| “This site contains affiliate links for which OEMDTC may be compensated” |
SSM 46026 – 2017 F-Super Duty – New Upfitter Module – Generic Function Module 2 (GFM2) – Programming Service Awareness
Some 2017 F-Super Duty vehicles may be equipped with a new upfitter module, designated as generic function module 2 (GFM2), which may require additional programming by the upfitter if the module is replaced.
This data must be obtained directly from the upfitter company and contact information should be obtained from the customer or may be found in information placed on the vehicle by the upfitter, typically in the door opening.
APPLICABLE VEHICLES
2017 TRUCK: FE P558 SUPER DUTY – NA
https://static.nhtsa.gov/odi/tsbs/2016/SB-10092569-5448.pdf
Loading...
Reload document 
Open in new tab
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
