Tire Size And Axle Ratio Calibration Procedure

“This site contains affiliate links for which OEMDTC may be compensated”

2017 F-Super Duty – Tire Size And Axle Ratio Calibration Procedure – Service Tip

2017 F-Super Duty trucks have the ability to adjust the tire size and axle ratio using Integrated Diagnostic Software (IDS) version 103.03 or later.

Only tire size and axle ratio options that are available from the factory can be selected and must be adjusted to match in multiple modules.

For the proper procedure, refer to the ford fleet website at https://www.fleet.ford.com/ and click the link to the truck body builder advisory service (BBAS) at the bottom of the webpage.

Once at BBAS website, click on bulletins, and refer to published qualified vehicle modifier (QVM) bulletin Q-262.

Changes to tire size or axle ratio as a result of customer or upfitter modifications are non-warrantable.

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.