NHTSA ID Number: 10191065
Manufacturer Communication Number: SSM 49722
Summary
Some 2017-2021 F-Super Duty vehicles equipped with dual rear wheels (DRW) and 17 inch aluminum wheels may require valve stem replacement for the front wheels. The parts catalog has been updated to use service part F2GZ-1700-D for the front wheels.
20 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | F-250 SD | 2017-2021 |
| FORD | F-350 SD | 2017-2021 |
| FORD | F-450 SD | 2017-2021 |
| FORD | F-550 SD | 2017-2021 |
Vehicles:
2017-2021 F-Super Duty (P558) NA (FE)
1 Associated Document
Manufacturer Communications
SSM 49722: 2017-2021 F-Super Duty – DRW – 17 Inch Aluminum Front Wheel Valve Stem Replacement
https://www.nhtsa.gov/recalls?nhtsaId=10191065
MC-10191065-0001
Bestseller No. 1
150 Pieces Tire Valve Stems TR413 Tubeless Valve Stems Rubber Snap-in Valve Stems Black Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement (TR413)
- One Size Suits Most Cars: each valve stem for tubeless tires measures approx. 0.7 x 1.7 inches, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles
- Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear; In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time
- Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to guard your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you
- Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members; Please check the model and compatibility information carefully before ordering
- Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, convenient for your installation and disassembly, meanwhile, they can be operated by hand, do not need complex steps, time saving and effort saving; Please note that the tire technician should always replace the valve stem when changing a tire
Bestseller No. 2
Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412, 6pcs TR413, 6pcs TR414 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool
- All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412, 6pcs TR413, 6pcs TR414 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool.
- Valve Stem Puller - For installation or removal of snap in type tubeless tire valves
- Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good; Durable and practical
- 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves)
- Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool
SaleBestseller No. 3
Febrytold Tire Valve Stem Tool Remover & Installation, 6 Pcs TR412 Snap-in Valve Stems with Valve Stem Cores, 1 Pcs Single Head Tire Valve Core Remover Installer Tool (14 Pcs)
- 【Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve.
- 【Installation】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.
- 【Function】Works with any wheel that uses a standard 0.453" valve stem stem.
- 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks.
- 【Package】1 Pcs Valve Stem Puller Installer Tool; 6 Pcs TR412 Valve Stems with 6 Pcs Valve Stem Cores; 1 Pcs Single Head Valve Core Tool (14 Pcs)
Bestseller No. 4
100 Pieces Tire Valve Stems Rubber Black Rubber Snap-in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement (0.7 x 1.7, 0.7 x 1.4, 0.7 x 2 Inches)
- What you will get: you will receive a total of 100 pieces of tubeless tire valve stems (TR413: 50 pcs, TR412: 25 pcs, TR414: 25 pcs) ,sufficient quantity to meet your demands for daily use and replacement, you can store them for a long term use and please check the compatibility information carefully before placing an order
- Quality material: these black rubber snap-in valve stems are made of quality brass and ozone-resistant rubber, and have been tested by EPDM, ozone and leakage tests, and are equipped with high temperature brass valve cores, better performance, can serve you for a long time, economical and practical
- Easy to install: the standard length replacement tire valve stems are very easy to install and disassemble due to the snap-in design, you can easily install the valve stem with hands, time-saving and simple, providing you with much convenience when you are driving out; When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process
- Practical function: the tire valve stem can keep your car tire well inflated at a steady air pressure level, thus to reduce the tire wear and keep the vehicle running smoothly, also the quality part you choose to replace, you can buy it with confidence
- Suitable size: the practical black rubber snap-in valve stem size is about 0.7 x 1.7, 0.7 x 1.4, 0.7 x 2 inches, suitable for most cars, light trucks, small trailers, unicycles, lawn mowers and motorcycles, a good accessory for car owners or technicians
Bestseller No. 5
Vaincre 4 PCS TR416 Metal Valve Stems, Tire Valve Stems, High Pressure Valve Stems Outer Mount Fits 0.453" and 0.625" Rim Hole, 1 1/2" Long (Silver)
- TR416 Metal Valve Stems - Valve Stem is used to keep the air in a tire. Tire valve stems should be inspected periodically for cracking, leaking or deterioration, and they should be replaced as needed. Vaincre metal valve stems can ensure no air loss occurs while driving the vehicle.
- 2 Types of Diameter Rubber Grommet - Vaincre metal valve stem is suitable for tubeless tire which rim hole 0.453" or 0.625". Choose which one of the black rubber grommet you need. You only use ONE depending on the size of the valve stem hole in the wheel.
- Material - The main part of the valve stems are made of nickel plated brass and the rubber grommets are made of EPDM rubber, making them resistant to rust and corrosion. Vaincre metal valve stems are tough enough to withstand inclement weather or long road trips.
- Specifications - 4 pack TR416 metal valve stems, 1 1/2" inch Effective Length, maximum air pressure is 200 PSI. Complete size is 1.7" L x 0.75" W.
- Standard Auto Metal Valve Stems - The valve stems are easy to install. Replace your valve stem whenever you get new tires to help ensure long tire life, provding safety driving.
Bestseller No. 6
Dr.Roc Tire Valve Stem Puller Set –1 x Valve Stem Installer, 60 x Brass Ozone Resistant EPDM Snap-in Tire Valve Stem with Valve Core (15 x TR412,30 x TR413,15 x TR414), 1 x Valve Core Remover
- Valve Stem Puller-- For installation or removal of snap in type tubeless tire valves stems. Made of durable steel construction with soft rubber tube to protect wheels and rims from possible damage.
- Premium Rubber Snap-in Valve Stems -- For safe tire system and safe driving. Constructed of brass and ozone resistant EPDM rubber. 100 percent leakage tested Providing safe tire system and safe driving.
- Durable and Wide Tire Valve Core Remover - For quick removal or installation of tire valves cores. It is necessary tool to wring out the valve core when aerated or deflate the tire.
- Widely use to repair tubeless tires for dirt bikes, sport bikes, motorcycles, ATV,UTV, lawn mowers, cars and trucks.
- Package includes: 1* Valve Stem Installer, 15 * TR412 Valve Stems, 30 * TR413 Valve Stems, 15 * TR414 Valve Stems,1* Valve Core Remover.
Bestseller No. 7
Slime 2080-A Tubeless Tire Valves 1¼", TR 413 45, Schrader valve stem, pack of 2 valves
- Easily replace your worn and leaky TR413 tire valves with Slime Product
- Featuring a .453″ rim hole, these tubeless tire valves are 1.25" long and snap in easily to your TR413 tires.
- Has a Schrader valve stem and cap and packs contains two tire valves
- Quick and easy to use, just deflate tire and breakdown tire off rim and remove old valve stem
- Insert new stem from inside rim until it snaps into place and then reinstall tire and inflate to recommended psi
SaleBestseller No. 8
Aoerzn 8Pcs Premium TR413 Tubeless Tire Valve Stems, Black Rubber Snap-in Tire Valve Stem, Universal for Tubeless 0.453 inches 11.5mm Rim Holes
- THE AOERZN ADVANTAGE: Join our customer groups, and enjoy more excellent auto parts. Cooperate happily!
- WIDELY APPLICABLE: Perfect for the automotive world with 0.453 inch tubeless and 11.5mm rim holes. Instead of sele
- HIGH-QUALITY MATERIALS: These tire valve stem have been EPDM rubber tested, ozone tested and 100% leak tested, and are equipped with high temperature brass valve cores, good hand feeling, corrosion resistance, more durable and rustproof.
- CONVENIENT: These rubber snap-type tire valves are bolted for easy installation and maintain good pressure, durable and practical. Ideal for people who like comfortable driving. It will bring you peace while driving.
- YOU WILL GET: 8Pcs black TR413 rubber snap-in tire valve stems. I believe this product can fully meet your requirements. Welcome guide, high quality assurance and friendly customer service.
Bestseller No. 9
Veteran Tire and Rubber TR-416-S 1" Outer Mount Metal Valve Stem (4 Pack)
- TR-416-S 1" metal clamp in valve stem 4 pack.
- For use with .453" and .625" rim holes.
- High temperature valve core included.
- 1 inch effective length. 1-1/4 inch overall length.
- Nickel finish.
Bestseller No. 10
Steelman High-Pressure Valve Stems, Pull-Through Installation, Universal Fit, Pack of 25
- Quick installation - simple pull through installation on most wheels and rims
- Max cold pressure - maximum cold-tire inflation pressure is 80 PSI
- Max rim thickness - mountable on any rim up to 0.156-inches thick
- 1.27-inch Length - extra length allows for easier reach when inflating and servicing deep rims
- Universal fit - fits in any wheel or rim with a 0.453-inch valve hole
Last update on 2023-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
