“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10115953
Manufacturer Communication Number: SSM 46703
Summary
Some 2013-2017 Edge/MKX/Escape/MKC/Fusion/MKZ/Flex/MKT/Mondeo/Kuga/EcoSport AWD vehicles where diagnosis leads to a RDU clutch issue, a rear drive unit (RDU) service kit is available. Use the vehicle identification number (VIN) in the parts catalog to look for base part 4A232. If clutch assembly (base 4A232) is not listed in the catalog, this message does not apply. For vehicle repairs refer to updated Workshop Manual (WSM), Section 205-02 on ATC clutch repairs. Use causal part 4A232 or equivalent and applicable labor operations.
35 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FORD | EDGE | 2013-2015 |
FORD | ESCAPE | 2013-2017 |
FORD | FLEX | 2013-2017 |
FORD | FUSION | 2013-2017 |
LINCOLN | MKC | 2015-2017 |
LINCOLN | MKT | 2013-2017 |
LINCOLN | MKX | 2013-2014, 2016-2017 |
LINCOLN | MKZ | 2013-2017 |
SSM 46703
https://www.nhtsa.gov/recalls?nhtsaId=10115953
https://static.nhtsa.gov/odi/tsbs/2017/MC-10115953-9999.pdf
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- ✅ Extended gear and bearing life due minimal deposits.
- ✅ Exceptional thermal stability and resistance to high temperature oxidation.
- ✅ Longer seal life.
- ✅ Reduced maintenance cost and longer equipment life.
- ✅ Effective low temperature lubrication.
- Sinopec GL-5 Heavy Duty Automotive Gear Oil is a range of high-performance gear oils, available in six viscosity grades, formulated with high-quality mineral base oils, and an advanced multifunctional additive system to meet the requirements of API GL-5. Designed for the lubrication of hypoid gear sets in passenger vehicles and commercial vehicles, where they offer excellent extreme pressure (EP) and anti-wear properties.
- Certifications: API GL-5, MIL L-2015D, MAN 343 Type M1, ZF TE_ML 05A, TE-ML 19B, TE-ML 21A
- Pack Size: 5 Gallon Pail (18L Volume)
- WIDEST SPEC RANGE ON THE MARKET - Widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies from VOLVO, Mack, MAN, ZF, EATON, and many others.
- SEVERE SERVICE MAX - Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers a substantial improvement in performance over the previous generation, low cost, gear oils.
- BUILT-IN LIMITED SLIP ADPAK - Does not require "additional" LS additive. It is built into the product and optimized for all limited slip differentials including those with built-in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown which facilitates excellent film strength under high loads, high temp and high shear conditions.
- Formulated specifically for use in motorcycles and ATVs
- Superior protection from wear, pitting and spalling
- Shear stable formula maintains viscosity and ensures smooth shifting
- Surface-active chemistry keeps surfaces free of corrosion, deposits and wear
- Exceeds API GL-5 specifications
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- LONG TERM PROTECTION - Ideal for all engines over 100 hp that require 80w 90w oil - provides exceptional long-term protection against rust and corrosion, extending your engine's lifespan
- SUPERIOR PERFORMANCE - High viscosity synthetic blend 80W-90 gear oil, meets all specs for API GL-5, API MT-1, SAE J2360, and Mack GO-J
- EXTREME PRESSURE ADDITIVES - Special additives ensure great thermal stability and anti-wear protection, even under high temperature conditions
- EASY INSTALLATION - Our gear oil comes with a detailed guide for flushing and filling; STAR BRITE offers a complete line of Lower Unit Quart Pumps, Lube Tubes, and Adaptors for hassle-free oil changes
- VERSATILE APPLICATION - Perfect upgrade for all brands of 80W90 lower unit gear oil and gear lube applications
Last update on 2024-04-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.