| “This site contains affiliate links for which OEMDTC may be compensated” |
Manufacturer Communication Number: SSM 49495
Summary
Some 2005-2021 F-Super Duty 4×4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4×4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
66 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | F-250 SD | 2005-2021 |
| FORD | F-350 SD | 2005-2021 |
| FORD | F-450 SD | 2005-2020 |
| FORD | F-550 SD | 2005-2020 |
APPLICABLE VEHICLES
2005 – 2010 TRUCK: F7 F-SERIES OVER 8500 GVW
2011 – 2016 TRUCK: FA P473N SUPER DUTY
2017 – 2020 TRUCK: FE P558N SUPER DUTY
2021 TRUCK: FE P558N SUPER DUTY
NHTSA ID Number: 10095225
Manufacturer Communication Number: SSM 46345
Summary
SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.
1 Associated Document
Service Bulletin Document
SSM 46345
https://www.nhtsa.gov/recalls?nhtsaId=10095225
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10160885
Manufacturer Communication Number: SSM 47979
Summary
Some 2005-2019 F-Super Duty 4×4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4×4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
1 Associated Document
Manufacturer Communications
SSM 47979 – 2005-2019 F-Super Duty 4×4 – Front Hub Vacuum Seal Shield Kit Now Available – Extreme Dust, Mud Or Tar Sand Conditions
https://www.nhtsa.gov/recalls?nhtsaId=10160885
Loading...
NHTSA ID Number: 10170992
Manufacturer Communication Number: SSM 48494
Summary
Some 2005-2020 F-Super Duty 4×4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4×4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
1 Associated Document
Manufacturer Communications
SSM 48494 – 2005-2020 F-Super Duty 4×4 Front Hub Vacuum Seal Shield Kit Now Available Extreme Dust, Mud Or Tar Sand Conditions
https://www.nhtsa.gov/recalls?nhtsaId=10170992
Loading...
1 Associated Document
Manufacturer Communications
SSM 49495 – 2005-2021 F-Super Duty 4×4 – Front Hub Vacuum Seal Shield Kit Now Available – Extreme Dust, Mud Or Tar Sand Conditions
https://www.nhtsa.gov/recalls?nhtsaId=10186678
MC-10186678-0001.pdf 115.195KB
Loading...
- Manually locks vehicle into 4-wheel drive. Heavy duty stainless steel construction ensures lock will stay engaged.
- Springs, clips and wrench included for easy installation
- For 30 spline axels – check fitment guide. 2 hubs included (pair)
- If converting from automatic hubs, nut kit may be required
- Limited lifetime
- GREAT PRODUCT
- Fit type: Vehicle Specific
- Precision cast hub body
- Designed for OEM hub replacement
- 4WD AUTO LOCKING - Mud, rust or worn parts inside the hub can prevent the mechanism from sliding in and locking the hub. Anything that binds the internal mechanism can prevent it from sliding and releasing. The most noticeable symptoms may be an increase in fuel consumption, noise on the highway or increased front-tire wear.When locking hub can not work properly, It's time to replace a new 4x4 Locking Hub.
- COMPATIBLE WITH FOLLOWING VEHICLES - 4WD Hub Lock fit for 1999-2004 Ford F250 F350 Super Duty 4WD | 1999-2004 Ford F450 F550 Super Duty 4x4 | 2001-2002 Lincoln Navigator 4WD | 2000-2005 Ford Excursion 4WD | 2001-2002 Ford Expedition 4WD, please check the fitment in the product description below
- REPLACE PART NUMBERS - 1C3Z-3B396-CB 1C3Z3B396CB 600-203 600203. Package Includes 2 Pcs, fits either LH (Driver Side) & RH (Passenger Side) FRONT. fits 4WD (Four Wheel Drive) Models with Auto Locking Hubs only. Please check the part numbers whether it suits your vehicle before purchasing
- OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine Ford or Dorman 4WD Auto Locking Hub, but it works even better and lasts longer. Save yourself times and money by replacing 4WD Hub Lock for Ford F250 F350 F450 F550 Super Duty yourself.
- BUY WITH CONFIDENCE - All products have been 100% tested before delivery, If you have any problem with 4x4 Locking Hub for Ford F250 F350 F450 F550 Super Duty Ford Excursion Ford Expedition and Lincoln Navigitor, feel free to contact us, we will sort things out together.
- [OE Number] 1C3Z-3B396-DA, 1C3Z3B396DA, 600-204. Suit for front Rotor F81Z-1125-DA, Hub Bearing F81Z-1104-BH. Front manual axle locking hubs, used to locking front left and front right wheels.
- [Fitment of 4WD Manual Front Wheel Locking Hub] Only Fit 4WD/ 4X4. For Ford Excursion 2000-2005, For Ford F-250 Super Duty 1999-2004, For Ford F-350 Super Duty 1999-2004, For Ford F-450 Super Duty 1999-2004, For Ford F-550 Super Duty 1999-2004. Please check carefully before purchase.
- [Necessity of Front Manual Axle Locking Hubs] The locking hub may failure to lock the hub because of the sludge, rust and worn parts inside the vehicles locking hub. Thus causing problem like increased fuel consumption, noise on the highway, serious front wheel wear and tear. Ours locking hub adopting durable metal and reinforced cap with clearly marks for convenient use, anti corrosion, rust resistance, prolong the service life.
- [Features of Locking Hub Actuator] There have two situation of locking hubs on front wheels. When 4WD is dis-engaged, the locking hubs will disconnect the axle and allow it spin freely, rear wheels will achieve vehicle moving. When 4WD is engaged, the front wheels will get torque from the engine for the locking hubs will lock in front wheels to front axle. Replace the damaged lock hub in time to get better driving.
- [Package] Include 2x Manual wheel locking hubs. Please get profession video if install it in doubt.
- Compatible with or fits: (Note: Automatic Locking Hubs; 2013 - 2020 Ford F-250 Super Duty XL | 2013 - 2020 Ford F-250 Super Duty XLT) (2018 - 2020 Ford F-250 Super Duty Limited | 2013 - 2020 Ford F-250 Super Duty King Ranch | 2013 - 2020 Ford F-250 Super Duty Lariat | 2013 - 2020 Ford F-250 Super Duty Platinum)
- Locking Hub
- Review Description to Ensure Proper Fit
- 【OEM FIT】If your original hubs are worn out or broken, you may have potentially safety issues. These B3000 lock hub kit are designed to match the function and form of the original hubs, exactly OEM design to replace your defective hubs.
- 【PREMIUM QUALITY】You will get a fairly reliable and durable Mazda 428 lock hub, which is manufactured to the high quality steel material, has went through the rigorously to ensure structural strength and integrity.
- 【REPLACEMENT FOR】1983-1997 Ford Ranger, 1991-1994 Ford Explorer, 1991-1994 Mazda Navajo, 1994-1997 Mazda B2300, 1994-1996 Mazda B3000, 1994-1997 Mazda B4000.
- 【REPLACE OE#】Interchange Part#: 428. These Ford 428 hubs are manufactured to the OE specification to provide factory-fresh appearance and direct-fit that you can replace old or damaged hubs directly.
- 【12-MONTH WARRANTY】 If for any reason at all, you are not fully satisfied with the Ranger lockout hub, you can contact us through amazon message for carefree REPLACEMENT or REFUND.
- 【OEM FIT】A damaged hub lock will render your 4x4 useless and leave you stranded. This replacement 4x4 locking hub is manufactured to the OE specification to provide factory-fresh appearance, exactly OEM design to replace your defective lockout hub
- 【MAXIMUM DURABILITY】Brute strength matters, that is why the bodies of our lock out hub is crafted from reinforce material, feature anticorrosion and high impact resistant. Deliver better 4WD performance when locked and improved fuel economy in 2WD when unlocked
- 【COMPATIBLE WITH】2005-2023 Ford F-250 F-350 F-450 F-550 Super Duty. The 4wd hub lock assembly has went through vehicle try-on testing so that you will get a reliable front wheel locking hub to provide vehicle more powerful traction
- 【REPLACE PART#】BC3Z3B396B, BC3Z-3B396-B, 600-220. Since this axle hub assembly is a direct replacement for your factory hub, installation only takes a matter of minutes
- 【12-MONTH WARRANTY】If the 4-wheel drive manual lock hub link fails, cracks, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND
- Locking hubs ford f250 super duty located on the front wheel hubs the 4x4 hub actuator control power transferred from the axle assembly to the front wheels.
- Replaces OEM Part Number of locking hubs ford f250 super duty : BC3Z3B396B BC3Z-3B396-B 600-220
- 4WD Locking Hub Compatible with 2005-2018 Ford F250 F350 F450 F550 Super Duty.
- Ford Locking Hub Direct Replacement: This ford actuator is 100% compatible and a direct replacement for your existing part.
- Locking Hub Quality Warranty: 2 Year Warranty & Provide Lifetime technical support for WD auto locking hub actuator If the part ever fails.
- Direct Fit, OE Replacement Locking Hub
- Vehicle Specific: Check fitment information in the listing for compatibility
- OE Reference Number(s): BC3Z3B396A
- Aftermarket Reference Number(s): BC3Z3B396A
- Additional specifications below
Last update on 2024-03-29 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.