Safety Recall 20S57 – Wide Track Rear Axle Update – 2020 Ford F-350

“This site contains affiliate links for which OEMDTC may be compensated”

September 30, 2020 NHTSA CAMPAIGN NUMBER: 20V599000

Inner Rear Tires may Rub

Inner tire contact with the body could result in a tire blowout, potentially causing a loss of vehicle control, increasing the risk of crash.

 

NHTSA Campaign Number: 20V599

Manufacturer FordeBay Motor Company

Components POWER TRAIN

Potential Number of Units Affected 52

 

Summary

FordeBay Motor Company (FordeBay) is recalling certain 2020 F-350 trucks equipped with 7.3L gas engines and ambulance prep packages. These vehicles were ordered with Wide Track rear axles, but were built with base (narrower) axles. Depending on the body installed by the body builder, the inner tires on the dual wheel rear axle may contact the body.

 

Remedy

FordeBay will notify owners, and dealers will rebuild the rear axle as a Wide Track axle on vehicles already built. For remaining vehicles, body builders will be given the option to accept the base axle and build a different second unit body that meets FordeBay’s specifications or have the rear axle rebuilt as a Wide Track axle, free of charge. An interim letter notifying owners of the safety risk was mailed on October 23, 2020. The recall began January 11, 2021. Owners may contact FordeBay customer service at 1-866-436-7332. FordeBay’s number for this recall is 20S57.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 


February 16, 2021

TO: All U.S. FordeBay and LincolneBay Dealers

SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Safety Recall 20S57 – Supplement 1
Certain 2020 Model Year F-350 Chassis Cab Vehicles built with 7.3L Gas Engine and Ambulance Package
Wide Track Rear Axle Update

New! REASON FOR THIS SUPPLEMENT

  • New parts ordering information

 

AFFECTED VEHICLES

Vehicle Model Year Assembly Plant Build Dates
F-3502020KentuckyDecember 16, 2019 through September 16, 2020

 

Affected vehicles are identified in OASIS and FSA VIN Lists.

 

REASON FOR THIS SAFETY RECALL

The affected vehicles were ordered with Ambulance Package and “Wide Track” Rear Axle, however, were built with a Standard Rear Axle. Depending on the body installed by the body builder, clearance to the inner Dual Rear Wheel tire may be below the minimum clearance required. This could cause tire contact with the second unit body.  The subsequent tire damage could result in tire blowout which may increase loss of vehicle control on these emergency vehicle applications.

 

SERVICE ACTION

Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to update vehicle with “Wide Track” Rear Axle per technical instructions. This service must be performed on all affected vehicles at no charge to the vehicle owner.

 

OWNER NOTIFICATION AND MAILING SCHEDULE

Owner letters were mailed the week of January 11, 2021. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.

PLEASE NOTE:

Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery. 

 

New! ATTACHMENTS

Attachment I: Administrative Information
Attachment II: Labor Allowances and Parts Ordering Information
Attachment III: Technical Information
Owner Notification Letters

 

QUESTIONS & ASSISTANCE

For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.

Sincerely,

 

David J. Johnson


ATTACHMENT I

Page 1 of 2

NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 20S57 – Supplement 1
Certain 2020 Model Year F-350 Chassis Cab Vehicles built with 7.3L Gas Engine and Ambulance Package
Wide Track Rear Axle Update

 

OASIS ACTIVATION

OASIS was activated on October 1, 2020

 

FSA VIN LISTS ACTIVATION

FSA VIN Lists were made available through https://web.fsavinlists.dealerconnection.com on October 1, 2020. Owner names and addresses were available by week of January 25, 2021.

NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall.

 

SOLD VEHICLES

  • FordeBay has not issued instructions to stop selling/delivering or driving used vehicles under this safety recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles. Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
  • Correct other affected vehicles identified in OASIS which are brought to your dealership.
  • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.

 

STOCK VEHICLES

  • Correct all affected units in your new vehicle inventory before delivery.
  • Use OASIS to identify any affected vehicles in your used vehicle inventory.

 

DEALER-OPERATED RENTAL VEHICLES

The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.

 

TITLE BRANDED / SALVAGED VEHICLES

Affected title branded and salvaged vehicles are eligible for this recall.

 

OWNER REFUNDS

Refunds are not approved for this program.

 

RENTAL VEHICLES

Rental vehicles are not approved for this program.

 

ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)

Additional repairs identified as necessary to complete the FSA should be managed as follows:

  • For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – FordeBay & LincolneBay Program Policies / General Information & Special Circumstances for FSA’s / Related Damage.
  • For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked.
    • FordeBay vehicles – 3 years or 36,000 miles CLAIMS PREPARATION AND SUBMISSION
  • Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
    • When entering claims, select claim type 31: Field Service Action. The FSA number 20S57 is the sub code.
    • For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
  • Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.

IMPORTANT: Click the Related Damage Indicator radio button.


ATTACHMENT II

NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 20S57 – Supplement 1
Certain 2020 Model Year F-350 Chassis Cab Vehicles built with 7.3L Gas Engine and Ambulance Package
Wide Track Rear Axle Update

 

LABOR ALLOWANCES

Description Labor Operation Labor Time
Remove and Install Rear Axle, Build Axle / Check Set ClearancesMT20S57BM Time up to 7.5 Hours

 

New! PARTS REQUIREMENTS / ORDERING INFORMATION

SSSC Web Contact Site:

To place an order for pinion shims, submit a VIN-specific Part Order contact via the SSSC Web Contact Site. 

Part NumberDescription Order Quantity Claim Quantity
20071797 Pinion Shims (Supplied from Dana) 1 0

 

New! PARTS REQUIREMENTS / ORDERING INFORMATION

Part NumberDescription Order Quantity Claim Quantity
HC3Z-4010-NAxle Housing11
HC3Z-4234-GLeft Axle Shaft11
HC3Z-4234-JRight Axle Shaft11
F81Z-1001-AA Safety Recall 20S57 - Wide Track Rear Axle Update - 2020 Ford F-350 | small lightAxle Shaft O-rings (1 per pkg, 2 req)22
HC3Z-00813-AAxle bolts (1 per pkg, 16 req)1616
HC3Z-1S175-BHub Seals (1 per pkg, 2 req)22
HC3Z-4676-APinion Seal (1 per pkg, 1 req)11
HC3Z-00810-AThrust Washer – Tail Bearing (1 per pkg, 1 req)11
HC3Z-383609-APinion Nut Washer (1 per pkg, 1 req)11
HC3Z-00811-APinion Nut (1 per pkg, 1 req)11
HC3Z-4662-BSpacer – Collapsible (1 per pkg, 1 req)11
HC3Z-4630-BBearing Cone – Pinion Head (1 per pkg, 1 req)11
HC3Z-4628-BBearing Cup – Pinion Head (1 per pkg, 1 req)11
HC3Z-4561-CBearing Cone – Pinion Tail (1 per pkg, 1 req)11
HC3Z-4616-BBearing Cup – Pinion Tail (1 per pkg, 1 req)11
XY-80W90-QL Safety Recall 20S57 - Wide Track Rear Axle Update - 2020 Ford F-350 | small lightAxle Fluid (3.37l needed)44
XL-3 Safety Recall 20S57 - Wide Track Rear Axle Update - 2020 Ford F-350 | small lightFriction Modifier11
E4HZ-4A254-A Safety Recall 20S57 - Wide Track Rear Axle Update - 2020 Ford F-350 | small lightU-Joint Straps (1 per pkg,2 req)22
F1HZ-4N272-AU-Joint Bolts (1 per pkg, 4 req)44
HC3Z-00812-BRear Caliper Bracket Bolts (4 per pkg, 8 req)28
W500764-S439Shock Absorber Nuts (4 per pkg, 2 req)12
W520115-S440Shock Absorber Bolts (4 per pkg, 2 req)12
HC3Z-5705-HU-Bolts (1 per pkg, 4 req) 4X2 vehicle44
HC3Z-5705-GU-Bolts (1per pkg, 4 req) 4X4 vehicle
W711310-S441U-Bolt Nuts (4 per pkg, 8 req)28

 

Order your parts through normal order processing channels. To guarantee the shortest delivery time, an emergency order for parts must be placed.

 

DEALER PRICE 

For latest prices, refer to DOES II.

 

PARTS RETENTION, RETURN, & SCRAPPING

Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall.

 

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from FordeBay Customer Service Division in accordance with Policy Procedure Bulletin 4000.


ATTACHMENT III

CERTAIN 2020 F-350 CHASSIS CAB VEHICLES BUILT WITH 7.3L GAS ENGINE AND AMBULANCE PREP PACKAGE — WIDE TRACK REAR AXLE UPDATE

 

SERVICE PROCEDURE

NOTE: Order parts per dealer bulletin, only the ring, pinion and carrier will be reused in new housing.

1. Remove the axle assembly from the vehicle.  Please follow the Workshop Manual (WSM) procedures in Section 205-02B.

2. Remove the differential carrier assembly and axle shafts from the axle assembly. Please follow the WSM procedures in Section 205-02B.

3. Install the differential carrier assembly and new axle shafts onto the new axle assembly. Please follow the WSM procedures in Section 205-02B.

4. Install the new Axle Assembly to the vehicle.  Please follow the WSM procedures in Section 205-02B.

IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. Unless a part is requested to be returned to FordeBay, all parts replaced under this FSA must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Refer to the Parts Retention, Return, & Scrapping section of the FSA dealer bulletin for further information.

 


 


1 Affected Product

Vehicle

MAKEMODELYEAR
FORDeBayF-3502020

 


13 Associated Documents

Owner Notification Letter(Part 577)

RCONL-20V599-6952.pdf 51.775KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [50.56 KB]

 


Manufacturer Notices(to Dealers,etc) – Dealer Notification re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S57 Certain 2020 Model Year F-350 Chassis Cab Vehicles built with 7.3L Gas Engine and Ambulance Package, Wide Track Rear Axle Update

RCMN-20V599-8423.pdf 215.629KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.58 KB]

 


Recall 573 Report-Amendment 2

RCLRPT-20V599-6643.PDF 214.427KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.40 KB]

 


Recall 573 Report-Amendment 1

RCLRPT-20V599-6315.PDF 214.353KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.33 KB]

 


Recall 573 Report

RCLRPT-20V599-7751.PDF 214.353KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.33 KB]

 


Manufacturer Notices(to Dealers,etc) – Dealer Notification re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Advance Notice -Safety Recall 20S57 Certain 2020 Model Year F350 7.3L Gas Engine built with Ambulance Package Wide Track Rear Axle Update

RCMN-20V599-6062.pdf 113.836KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [111.17 KB]

 


Recall Acknowledgement

RCAK-20V599-2825.pdf 244.351KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [287.68 KB]

 


Recall Acknowledgement

RCAK-20V599-2825.pdf 294.589KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [287.68 KB]

 


Recall Quarterly Report #2, 2021-2

RCLQRT-20V599-6880.PDF 211.222KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Manufacturer Notices(to Dealers,etc) – Dealer Bulletin re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S57 – Supplement 1 Certain 2020 Model Year F-350 Chassis Cab Vehicles built with 7.3L Gas Engine and Ambulance Package Wide Track Rear Axle Update

RCMN-20V599-3037.pdf 259.313KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [253.24 KB]

 


Interim Owner Notification Letter(Part 577)

RIONL-20V599-3591.pdf 85.429KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [83.43 KB]

 


Recall Quarterly Report #1, 2021-1

RCLQRT-20V599-3114.PDF 211.122KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall Quarterly Report #3, 2021-3

RCLQRT-20V599-6278.PDF 211.303KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
Wheel Accessories Parts 2 Pcs Wheel Spacers Adapters 8 on 200mm 8x200mm 2.00 Inch Thick M14x1.5 14x1.5 Thread Stud Fits 2019+ Ram 3500 2003+ Ford F350 Dual Rear Wheel Vehicles No Lip
  • 2.00 Inch Thick | Forged 6061 T6 Aluminum | 8 on 200mm 8x200mm Wheel Bolt Pattern | 8 on 200mm 8x200mm Vehicle Bolt Pattern | 142mm ID (Vehicle Hub OD) | 142mm Wheel ID | Thread: M14x1.5 14x1.5 | Black | 2 Pcs
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits
  • SEE DETAILED INSTRUCTIONS IN CONTENT BELOW 1. Lift and safely support vehicle. 2. Remove Wheel. Clean and inspect hub and mounting surface. 3. Install Wheel Spacer. Check hub diameter and that wheel spacer sits flush against mounting surface. Torque fasteners to Manuf. Specs. Check minimum thread engagement (1-1/2 times diameter of thread). Check vehicles wheel studs that they do not protrude past wheel spacer. 4. Reinstall wheel. Torque fasteners to Manuf. Specs.
  • Our spacer adapter provides a precise fit to your vehilce. This spacer is for a wheel hub diameter of 142mm only Fits | Dual Rear Wheel Vehicles Front Wheel Not Hub Centric and Rear Wheel Hub Centric
  • Our spacers are made from Forged 6061 T6 Aluminum. Each spacer is treated with a rust resistant black coating which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle.
Bestseller No. 2
FordeBay F350 Dual Rear Wheel Vehicles No Lip" title="Safety Recall 20S57 - Wide Track Rear Axle Update - 2020 Ford F-350 60">
Wheel Accessories Parts 2 Pcs Steel Wheel Spacers 8 on 200mm 8x200mm 2.00 Inch Thick M14x1.5 14x1.5 Thread Stud Fits 2019+ Ram 3500 2003+ Ford F350 Dual Rear Wheel Vehicles No Lip
  • 2.00 Inch Thick | Forged 1045 Steel | 8 on 200mm 8x200mm Wheel Bolt Pattern | 8 on 200mm 8x200mm Vehicle Bolt Pattern | 142mm ID (Vehicle Hub OD) | 142mm Wheel ID | Thread: M14x1.5 14x1.5 | Black | 2 Pcs
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits
  • SEE DETAILED INSTRUCTIONS IN CONTENT BELOW 1. Lift and safely support vehicle. 2. Remove Wheel. Clean and inspect hub and mounting surface. 3. Install Wheel Spacer. Check hub diameter and that wheel spacer sits flush against mounting surface. Torque fasteners to Manuf. Specs. Check minimum thread engagement (1-1/2 times diameter of thread). Check vehicles wheel studs that they do not protrude past wheel spacer. 4. Reinstall wheel. Torque fasteners to Manuf. Specs.
  • Our spacer adapter provides a precise fit to your vehilce. This spacer is for a wheel hub diameter of 142mm only Fits | Dual Rear Wheel Vehicles Front Wheel Not Hub Centric and Rear Wheel Hub Centric
  • Our spacers are made from Forged 1045 Steel. Each spacer is treated with a rust resistant black coating which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle.
SaleBestseller No. 3
Wheel Accessories Parts 2 Pc Steel Hub Centric Wheel Spacers 8 on 170mm 2.0 Inch Thick 14mm 2.0 Thread Stud Fits 99-04 Ford F250 F350 Super Duty| Single Rear Wheel | Dual Rear Wheel Front Only
  • Specs: Thickness : 2.0 Inch | Forged 1045 Steel | Wheel Bolt Pattern : 8 on 170mm | Vehicle Bolt Pattern : 8 on 170mm | ID (Vehicle) : 124.9mm | OD (Wheel) : 124.9mm | Thread: 14mm 2.0 | Color: Black | 2 Pc
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits
  • HEAVY DUTY for your SUPER DUTY. Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift lowering kits and wider, larger, or high traction tires.
  • Hub Centric Spacer provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This spacer is for a wheel hub diameter of 124.9mm only Fits | Single Rear Wheel Vehicles Front and Rear | Dual Rear Vehicles Front Only
  • Our spacers are made from Forged 1045 Steel. Each spacer is treated with a rust resistant black coating which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle.
Bestseller No. 4
Brake Kit for 4WD 1999-2004 Ford F-350 Super Duty [DUAL REAR WHEEL] Front & Rear Disc Brake Rotors Ceramic Brakes Pads 2000 2001 2002 2003 Replacement: 13.03' inch FRONT Rotor" rel="nofollow noopener sponsored" target="_blank"> Detroit Axle - Brake Kit for 4WD 1999-2004 Ford F-350 Super Duty [DUAL REAR WHEEL] Front & Rear Disc Brake Rotors Ceramic Brakes Pads 2000 2001 2002 2003 Replacement: 13.03" inch FRONT Rotor
  • 4WD Models; w/ 13.03 inch (331mm) Front Rotors & Dual Rear Wheels
  • Replacement for 2000 - 2004 Ford F-350 Super Duty - 1999 Ford F-350 Super Duty Built After (03/22/1999 )
  • Ceramic compounds and copper fibers allow ceramic pads to handle higher brake temperatures with less heat fade, provide faster recovery after the stop and generate less dust. Quieter than semi-metallic pads
  • Brake Rotors are built to exceed OEM Specification and have the proper fit and finish required for superior stopping power
  • 10-Year Warranty
Bestseller No. 5
Pacific Dualies 43-1950 Polished 19.5 Inch 10 Lug Stainless Steel Wheel Simulator Kit for 2005-2021 Ford F450/F550 Truck (Does not fil RV/Motorhome), GRAY
  • Ford wheel simulator
  • Manufactured from 304 stainless steel
  • Over-the-lug mounting style
  • For 2WD and 4WD (wheel drive) vehicles
  • Polished finish
Bestseller No. 6
Vevor Mophorn Polished 19.5" 10 Lug Wheel Simulators Stainless Steel Bolt Kit Hubcap Kit Fit for 2005-2020 Ford F450/F550 2WD Trunk Dually Wheel Cover Set
  • 【304L GRADE STAINLESS STEEL】- Made from 304L stainless steel, capable of resisting corrosion, our simulators which owes an elegant mirror polished finish, is made for longevity and wear-resistant..Fit Type: Vehicle Specific
  • 【GOOD HEAT DISSIPATION】- Every single part of this simulators are well-forged, effectively protect wheels from collision, distortion and broken. With good heat dissipation, it is very durable in use.
  • 【EASY MAINTENANCE】- Our simulators are all made for durable and long service life. Once installed, there's no need to worry about changing them.
  • 【BOLT-ON MOUNTING】- Original precision version for special car, based on bolt-on mounting style, perfectly fit for your vehicle and easy to install.
  • 【VEHICLE FITMENT】-This stainless wheel simulators is perfectly fits for 2005-2020 Ford Super Duty F450/F550 10 Lug 2WD 4WD Dually model ONLY, Triple Chrome Plated 19.5" Wheel Simulator Cover Set.
SaleBestseller No. 7
Wheel Accessories Parts 2 Pcs Hub Centric Wheel Spacers 8 on 200mm 8x200mm 2.00 Inch Thick M14x1.5 14x1.5 Thread Stud Fits 2019+ Ram 3500 2003+ Ford F350 Dual Rear Wheel Vehicles No Lip
  • 2.00 Inch Thick | Forged 6061 T6 Aluminum | 8 on 200mm 8x200mm Wheel Bolt Pattern | 8 on 200mm 8x200mm Vehicle Bolt Pattern | 142mm ID (Vehicle Hub OD) | 142mm Wheel ID | Thread: M14x1.5 14x1.5 | Black | 2 Pcs
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits
  • SEE DETAILED INSTRUCTIONS IN CONTENT BELOW 1. Lift and safely support vehicle. 2. Remove Wheel. Clean and inspect hub and mounting surface. 3. Install Wheel Spacer. Check hub diameter and that wheel spacer sits flush against mounting surface. Torque fasteners to Manuf. Specs. Check minimum thread engagement (1-1/2 times diameter of thread). Check vehicles wheel studs that they do not protrude past wheel spacer. 4. Reinstall wheel. Torque fasteners to Manuf. Specs.
  • Hub Centric Spacer provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This spacer is for a wheel hub diameter of 142mm only Fits | Dually Vehicles Front Wheel Only
  • Our spacers are made from Forged 6061 T6 Aluminum. Each spacer is treated with a rust resistant black coating which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle.
Bestseller No. 8
Husky Liners - Rear Mud Guards | 1999 - 2010 Ford F-350/F - 450 w/ Dual Rear Wheels, Rear Set - Black, 2 Pc. | 57451
  • FITMENT — 1999-2010 Ford F-350/F-450 w/ Dual Rear Wheels 2 Pcs
  • FITS LIKE FACTORY — Built specifically for your make and model providing that perfectly tailored fit. Available in full-tread coverage for single- or dually-factory tire width.
  • IMPACT RESISTANT CONSTRUCTION — Built to stand up to a lifetime of abuse thanks to its nail-tough, impact-resistant thermoplastic construction. With proprietary Husky Shield Film for an invisible layer of protection.
  • EASY TO INSTALL — A few screws and a few minutes are all it takes to mount Mud Guards for a perfect match to your vehicle every time.
  • UPGRADED LOOKS — An instant improvement for your vehicle’s appearance with sleek style that looks like it came from the factory, with some added custom flair.
Bestseller No. 9
Wheel Accessories Parts 2 Pcs Hub Centric Wheel Spacers 8 on 170mm 2.00" Thick 14mm 2.0 Thread Stud 124.9mm Hub Fits 99-04 Ford F250 F350 Super Duty| Single Rear Wheel | Dual Rear Wheel Front Only
  • Specs: Thickness: 2.00" | Forged 6061 T6 Aluminum | Wheel Bolt Pattern: 8 on 170mm | Vehicle Bolt Pattern: 8 on 170mm | ID (Vehicle ): 124.9mm | OD (Wheel ): 124.9mm | Thread: M14 x 2.0 | Color: Black | 2 Pcs
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits Ford 2000-02 Excursion | 1999 F-250 | 1999-2003 F-250 F-350 Super Duty
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift lowering kits and wider, larger, or high traction tires.
  • Hub Centric Spacer provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This spacer is for a wheel hub diameter of 124.9mm only Fits | Single Rear Wheel Vehicles Front and Rear | Dual Rear Vehicles Front Only
  • Our spacers are made from Forged 6061 T6 Aluminum. Each spacer is treated with a rust resistant black coating which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle.
Bestseller No. 10
Detroit Axle - Rear Disc Replacement Brake Rotors Ceramic Pads w/Hardware for 2005-2012 Ford F-350 Super Duty - Models With Dual Rear Wheels
  • For - 2005 - 2012 Ford F-350 Super Duty - Models With Dual Rear Wheels
  • Brake Rotors are built to exceed OEM Specification and have the proper fit and finish required for superior stopping power.
  • Ceramic compounds and copper fibers allow ceramic pads to handle higher brake temperatures with less heat fade, provide faster recovery after the stop and generate less dust. Quieter than semi-metallic pads;
  • Built to strict quality control standards
  • 10 Year Warranty

Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...