| “This site contains affiliate links for which OEMDTC may be compensated” |
| ADAPTIVE CRUISE CONTROL – REDUCTION IN SPEED WHEN PASSING A SEMITRAILER TRUCK |
| FORD: | 2013-2014 Edge |
2013-2014 Edge vehicles equipped with Adaptive Cruise Control (ACC) may exhibit a concern where the vehicle may reduce speed when the ACC is engaged while passing a semitrailer truck.
SERVICE PROCEDURE
Replace the Cruise-Control Module (C-CM).
| PART NUMBER | PART NAME |
|---|---|
| BA1Z-9E731-C | Cruise Control Module |
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
