NHTSA ID Number: 10148705
Manufacturer Communication Number: TSB 18-2301
Some 2014-2016 F-Super Duty vehicles built on or before 11-Nov-2015 equipped with a 6.7L engine may exhibit an illuminated MIL with DTCs P04DB, P04E2 and/or P04E3 stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
12 Affected Products
TECHNICAL SERVICE BULLETIN
6.7L – Illuminated Malfunction Indicator Lamp (MIL) – Diagnostic Trouble Codes (DTCs) P04DB, P04E2 And/Or P04E3 – Built On Or Before 11-Nov2015
01 October 2018
2014-2016 F-Super Duty
Issue: Some 2014-2016 F-Super Duty vehicles built on or before 11-Nov-2015 equipped with a 6.7L engine may exhibit an illuminated MIL with DTCs P04DB, P04E2 and/or P04E3 stored in the powertrain control module (PCM).
Action: Follow the Service Procedure steps to correct the condition.
|Crankcase Ventilation Collar Kit||1||FC3Z-6A603-A|
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
|2014-2016 F-Super Duty 6.7L: Retrieve DTCs, Install The Crankcase Ventilation Collar Kit And Reprogram The PCM (Do Not Use With Any Other Labor Operations)||182301A||0.7|
|1/4″||11 mm Deep Socket|
|Long Flat Screwdriver|
- Is the vehicle a 2014-2016 F-Super Duty equipped with a 6.7L engine and built on or before 11-Nov-2015?
(1). Yes – proceed to Step 2.
(2). No – this article does not apply. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for normal diagnostics.
- Using the appropriate Ford scan tool, retrieve DTCs. Are DTCs P04DB, P04E2 and/or P04E3 stored in the PCM?
(1). Yes – proceed to Step 3.
(2). No – this article does not apply. Refer to the PC/ED Manual for normal diagnostics.
- Install the crankcase ventilation collar kit on top of the existing crankcase ventilation oil separator assembly. Refer to the instructions included with the kit.
- Reprogram the PCM using the latest version of the appropriate Ford scan tool.
1 Associated Document
01 October 2018
|Diagnostic Software||Interface Device||Complete Vehicle Diagnostics||Module Programming|
|IDS/FDRS||VCM, VCM II, VCMM||X||X||X||X|
|FJDS/FDRS||Compatible J2534 Devices|
(Including VCM II and VCMM)
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
|CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool|
|VSI J2534 ECU Reprogrammer|
|Drew Tech Mongoose Pro USB to CAN ISO9141 Interface|
- 🚗【Key Programming + IMMO Function】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly. Please send VIN to⭐[email protected]⭐ to check compatibility. 2020 𝙣𝙚𝙬𝙚𝙨𝙩 𝙫𝙚𝙧𝙨𝙞𝙤𝙣. 【Officially identified as genuine by 🅰🆄🆃🅴🅻】
- 🚗【Advanced XP400 Programmer】XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc
- 🚗【ADVANCED IMMO + J2534 MaxiFlash】Immobilizer is also known as immo box which is to auto part that recognizes the vehicle key directly. MaxiFlash specially designed to provide users with convenient PC communication on any modern vehicle diagnostic, and offer the most significant features desired by OEM customers: reliability, fast performance and flexibility. The working range for BT communication is about 210 feet (70 m). ▲The J2534 Can't Program ECU With IM608▲
- 🚗【ACTIVE TEST + ECU CODING + 23 RESET SERVICE】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.Powerful OE level diagnostics for more than 80 US, Asian and European makes and models.
- 🚗【(US ONLY) 1 YEAR FREE UPDATE + PERMANENT After-Sales SERVICE】▲IM608 just can be used in US. Please don't switch the IP or the device will be locked!▲ 🎗🎗𝙊𝘽𝘿𝙋𝙍𝙄𝘾𝙀 𝙞𝙨 𝙩𝙝𝙚 𝙚𝙖𝙧𝙡𝙞𝙚𝙨𝙩 𝙤𝙛𝙛𝙞𝙘𝙞𝙖𝙡 𝙖𝙪𝙩𝙝𝙤𝙧𝙞𝙯𝙚𝙙 𝘼𝙪𝙩𝙚𝙡 𝘿𝙚𝙖𝙧𝙡𝙚𝙧. 🚔💥𝙁𝙤𝙧 𝙦𝙪𝙡𝙞𝙩𝙮 𝙞𝙨𝙨𝙪𝙚, 𝙥𝙡𝙚𝙖𝙨𝙚 𝙘𝙤𝙣𝙩𝙖𝙘𝙩: 𝙖𝙪𝙩𝙚𝙡𝙤𝙗𝙙[email protected]𝙝𝙤𝙩𝙢𝙖𝙞𝙡.𝙘𝙤𝙢 𝙩𝙤 𝙜𝙚𝙩 𝙧𝙚𝙨𝙤𝙡𝙪𝙩𝙞𝙤𝙣💥
- [Vehicle Coverage] One device Compatible for Ford and Compatible for Mazda, Support vehicle till 2018 year. (Can't Support Ford F-150 ). Support Automatic Vehicle Recognition.
- [ECU Functions] Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.). Live Data-stream with Recording & Playback Functions for Main ECUs. New Software Re-flash for Existing ECUs.
- [Functional] Connect via USB. Support Read & Clear Diagnostic Trouble Codes (DTCs); Set, Adjust or Remove Speed Governors; Steering Angle Resets, Guided Fault Finding&All Other Dealer Functions.
- 【Update】 Update by CD with Unlocked Firmware. ★Please Note: If you have any problem when you install the software, please feel free to contact us, our technology team will provide customers service to help you solve the problem. Multilingual: Support English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil).
- 🚩🚩🚩Please download the latest vxmanager from vxdiag official website. Use new vxmanager to update firmware and driver and then update your device authorization.
- Wireless connection - simple plug and play configuration Upgraded support includes 802 11bgn
- High Speed USB 2 0 Connection with improved protection and faster performance
- Improved stability during engine crank with extended temperature range
- Enclosure design protects from exposure to fluids and drops
- Additional vehicle communications protocols include upcoming Global B vehicles with faster data buses SAE J2534 and ISO-22900 compliant
- 16Pin MINI VCI OBD2 USB Interface Scan Cable for Toyota - MINI VCI for TIS Techstream supports TIS OEM diagnostic soft ware and all the diagnostic communication protocols needed for Toyota since 1996, for diagnose, coding etc.
- MINI VCI Cable Diagnostic Test Scanner Function - MINI VCI check engine light shut off, multi-language interface, freeze frame displays, internet updateable, user friendly and others function, heavy duty thick-shielded cable for best test results.
- 16Pin OBD2 MINI VCI Diagnostic USB Cable Supported Protocols - K-Line ISO 9141, KWP 2000 ISO 14230-4, SAE J1850 PWM, SAE J1850 VPW, CAN 2.0B ISO 11898, CAN ISO 15765-4. Firmware version is 1.4.1, Techstream version V14.30.023
- Mini VCI diagnostic cable compatible with (32bit/64bit) Win XP/ Win7/ Win 10, recommended Operating System is Win7, and the installation need uninstall the virus protector. Firewall and defender need to be closed in case it damages the software.
- What You Will Get - We offer mini VCI cable 24 month service, any questions about OBDII cable converter adaptor, or if you need Techstream_Setup_V15.00.026 version, pls contact us, the Techstream software will be sent to you by Email, we will reply you within 12 hours. You will get a MINI VCI cable scan tool, with CD inside the package, include 1. Mini VCI Driver for TOYOTA _1.4.1. 2. Techstream_Setup_V14.30.023. 3. Techstream Patch 32bit. 4. Techstream Patch 64bit 5. Install Video
- 【XP400 Key Programmer for IMMO & VCI-J2534 Programming】: The XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, Freescale 9S12 MCUs. The J2534 is a fully compliant SAE J2534-1/J2534-2 device, specially designed to provide users with PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus and offer the most significant features by OEM Customers.
- 【Reliable Key Programmer & ECU Programming Tools】: Equipped with XP400 key programmer and MaxiFlash ECU re-programmer, this Autel scanner performs IMMO Add Key, All Key Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
- 【All System Diagnostic & Advanced Maintenance Services】: Autel Diagnostics application can access the ECM of various vehicle control systems after VCI connection. The Maintenance Service covers Oil Reset/EPB/TPMS(sensor activate)/BMS/ABS(brake bleeding)/Aftertreatment/IMMO(advanced IMMO & key programming)/Injector/SAS/Suspension/Throttle/Win Dr Roof/Seats/Odometer/Lang Change/Headlamp/CHG tire size/TEC learn/SRS/Cylinder/VGT learn/Speed&PTO/Clutch/Trans adaption/Airbad reset/AF setting ...more
- 【Active Test & ECU Coding】: During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, betweentwo operating states. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
- 【1 Year Warranty with 45Days Replacement & Free Software Updated】: One Year Free updated through Autel Update Application. The IM608 Tablet automatically searches for available updates for all of the MaxiIM components when it's connected to the Internet. 7*24hours Local Technical Support & Satisfaction Guarantee. So Click“Buy it now”and enjoy a high-quality product with confidence. (If you need to confirm your car model, pls message us: )
- 🎉🎉【Unparalleled IMMO & Key Programming】Autel immobilizer key programmer IM608, upgraded of IM508, is favored by professionals and locksmiths to encrypt keys, add keys, change keys, and generate keys. It enjoys the easiest way to read/write various key chips with 100% successful rate. IM608 offers Smart Mode and Expert Mode to guide you do IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc.
- 💯【Advanced ECU Coding & Active Test】Autel IM608 makes coding easy, fast and profound, whether remembering settings for Start/Stop systems, activating cornering headlights with fog lights, or enabling functions of the comfort module. Active test, also known as bi-directional control, helps you accurately figure out whether a specific subsystem or component goes well. This function may appear as Actuators, Actuator Test, or Function Tests, all these could be completed in several minutes.
- 💯【XP400 Programmer & Wireless J2534 VCI】XP 400 key programmer, worth 700$, is used to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data. Equipped with XP400 key programmer and MaxiFlash ECU reprogrammer, IM608 performs IMMO Add Key, Keys Lost and Key Learning for 3rd generation Benz.
- 💯【Oil Reset/EPB/SAS/DPF/BMS/TPMS】Autel IM608, though a professional key programmer, enjoys 30+maintenance functions, which are the same as that of Maxicom MK908P and Maxisys Elite, covering Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, ABS/SRS, Cylinder, Turbocharging, Limit, Clutch, Trans Adaption, Airbag Reset, etc.. With reasonable price, IM608 is a true all-in-one auto scanner.
- 🎉🎉【Original Product with Reliable Service】One of the worries of online purchasing is about after-sales service. But please be informed we are a 8-year old seller with good records. We offer 100% Autel original products. Our Autel IM608 comes with 1-year warranty and free online update. 30-days free return policy also encourages you to have a try. Any problems, welcome to contact [email protected] or send us Amazon messages. WE ARE ALWAYS HERE FOR YOU.
- Designed for CV ➤ Autel MaxiSys MS908CV boasts the pro-level diagnostics for Commercial Vehicles (Expert, Buses & Trucks), to get all module access for ECU Coding, Active Test (Bi-directional Control), 23 Adaptation Services, 25 Service Functions, Read/Erase Codes and Live Data, etc., being compatible with multiple supported protocols: SAE J1939, SAEJ1708, Manufacture-defined protocol J1939, Manufacture-defined J1708, KWP, VPW, UDS-CAN, CDL.
- ECU Coding ➤ This Heavy Duty diagnostic tool allows you to re-flash the commercial vehicles’ control modules, and write in adaptive data for certain components after making repairs or replacements, to fix the issues as: Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts, etc. (Note: Coding only changes preprogrammed options already existent in the software.)
- 23 Adaption Functions ➤ This commercial vehicle scanner provides various 23 component adaptation services, to calibrate or reset certain components after repair or replacement as: DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Accurate Reset, After Treatment Maintenance, Calibration of Rack Sensor, Calibration of Injector Trim, and others, with fast navigation for optimal efficiency.
- 25 Service Functions ➤ This automotive diagnostic tool can Read/Clear codes, view graphic Live Data, and features an array of 25 guided maintenance services as: Oil Reset, Injector Coding, DPF, EPB, ABS/SRS, Suspension, Throttle, Odometer, Lang Change, Headlamp, CHG Tire Size, Airbag Reset, Cylinder, Turbocharging, Limit, Clutch, WIN DR ROOF, TEC Learn, Trans Adaption, Immo Keys, TPMS, BMS, Brake Bleed, Seats etc.
- Ultimate Scanner ➤ Autel MS908CV gives you all necessary functionalities, while still remaining easy to use with boosted multitasking performance: Android 4.0 operating system, Quad-Core Processor, 2GM RAM & 32GB SSD, 9.7" 1024*768 IPS Screen, 11000 mAh Battery (8hrs non-stop operation), 5.0M AF Rear Camera, etc., and a whole set of adapters and probes at your disposal. This scanner is entitled to 1-year warranty with 1-year FREE software update. Welcome to contact us for your vehicle’s compatibility check, 24/7.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- VXDIAG VCX Nano support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- Small size, easy to carry and convenient for us.Please download the latest vxmanager from vxdiag official website. Use new vxmanager to update firmware and driver and then update your device authorization.
- We provide full time online support, if you have any questions about our device, please feel free to contact us online via ask us a question or send us email
- 【IMMO】: Autel MaxiIM IM608, with the worldwide first Smart Mode and Expert Mode, guides customers to perform IMMO-related functions. Smart Mode: step-by-step through a series of functions, for guided and automated key learning; Expert Mode: select a specific function, for advanced key learning functions.
- 【ECU Coding】: Autel scanner IM608, coming with advanced ECU Coding capability, allows users to update the computer software on the vehicle to the latest version, to reprogram adaptive values for certain components after making repairs and replacements, or to program on specific control modules for individual customization.
- 【30+ Service Functions】: Autel diagnostic scanner IM608 is not only a professional key programmer but an overall maintenance scanner with over 30 service functions including Oil reset, EPB, BMS, SAS, DPF Service, etc. These special functions work powerfully and smoothly on 80+ vehicles makes. As a top diagnostic scan tool with full maintenance functions, Autel IM608 can solve 98% of vehicle problems.
- 【All Systems Diagnostic & Active Test】: Autel MaxiIM IM608 is designed to improve mechanics work efficiency. With the OE-level full-system diagnosis, mechanics can read/erase DTCs and view data stream of ALL systems, including engine, transmission, ABS, SRS, and more. Active Test is capable of outputting a command to the ECU to drive the actuators, thus to quickly check the integrity of the system or subsystems.
- 【XP400 & J2534】: We offer free XP400 & J2534 which worth 1500$ dollars if you buy separately, and we give free battery tester AB101. This 12v car auto battery load tester is convenient for you to know the condition of cranking and charging system. Any questions, contact [email protected] for sure.Please send your address to us after placing an order to get the gift for free.
- VXDIAG VCX 2 in 1 works for both Ford and Mazda, support Ford and Mazda Diagnose and Programming.(Please download the latest vxmanager from vxdiag official website. Use new vxmanager to update firmware and driver and then update your device authorization.)
- Worth to own: Support J2534 protocol, this device actually works faster than Obdlink MX and ELM327 devices with Forscan, it can also works with FJDS license for programming. This is a great alternative to buying an expensive VCM2 for programming modules
- Support vehicle till 2019 year（Not works for FORD F150,F250,F350,F450,F550,F650,F750 before 2010）,Support Multi-Languages
- VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of Ford and Mazda. It can be compatible with OEM software of Ford IDS and Mazda IDS
- Full Technical Support Online: Firmware support update online. For software installation, you can feel free to contact us via amazon message, our engineer will provide online support by teamviewer or video
Last update on 2020-10-21 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-10-21 / Affiliate links / Images from Amazon Product Advertising API