1.5L – Low Oil Pressure Warning With DTC P0524 – 2020-2021 Ford Escape & 2021 Bronco Sport

NHTSA ID Number: 10191097

Manufacturer Communication Number: SSM 49744

 

Summary

Some 2020-2021 Escape/2021 Bronco Sport vehicles equipped with a 1.5L engine may exhibit a low oil pressure warning with diagnostic trouble code (DTC) P0524. The Workshop Manual (WSM) Sections 303-14, 303-00, and 413-01 have been updated with new information to aid in diagnosis of the low oil pressure warning and DTC P0524.

 

 


2 Affected Products

Vehicles

MAKE MODEL YEAR
FORD BRONCO SPORT 2021
FORD ESCAPE 2021

 


Vehicles:

2021 Bronco Sport (CX430) (HD)
2020-2021 Escape (CX482) (TC)

 


1 Associated Document

Manufacturer Communications

SSM 49744: 2020-2021 Escape/2021 Bronco Sport – 1.5L – Low Oil Pressure Warning With DTC P0524

https://www.nhtsa.gov/recalls?nhtsaId=10191097

MC-10191097-0001.pdf 75.231KB

MC-10191097-0001

 


 

Bestseller No. 1
JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case
  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light.
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal.
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity; designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion; and the 90° coupling adapter prepared for limited access applications. Reinforced gauge hose uses ruber nylon resin material and has max working pressure 300 psi.
  • Wide Range of Application: If you are looking for a reliable auto fuel system oil pressure kit, this is exactly what you need. Oil pressure gauge tester kit comes with 1pc oil pressure gauge, 1pc 90° elbow fitting, 10pcs steel adapters and spare seal gaskets; Ideal for use on most types of domestic and imported cars, motorcycles, boats and other vehicles with gasoline engines and small diesel engines. Always notice the low pressure range of this oil pressure sensor test kit.
  • Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support.
Bestseller No. 2
Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.
  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light.
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately.
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum; And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability; Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment.
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
  • QUALITY ASSURANCE: 100% brand newengine oil pressure test tool kit, To guarantee 100% customers' satisfaction, we accept unconditional return service and 180 days warranty for all parts. Please contact with us if there's any quality or other problem.
SaleBestseller No. 3
YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-100psi
  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light.
  • There are three types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters which thread sizes are 1/8", 1/4", 3/8" can match with your engine and oil pressure does not exceed 100 PSI.
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0-100 PSI and 0-7 Bar. Compared to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. Return to zero automatically can get more accurate readings and is no need to calibrate.
  • Adapters in sizes of 1/8", 1/4", 3/8" are made of brass, featured with high hardness, rustless, durable and good air sealing. The 1/8" adapter is fixed on the hose, which can directly connect with applicable engine. The hose is made of rubber nylon resin and the length is 30" with working pressure is 300 PSI.
  • For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
Bestseller No. 4
JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV
  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done.
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on.
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover protected 3-1/2" large dial. 0-500psi and 0-35bar big scale range, is more suitable for testing big engine. No pressure holding function, return to zero automatically. The 40" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter. Max working pressure: 500psi
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR engine transmission oil pressure test gauge tool kit. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Bestseller No. 5
BTSHUB Engine Oil Pressure Tester Gauge and Transmission Fluid Diagnostic Test Tool Kit, 500 PSI / 35 Bar Gauge with Adapters Case
  • UNIVERSAL DESIGN: This oil pressure test kit contains a wide assortment of durable brass adapters designed to fit most import/domestic engines. Dual gauge is easy to read up to 500 PSI and 35 Bar. This is a great kit for DIY auto tools, to test engine oil pressure quickly and accurately.
  • DURABLE: High-pressure hose connection, max pressure 500psi. High-pressure hose. Rubber protect cover on Pressure Gauge, anti-fall, anti-shock, anti-scratch. High-quality brass connectors and Corrosion resistant rubber hose. It will last a long time
  • EASY TO USE: Threads into the same hole where you have your oil sending unit placed; Then please remove the oil sending unit or oil pressure switch and thread this in the hole, after that please start the engine and read your oil pressure
  • EASY TO STORAGE: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • PACKAGE INCLUDE: 6x Brass fittings, 4x adapters, 1x brass extension tube, 1x Pressure gauge with 42 inches long flex hose, 1x Instruction, and 1x carrying case
Bestseller No. 6
OTC Tools 5610 Trans-Eng Oil Press Tester
  • Large 3-1/2 inch gauges feature a chrome bezel and rugged protective outer boot
  • High pressure gauge reads 0-400 psi and 0-2800 kPa
  • Low pressure gauge reads 0-100 psi and 0-700 kPa
  • Both gauges include rear hook to allow gauge to be hung conveniently out of the way
  • Gauges and hose assembly incorporate quick couplers for easy disconnect
Bestseller No. 7
JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV
  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi.
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR engine oil pressure test gauge. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
SaleBestseller No. 8
YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi
  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light.
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy.
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on adapters.
  • For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
Bestseller No. 9
FAERSI Fuel Injection Pressure Test Kit - Universal Fuel Oil Engine Diagnostic Gauge Tester Set with Fittings, Instructions, Storage Case for Car Motorcycle Truck RV SUV & ATV, 0-100 PSI / 0-7 Bar
  • 【Special Design】: Complete Universal Fuel Injection Pressure Tester Kit is designed to easily detect the fuel pump pressure on injector systems, and check if fuel pump is defective or inconsistent in pressure flow.【Note】Our all products have a 18-Month WARRANTY, if you received wrong tester kit or it doesn't work, please feel free to contact us and we will give you a REPLACEMENT or REFUND.
  • 【Universally Compatible】: Suitable for any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection; Ideal for petrol engines of American Motors, Boschs AFC, MPC European & Japanese (except CIS), Chryslers Corp., Fords Motor Co., GMs (except TBI), Japanese fuel injection systems and so on.
  • 【Easy to use and Safety】: The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use 【NOTE】The Gauge kit don't include a push pressure release button.
  • 【Easy to storage】: The Fuel Injection Pressure Tester Set with a ABS plastic blow-molded case can keep the tools organized, safe storage and easy to transport.
  • 【Package Include】The Fuel Pressure Test Kit has all necessary fittings, hoses, clamps to work on most vehicles. Gauge calibrated from 0-100psi (0-7 bar); Includes Brass fitting 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Bestseller No. 10
Bonbo 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool & Oil Rail Adapters Leak Test Kit for Ford 6.0L Powerstroke Diesel Engine
  • Perfect Fitment – Work for Ford 6.0L Powerstroke Diesel high pressure oil system.
  • 6.0 IPR Valve Air Test Fitting Tool – Equipped with 1/4" pipe threads to accept standard air fittings. It takes place of the IPR valve and keep the system completely sealed, avoiding any possible leakage.
  • Oil Rail Adapters – Essential for connecting to the oil rail to test for leaks. It allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air.
  • Premium Material – Features top high quality solid steel or brass constructed with a slick finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time.
  • Satisfaction Guarantee – We are dedicated to offering the best quality product for our valued customers. If you're not satisfied with the kit, simply return it for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. Put us to the test! Click on the "Add to Cart" button NOW and get this amazing product!

Last update on 2022-10-06 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

Leave a Comment

Share to...