| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10165707
Manufacturer Communication Number: TSB 19-2287
Summary
Some 2013-2016 Escape vehicles equipped with a 1.6L EcoBoost engine may exhibit a lack of cooling caused by the A/C inlet line breaking at the compressor. This may be due to the oil cooler coolant lines exerting excess pressure on the A/C inlet line. When replacing the A/C inlet line, a support clip for the oil cooler coolant line should be installed to prevent contacting the A/C inlet line. To correct the condition, follow the Service Procedure steps to replace the A/C inlet line and adjust the gap between the A/C inlet line and the CAC hose.
4 Affected Products
Vehicle
FORD | ESCAPE | 2013-2016 |
This bulletin supersedes 18-2314. Reason for update: Incorrect or Missing Parts
Model:
2013-2016 Escape
Summary
This article supersedes TSB 18-2314 to update the Parts List.
Issue: Some 2013-2016 Escape vehicles equipped with a 1.6L EcoBoost engine may exhibit a lack of cooling caused by the A/C inlet line breaking at the compressor. This may be due to the oil cooler coolant lines exerting excess pressure on the A/C inlet line. When replacing the A/C inlet line, a support clip for the oil cooler coolant line should be installed to prevent contacting the A/C inlet line. To correct the condition, follow the Service Procedure steps to replace the A/C inlet line and adjust the gap between the A/C inlet line and the CAC hose.
Action: Follow the Service Procedure to correct the condition on vehicles that meet all of the following criteria:
- 2013-2016 Escape
- 6L engine
- Lack of A/C cooling
- A/C inlet line broken at the compressor connection
Parts
| Description | Quantity | Part Number |
| A/C Inlet Line | 1 | CV6Z-19D742-F |
| Zip-Tie Retainer Clip (Package Contains 50 Pieces, 1 Piece Required) | As Needed | JU5Z-14A163-MA |
| Receiver Drier Element | 1 | FC3Z-19C836-A |
| Rotunda Urethane Tape | 1 | 164-R9402 |
| Rotunda Ultra High Molecular Weight (UHMW) Tape | 1 | 164-R4904 |
| Motorcraft® PAG Refrigerant Compressor Oil | As Needed | YN-12-D  |
| Motorcraft® R134a Refrigerant (All Markets Except Canada) | As Needed | YN-19 |
| R134a Refrigerant (Canada Only) | As Needed | CYN-19-R |
Service Procedure
- Replace the A/C inlet line. Refer to Workshop Manual (WSM), Section 412-00. Do not install the underbody shield and retainers at this time.
- Loosen the clamp, remove the nut and decouple the charge air cooler (CAC) outlet pipe connection. (Figure 1)
- Install the zip tie retainer clip to reposition the oil cooler coolant hoses. (1). Install a zip-tie into the retainer clip. (Figure 2)
(2). Loosely install the zip tie retainer onto the oil cooler coolant hose.
(3). Slide the retainer up the coolant hose and insert the retainer clip onto the transmission oil pan stud above the CAC hose. (Figure 3)
(4). Position the coolant hoses so that there is a 32mm (1.25 in) distance between the A/C inlet line and the lowest point of the coolant hoses and tighten the zip tie to hold the hoses in place. (Figure 4)
- Make sure when repositioning the coolant hoses that they are not kinked or restricted in any way.
- Cut a 76 mm (3 inch) strip of urethane tape and install the tape onto the CAC outlet pipe where it contacts the oil cooler coolant hoses. (Figures 5-6)
- Install a piece of ultra high molecular weight (UHMW) tape over the urethane tape to act a secondary adhesion layer. (Figure 7)
- Install the CAC outlet pipe, nut and tighten the clamp. (Figure 1)
- Replace the A/C receiver drier element. Refer to WSM Section 412-00.
- Install the underbody shield and retainers. Refer to WSM, Section 412-00.
- Recharge the A/C system. Refer to WSM, Section 412-00.
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN
1.6L – Lack Of Cooling – Broken Air Conditioning (A/C) Inlet Line
– Replacement And Support Clip Installation
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| 2013-2016 Escape 1.6L: Inspect, Replace And Secure The A/C Inlet Line
Following The Service Procedure Includes Time To Replace The Receiver Drier Element (Do Not Use With Any Other Labor Operations) |
192287A | 2.5 Hrs. |
Repair/Claim Coding
Causal Part: 19D742
Condition Code: 01
19-2287
20 September 2019
Loading...
Reload document 
Open in new tab
18-2314
17 October 2018
Loading...
- Universal - ZeroR AC Refrigerant is a hydrocarbon that safely bonds with chemicals like R134a, R1234YF and R12. We can only advertise this product to be used in R134a systems due to EPA regulations in the USA on both R12 and R1234YF systems. EPA also prohibits mixing refrigerant types. See the description for all legal disclaimers.
- Easy - This product installs just as easily as any R134a products. Cans even have R134a threads and the majority of R134a can taps will work for these cans.
- 6oz Cans - Refrigerants are compressed gasses and are measured by weight, not by liquid volume such as water. All gasses compress differently and produce a different weight. ZeroR AC Refrigerant is low weight compared to R134a, but its performance is equal to 16oz of R134a.
- Eco Friendly – ZeroR AC Refrigerant is a 100% Natural gas unlike R134a, R1234yf and R12.
- Safe – ZeroR AC Refrigerant has a class 2.1 flammability rating just like the new R1234YF which is now used in 100% of newly manufactured vehicles. Under normal operating conditions this product presents no danger to its users when handled properly and used in systems approved for flammable refrigerants.
- Approved for use in California
- High Mileage refrigerant for vehicles over 75, 000 miles
- Contains approximately 10 oz. of R-134a and 2 oz. of additives
- Contains leak sealer to seal common A/C leaks in rubber hoses, gaskets, and O-rings
- Contains high mileage No wear additives
- This item cannot be shipped to Washington or California
- Contains approximately 1.5oz of refrigerant and 1.5oz of additives
- Repairs Metal Leaks in evaporators, condensers, compressors, accumulators and receiver dryers
- Seals Rubber Leaks in O-rings, gaskets, and hoses
- With red dye for detecting leaks too large to repair
- Reusable dispensing hose designed for compliance and to work only with R-134a cans with self-sealing valve can tops
- Replaces lost R-134a refrigerant and oil in automotive A/C system
- System safe stop leak sealer stops most common A/C leaks with hoses, gaskets and O-Rings
- Special anti-wear additives extend system life and improve performance
- Contains R-134a gas which is acceptable for use in motor vehicle A/C (MVAC) systems
- Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans
- Digital gauge with guided command
- Guided Commands eliminate the guesswork
- 24” Long Hose
- Trigger Dispenser
- Quick Connect Coupler
- Universal PAG R134a Oil Charge, 4 oz. (9145)
Last update on 2025-05-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.