SYNC Programming Control 14 Error – 2008-2017 Ford/Lincoln/Mercury

“This site contains affiliate links for which OEMDTC may be compensated”

2008-2017 Ford/Lincoln/Mercury Vehicles Equipped With SYNCSYNC Programming Control 14 Error

Some 2008-2017 Ford/Lincoln/Mercury vehicles equipped with SYNC may experience a Control 14 error on the Installapps.aspx page during programming of the Accessory Protocol Interface Module (APIM).

 

Engineering has corrected many of the issues and APIM programming can now be resumed.

If programming errors are encountered refer to GSB G0000112 for reference.

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device SYNC Programming Control 14 Error - 2008-2017 Ford/Lincoln/Mercury | small light SYNC Programming Control 14 Error - 2008-2017 Ford/Lincoln/Mercury | small light SYNC Programming Control 14 Error - 2008-2017 Ford/Lincoln/Mercury | small light SYNC Programming Control 14 Error - 2008-2017 Ford/Lincoln/Mercury | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...