Driveline Vibration With 2 Piece Rear Driveshaft – 2009-2014 Ford F-150

2009-2014 F-150 – Driveline Vibration With 2 Piece Rear Driveshaft Some 2009-2014 F-150 vehicles with a 2 piece rear driveshaft can exhibit a driveline vibration concern.   Before attempting to adjust or measure drive-line angles, loosen the 2 driveshaft center support bearing bolts to neutralize the mount and then re-torque to specification.   If this … Read more

Uncommanded Blower Motor Speed Change Or Recirculation Door Movement – 2011-2015 Ford F-150

2011-2015 F-150 Vehicles- Uncommanded Blower Motor Speed Change Or Recirculation Door Movement 2011-2015 F-150 vehicles may experience uncommanded recirculation door movement or have a perceived uncommanded blower motor speed change.   Incoming air may be automatically recirculated in some instances in order to improve vehicle warm-up time in cold conditions or cool-down time in hot … Read more

Safety Belt Retractor Webbing Does Not Extract From Stowed Position – 2015-2016 Ford F-150 & Transit

2017 Ford Mustang

2015-2016 F-150 and Transit – Safety Belt Retractor Webbing Does Not Extract From Stowed Position. Some 2015-2016 F-150 and Transit vehicles may have a concern where the safety belt retractor webbing does not extract from the stowed position.   This may be due to a normal condition which happens when the seatbelt retracts at a … Read more

3.5L GTDI Popping Sound on Cold Startup – 2013-2015 Ford & Lincoln

2013-2015 F-150, Expedition, Navigator, and Transit – 3.5L GTDI popping sound on cold startup 2013-2015 F-150, Expedition, Navigator, and Transit vehicles equipped with a 3.5L GTDI engine can exhibit a popping sound on cold startup that can be isolated to the Charge Air Cooler (CAC) system or air intake area.   The Powertrain Control ModuleRead more

Factory Mode Enable Feature Using IDS or Ford J2534 – 2015 Ford F-150

2015 F-150 Vehicles – Factory Mode Enable Feature Using IDS 2015 F-150 vehicles may be delivered with Factory Mode displayed on the Instrument Cluster.   To correct the concern, release 94.01 and later will provide the ability reconfigure a unit into Transport Mode from Factory Mode. This is done by following the steps using IDSRead more