Manual Transmission No Crank - 2015-2017 Ford Mustang

“This site contains affiliate links for which OEMDTC may be compensated”

TSB 16-0103	MANUAL TRANSMISSION – NO CRANK – BUILT ON OR BEFORE 6/15/2016
Publication Date: August 10, 2016

FORD:

2015-2017 Mustang

ISSUE:

Some 2015-2017 Mustang vehicles equipped with a manual transmission and built on or before 6/15/2016 may exhibit a no crank condition due to the clutch pedal position (CPP) switch being damaged.

ACTION:

Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

Inspect the CPP switch for physical damage. Is the CPP switch damaged?
1. Yes – proceed to Step 2.
1. No – this article does not apply.

Install a new CPP switch and bracket. Refer to Workshop Manual (WSM), Section 303-14. The switch includes a plastic bracket rotating the connector 90 degrees. (Figure 1)

Figure 1

PART NUMBER	PART NAME
HR3Z-11A152-A	Clutch Pedal Switch

OPERATION	DESCRIPTION	TIME
160103A	2015-2017 Mustang Manual Transmission: Inspect And Replace The CPP Switch And Bracket (Do Not Use With Any Other Labor Operations)	0.3 Hr.

WARRANTY STATUS

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.