Sun Visor Vanity Mirror Door will not Close or is Loose – 2012-2013 Ford

TSB 13-5-30	SUN VISOR VANITY MIRROR DOOR WILL NOT CLOSE OR IS LOOSE – BUILT ON OR BEFORE 8/31/2012
Publication Date: May 29, 2013

 

FORD:

2012-2013 Mustang 2012 Escape 2012-2013 Explorer, F-150

 

ISSUE:

Some 2012 Escape, 2012-2013 F-150, Explorer and Mustang vehicles built on or before 8/31/2012 may exhibit a sun visor vanity mirror door that will not close or is loose. This may cause the mirror light to stay on.

 

ACTION:

Follow the Service Procedure Steps to correct the condition.

 

SERVICE PROCEDURE

1. Using a small flat head screw driver, remove plastic light cover by pushing out to the right. (Figure 1)
   
   Figure 1 – Article 13-5-30
2. Remove the two (2) phillips screws attaching vanity mirror to the sun visor.
3. Using flat head screw driver, pop up right side of vanity, slide to the right to remove vanity.
4. Carefully remove switch assembly and light socket and bulb from retaining clip and pegs. (Figure 2)
   
   Figure 2 – Article 13-5-30
5. Line up switch assembly and light socket with retaining clip and pegs in the new vanity mirror and snap into place.
6. Insert vanity slightly on an angle left to right back into visor, ensuring pegs on visor engage holes in vanity assembly.
7. Attach vanity to visor with the two (2) screws and reinsert plastic light cover.

 

PART NUMBER	PART NAME
CL3Z-1504098-AA	Vanity Mirror (Adobe)
CL3Z-1504098-AB	Vanity Mirror (Light Stone)
CL3Z-1504098-AC	Vanity Mirror (Charcoal Black)
CL3Z-1504098-AD	Vanity Mirror (Gray)
CL3Z-1504098-AE	Vanity Mirror (Cashmere)

 

WARRANTY STATUS:

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

OPERATION	DESCRIPTION	TIME
130530A	Replace One (1) Vanity Mirror Following Service Procedure (Do Not Use With Any Other Labor Operations)	0.2 Hr.
130530B	Replace Both (2) Vanity Mirrors Following Service Procedure (Do Not Use With Any Other Labor Operations)	0.3 Hr.

 

DEALER CODING

BASIC PART NO.	CONDITION CODE
7004104	33