TSB 15-0158 | 6.7L DIESEL – MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED -DIAGNOSTIC TROUBLE CODES (DTCS) P259F, P0234 AND/OR P0236 – BUILT ON OR BEFORE 9/9/2015 |
FORD: | 2015-2016 F-Super Duty |
This article supersedes TSB 15-0077 to update the Action Statement and add a production fix date.
ISSUE:
Some 2015-2016 F-Super Duty Pickup vehicles equipped with 6.7L engine and built on or before 9/9/2015 may exhibit a MIL on with DTCs P259F, P0234 and/or P0236 stored in powertrain control module (PCM) memory.
ACTION:
Reprogram the PCM to the latest calibration using IDS or Ford J2534 release 97.04 or higher.
Make sure you are connected to the internet when entering module programming to obtain the latest updates.
Calibration files may also be obtained at www.motorcraftservice.com.
OPERATION | DESCRIPTION | TIME |
150158A | 2015-2016 F-Super Duty 6.7L: Retrieve DTCs And Reprogram The PCM (Do Not Use With Any Other Labor Operations) | 0.4 Hr. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
BASIC PART NO. | CONDITION CODE |
RECALEM | 04 |
https://static.nhtsa.gov/odi/tsbs/2015/SB-10074661-2280.pdf
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data