming Tools】 Equipped with XP400 key programmer and MaxiFlash ECU reprogrammer, this Autel scanner performs IMMO Add Key, All Key Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
- 【Language & Wide Compatibility】When you get this Autel scanner, it only supports English. You can get the required language by providing the serial number for customer service via [email protected] Compatible with more than 80 makes and models from the US, Asian and European, the Autel IM608 can perform OE-Level all-system diagnostics for Chrysler, Dodge, Ford, GM, Jeep, etc.
- 【12-Month Free Update & Warranty】Autel IM608 comes with a 1-year free update online to improve the apps’ capabilities by adding critical patches, new models, etc. When the 1-year update expires, it will cost $1250 per year to continue updating. A 12-month warranty gives you a guarantee for any possible quality problems. For any question, feel free to ask the customer service.
- The diagnostic tool comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues.
- The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service.
- MK908P, as the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, features the 10.1” 1920*1200 screen upgraded from 9.7” 1024*768, and the battery capacity is 15000mAh increased by 4000 mA. Also, it has a better anti-impact protection design.
- The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems.
- The MaxiFix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software.
- ECU CODING & PROGRAMMING: Worked with J2534 Pass-thru device, MaxiSys Elite is capable of ECU programming for Benz and BMW.
- EXTENSIVE COVERAGE: Available for over 80 1996 US-based, 2000 European-based and newer OBD2 protocol vehicles with full OBD functions, 11 reset functions and full systems diagnoses
- EXCELLENT PERFORMANCE: Worked with MaxiScope basic kit MP408, MaxiSys Elite provides users with an insight to the inner workings of a vehicle's electronic circuits
- TECHNICAL SUPPORT: Remote Tech Support for real-time software update notifications via internet. Interactive Data Logging Sessions for direct contact with Autel. One-stop multitasking for ideal management of data
- THOUGHTFUL DESIGNS: MaxiSys Elite is with rubberized outer protection and a rugged internal housing. MP408 features color coded 4-channel control panel and one-click auto setup of voltage scale and time base
- Wireless connection - simple plug and play configuration Upgraded support includes 802 11bgn
- High Speed USB 2 0 Connection with improved protection and faster performance
- Improved stability during engine crank with extended temperature range
- Enclosure design protects from exposure to fluids and drops
- Additional vehicle communications protocols include upcoming Global B vehicles with faster data buses SAE J2534 and ISO-22900 compliant
- SUPPORTED MODELS - Compatible All 1998-2018 TOYOTA/LEXUS/SCION vehicles,For few functions on few old cars(such as before 2005),We recommend to use firmware V2.0.4 cable
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- WIFI Version VXDIAG VCX Nano compatible for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- Small size, easy to carry and convenient for us
- One year warranty
Last update on 2020-01-21 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-01-21 / Affiliate links / Images from Amazon Product Advertising API