| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10143375
Manufacturer Communication Number: CBC-2018-001
Summary
OEM AC line inspection
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
FORD | TRANSIT | 2016 |
Dear Collins Bus Corporation Customer
Date: June 8th, 2018
Subject: OEM AC Line Inspection.
Models Affected: Collins Bus Transit Gas 55K AC
Notes: This instructional document is intended to assist Collins Bus distributors, their customers and/or service shops in the proper techniques for repair and maintenance. Issues described in this document may not apply to all Collins Bus units. Authorized technicians will be able to decide whether or not a unit with similar issues will benefit from the provided information.
Details: Information contained in this document will help you determine and inspect the OEM AC line on certain Collins Bus Transit Gas Ford models. Please follow the instructions provided with each picture for details on this potential issue and suggested repair.
Supplied Parts for Collins Bus Transit: Worm drive clamp, 3” piece protective hose
Tools needed for Transit Models: Large flat blade screw driver, 5/16” socket
Collins Transit Diesel Model 55k AC
- Pull hood release.
- Open and prop the hood. Location to inspect: On the driver’s side there is a cooler housing on the right side of the radiator.
- Remove the two screws securing the headlight assembly.
- Remove headlight assembly to access AC line. NOTE: Pull assembly forward towards front to remove
- Location: On driver’s side there is a cooler housing that will have an A/C line coming out from behind it.
- This could come straight over the top or off to the driver’s side of the cooler.
- Place the supplied split hose around AC line and make certain the split is facing towards the firewall.
- Open supplied worm drive clamp.
- Place supplied clamp around protective hose and tightened at top of supplied hose. Note: Make certain there is adequate clearance between clamp and cooler.
- Re-install headlight assembly and secure with the two screws.
Inspecting/Securing AC Line.
$22.50 per Unit
We regret the inconvenience this service may cause you. Please be assured that Collins Bus Corporation is striving to build our buses with the best value and safety available. Thank you for your cooperation in this matter. If you have questions about anything contained in this document please contact
Randy Keesling,
(Customer Service Coordinator for Collins Bus)
1-800-533-1850 ext 414
Sincerely,
COLLINS BUS CORPORATION
1 Associated Document
Manufacturer Communications
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10143225
Manufacturer Communication Number: CBC-2018-001
Summary
OEM AC line inspection
1 Associated Document
Manufacturer Communications
Loading...
- Universal - ZeroR AC Refrigerant is a hydrocarbon that safely bonds with chemicals like R134a, R1234YF and R12. We can only advertise this product to be used in R134a systems due to EPA regulations in the USA on both R12 and R1234YF systems. EPA also prohibits mixing refrigerant types. See the description for all legal disclaimers.
- Easy - This product installs just as easily as any R134a products. Cans even have R134a threads and the majority of R134a can taps will work for these cans.
- 6oz Cans - Refrigerants are compressed gasses and are measured by weight, not by liquid volume such as water. All gasses compress differently and produce a different weight. ZeroR AC Refrigerant is low weight compared to R134a, but its performance is equal to 16oz of R134a.
- Eco Friendly – ZeroR AC Refrigerant is a 100% Natural gas unlike R134a, R1234yf and R12.
- Safe – ZeroR AC Refrigerant has a class 2.1 flammability rating just like the new R1234YF which is now used in 100% of newly manufactured vehicles. Under normal operating conditions this product presents no danger to its users when handled properly and used in systems approved for flammable refrigerants.
- Approved for use in California
- High Mileage refrigerant for vehicles over 75, 000 miles
- Contains approximately 10 oz. of R-134a and 2 oz. of additives
- Contains leak sealer to seal common A/C leaks in rubber hoses, gaskets, and O-rings
- Contains high mileage No wear additives
- This item cannot be shipped to Washington or California
- Contains approximately 1.5oz of refrigerant and 1.5oz of additives
- Repairs Metal Leaks in evaporators, condensers, compressors, accumulators and receiver dryers
- Seals Rubber Leaks in O-rings, gaskets, and hoses
- With red dye for detecting leaks too large to repair
- Reusable dispensing hose designed for compliance and to work only with R-134a cans with self-sealing valve can tops
- Replaces lost R-134a refrigerant and oil in automotive A/C system
- System safe stop leak sealer stops most common A/C leaks with hoses, gaskets and O-Rings
- Special anti-wear additives extend system life and improve performance
- Contains R-134a gas which is acceptable for use in motor vehicle A/C (MVAC) systems
- Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans
- Digital gauge with guided command
- Guided Commands eliminate the guesswork
- 24” Long Hose
- Trigger Dispenser
- Quick Connect Coupler
- Universal PAG R134a Oil Charge, 4 oz. (9145)
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.