| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10226753
Manufacturer Communication Number: SSM 51184
Summary
Some 2020-2022 Escape/Corsair vehicles built on or before 17-May-2022 and 2021-2022 Bronco Sport vehicles built on or before 25-Feb-2022 may exhibit a hiss or rattle noise while driving. This may be due to an internal issue with the manual park release cable. If the noise is eliminated when the cable is disconnected from the transmission, install a new manual park release cable assembly LX6Z-7D246-T. Refer to the Workshop Manual (WSM), Section 307-05 > Automatic Transmission External Controls > Removal and Installation.
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
FORD | BRONCO SPORT | 2021-2022 |
| FORD | ESCAPE | 2020-2022 |
| LINCOLN | CORSAIR | 2020-2022 |
1 Associated Document
Manufacturer Communications
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10211727
Manufacturer Communication Number: SSM 50743
Summary
Some 2021-2022 Bronco Sport vehicles built on or before 22-Feb-2022 may exhibit a hiss or rattle noise while driving. This may be due to an internal issue with the manual park release cable. If the noise is eliminated when the cable is disconnected from the transmission, install a new manual park release cable assembly. Refer to the Workshop Manual (WSM), Section 307-05 > Automatic Transmission External Controls > Removal and Installation.
1 Associated Document
Manufacturer Communications
SSM 50743 – 2021-2022 Bronco Sport – Hiss Or Rattle Noise While Driving – Manual Park Release Cable – Built On Or Before 22-Feb-2022
MC-10211727-0001.pdf 114.405KB
Loading...
NHTSA ID Number: 10203885
Manufacturer Communication Number: SSM 50274
Summary
Some 2021 Bronco Sport vehicles may exhibit a hiss or rattle noise while driving. This may be due to an internal issue with the manual park release cable. If the noise is eliminated when the cable is disconnected from the transmission, install a revised manual park release cable part number LX6Z-7D246-S following Workshop Manual (WSM), Section 307-05.
1 Associated Document
Manufacturer Communications
SSM 50274 – 2021 Bronco Sport – Hiss Or Rattle Noise While Driving – Manual Park Release Cable
MC-10203885-0001.pdf 114.725KB
Loading...
NHTSA ID Number: 10201596
Manufacturer Communication Number: SSM 50131
Summary
Some 2021 Bronco Sport vehicles may exhibit a hiss or rattle noise in the engine compartment while driving which may be originating from the manual park release cable. Disconnect the cable from the transmission and road-test to confirm the noise is eliminated. If the noise is still present, refer to Workshop Manual (WSM), Section 100-04 for diagnostic and repair information. If the cable is causing the noise, reconnect the cable and inform the customer that Ford is working on a solution which is expected to be available by mid-December 2021. Advise the customer that the vehicle is safe to drive and schedule a follow-up appointment for mid-December. Once the solution becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
1 Associated Document
Manufacturer Communications
SSM 50131 – 2021 Bronco Sport – Manual Park Release Cable Hiss Or Rattle Noise While Driving
Loading...
NHTSA ID Number: 10198650
Manufacturer Communication Number: SSM 49901
Summary
Some 2021 Bronco Sport vehicles may exhibit a hiss or rattle noise while driving. This may be due to an internal issue with the manual park release cable. Disconnect the cable from the transmission and road-test the vehicle. If the noise is eliminated, reconnect the cable and inform customers that Ford is working on a resolution scheduled for the end of August 2021. In the interim, let the customer know that the vehicle is safe to drive, and schedule a follow-up appointment with the customer for late August. Once the solution becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates. Manual park release cable replacement may not correct this concern.
1 Associated Document
Manufacturer Communications
SSM 49901 –
2021 Bronco Sport – Manual Park Release Cable Hiss Or Rattle Noise While Driving
Loading...
- Effortless Brake Pad Replacement: Simplify brake pad changing like never before with Orion Motor Tech's brake pad spreader tool! Quickly compress inner brake pads and reset pistons for easy pad replacement
- Smooth & Secure Operation: Experience smooth operation with the 0.4" thick solid steel rod featuring precision threading, while the ergonomic knob provides nonslip performance for seamless compression
- Even Compression: This swivel-designed brake caliper compression tool features a large contact surface, ensuring easy compression & damage-free performance for your brake maintenance tasks
- One for All Your Needs: Whether you're working on cars or light trucks, this brake piston compressor tool seamlessly fits a wide range of vehicles, ensuring broad compatibility for all your brake pad changing needs
- Built to Withstand Tough Use: Constructed from high quality structural steel, this brake caliper compression tool offers outstanding strength, and the electrophoretic coating provides long-lasting corrosion resistance
- EASY BRAKE MAINTENANCE: The Performance Tool W158C Brake Spring Compressor is perfect for removing and installing retaining springs on medium cars and truck drum brakes with diameters of 11/16-Inch to 7/8-Inch.
- BACKING PLATE SPRING REPLACEMENT: This tool is also ideal for removing and replacing backing plate springs, cups, and pins, making brake maintenance a breeze.
- PROFESSIONAL-STYLE HANDLE: The W158C features a heat-resistant handle that provides a comfortable grip and ensures safe and efficient use during long periods of work.
- IMPROVED TIP DESIGN: The improved tip design of this brake spring compressor securely grips parts and prevents slippage, making it easier to work on your brakes with precision.
- RELIABLE PERFORMANCE: Made with high-quality materials, the Performance Tool W158C Brake Spring Compressor offers dependable and long-lasting performance for all your brake maintenance needs.
- 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for most single and twin pistons floating calipers, twin and quad pistons fixed calipers or some sextuplet pistons fixed calipers (Just make sure the piston calipers space can accommodate the spreader)
- 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the centrally located ratchet screw creates uniform thrust to the push boards that can quickly push several pistons in the caliper at the same time. Effectively save energy and greatly improve efficiency.
- 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press both sides to assist in starting until push boards press the pistons), swing the handle until the push boards press the pistons to the suitable position, last, ajust the switch, retract the boards to remove the spreader.
- 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches; Telescopic range: fully retracted: 1.88”, fully expanded: 3.03”.
- Six - Months Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best solutions.
- COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake caliper tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, a carry case, and a pair of gloves
- EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits & rotate the pistons back into their calipers to clear your pads; embedded magnets in each thrust bolt assembly easily hold your drive keys & adapters in place during use
- UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models; see below for a full list of compatible models
- DURABLE BUILD: The sandblasted #45 carbon steel construction of our tool set ensures long lasting performance and corrosion resistance even after years of punishing use
- CUSTOM CASE INCLUDED: The heavy-duty blow molded case ensures your tools are securely housed, making it simple to carry them wherever you need to go while keeping everything in place
- Ideal for 4 wheel drive cars/trucks
- Includes left and right handed thrust bolt assemblies
- The kit includes 18 adapters which fit a variety of modern car brands
- 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
- Storage case and a pair of gloves included.
- Material: our brake caliper hangers are made of 1/4 inch durable steel, with sturdy construction, not easy to break.
- Package : 2pcs brake caliper hangers with rubber tips,which are suitable for a variety of automotive work, such as tasks related to brakes, wheel bearings, axle shafts and suspension servicing .
- Rubber tips: each brake caliper hanger features a rubber coated tip at each end of the hook, which can effectively prevent the scratching of your painted suspension components, hold your brake caliper safely, and reducing the possible damage to brake hoses .
- Use Of dedicated tool makes repair jobs quicker for added productivity .
- Easy to find: each brake caliper hanger is powder coated in yellow, bright color is easy for you to find when you need them, and never worry about misplacing these brake caliper hooks or forgetting them on a car again.
- 【Wide Application】This disc brake caliper wind back tool kit includes 24 adapters for most vehicles. For Alfa Romeo,for Audi,for BMW,for Citroen, for Ford, for Honda, for Jaguar, for Mazda, for Mitsubishi, for Nissan, for Opel, for Renault, for Saab, for Toyota, and more
- 【Package Included】 24*adapters, 4*retaining plates, 2*thrust bolt assemblies, 2*hex wrenches, 2*hex rods, 1*oil can. All items are well organized in a plastic case.
- 【High Quality】 This hand brake calliper tool is made of carbon steel construction with a rust-proof, blasted finish, making it strong and durable. The T-handle's precision threading provides smooth and effortless piston retraction in both directions, guaranteeing comfortable and convenient use
- 【Easy to Operate】This disc brake caliper tool is used for brake pad and shoe replacement, as well as rotating pistons back into the caliper on your car, truck, or 4-wheel drive disc brake
- 【24/7 Customer Support】maXpeedingrods all items are all tested for reliability, durability and performance. Any question, please feel free to contact us, we will do our best to help you
- 【High Quality】: Made of 45# steel, long service life, high hardness, not easy to deformation. It has been wrought by fine work and is more resistant to impact and wear than ordinary steel. If you want to change your brake pads, this is a must.
- 【Easy to Operate】: The retracting tool for the rear brake pads of the car is easy to use, and the retracting piston is available on the left and right screw piston calipers, so you can operate it easily. It made things quick, easy and painless.
- 【Size】: Screw size is 5.4*3.7in, top piece size is 3.5*1.8in, please confirm the size before purchase. If you just started using it, it's a bit time consuming, please don't rush it.
- 【Practical and Efficient】: Brake caliper piston winding tool, used to install brake pads of domestic and imported cars and trucks with return air piston calipers.
- 【Applicable】: This handle set brake caliper winding tool is ideal for removing or installing press fittings such as ball joints, universal joints, automotive brake fixing pins, etc.
- The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing.
- Designed to check both straight on or at a 90° angle to the rotor with offset tips so the gauges can be used without removing the wheel or caliper assembly on many applications.
- Brake lining gauges identify thickness levels for brake lining inspection.
- Made from durable, flexible acetal.
- The gauges are color coded to match SAE or Metric recommendations for brake pad replacement.
- 【Wide application】TUTOOLS brake caliper piston Saves time and much easier to use than most other ratchet caliper tool.Professional brake caliper piston press tool, ideal for most vehicles and trucks on the road.This tool is for brake tools and brake cylinder adjustment group,and you will need more than 1.5" of clearance between the caliper edge and the piston in order to fit this thing in there.In use, you can you can use a trustworthy C-clamp as an auxiliary tool.
- 【Premium material】TUTOOLS car ratchet brake piston is equip with extra 2pcs steel plates (4-5/8L x 2-3/8H)perfect fit for Single, Twin or Quad Piston Calipers.
- 【Usage Methods】Make the spreading plates both sides Centralized Alignment the pistons. Due to ratcheting structure, two spreading plates need pressure to start the ratchet. Let both sides of the spreading plates be forced at the same time, please squeeze them for the first few swings until the suitable position to` insert into the caliper. Finally adjust the switch, go ahead to swing. Please make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
- 【Warm Tips】Without pressure pushing inward on the spreaders, you will not be able to ratchet the tool in or out. If the tool is set smaller than the space between the piston and caliper edge, you will need to push against the spreader until it touches the metal of the caliper.
- 【Excellent Service】We TUTOOLS Team provide 24 months customer service and 30 days money back for all TUTOOLS products ,if you do not satisfied with our item, we can provide you best solutions to satisfy you.
Last update on 2025-07-07 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.