| “This site contains affiliate links for which OEMDTC may be compensated” |
March 23, 2020 NHTSA CAMPAIGN NUMBER: 20V175000
Wire Harness May Chafe and Damage Circuits
Damage to the fuel pump circuit in the wiring harness could result in an unexpected engine stall. Damage to the ABS wiring can lead to reduction of ABS functionality and a loss of roll stability control (RSC) functionality. These scenarios increase the risk of a crash.
NHTSA Campaign Number: 20V175
Manufacturer Ford Motor Company
Components SERVICE BRAKES, HYDRAULIC, ELECTRICAL SYSTEM, ELECTRONIC STABILITY CONTROL
Potential Number of Units Affected 2,871
Summary
Ford Motor Company (Ford) is recalling certain 2021 E-350 and E-450 vehicles. A wire harness in the rear of the vehicle may contact the vehicle frame, resulting in damage to the circuits that support the fuel pump and the anti-lock braking system (ABS).
Remedy
Ford will notify owners, and dealers will inspect the wire harness for damage. If no damage is found, dealers will apply anti-abrasion tape over the area and ensure clearance to surrounding components. If damage is found, dealers will splice in new wire and apply anti-abrasion tape over the area and ensure clearance to surrounding components. All services will be performed free of charge. The recall began May 18, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 20S13.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
May 1, 2020
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S13
Certain 2021 Model Year Econoline
Wire Harness Frame Rail Chafe
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Econoline | 2021 | Ohio Assembly Plant | May 11, 2019 through January 30, 2020 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS SAFETY RECALL
In some of the affected vehicles, the wiring harness may contact the frame and cause chafing of the wiring harness due to insufficient protection of the wiring harness. The chafing condition could affect wiring associated with the fuel, trailer tow, and anti-lock braking systems. Over time, this could damage the wiring harness bundle potentially resulting in an engine stall or limited anti-lock braking and roll stability control system functionality, increasing the risk of a crash.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to add Rotunda Engineered Wire Harness Tape to the affected area of the wire harness. This service must be performed on all affected vehicles at no charge to the vehicle owner.
OWNER NOTIFICATION AND MAILING SCHEDULE
Owner letters are expected to be mailed the week of May 18, 2020. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
ATTACHMENTS
Attachment I: Administrative Information
Attachment II: Labor Allowances and Parts Ordering Information
Attachment III: Technical Information
Owner Notification Letters
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
ATTACHMENT I
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S13
Certain 2021 Model Year Econoline
Wire Harness Frame Rail Chafe
OASIS ACTIVATION
OASIS was activated on March 24, 2020.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on May 1, 2020. Owner names and addresses will be available on June 1, 2020.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall.
SOLD VEHICLES
- Ford has not issued instructions to stop selling/delivering or driving used vehicles under this safety recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Correct all affected units in your new vehicle inventory before delivery.
- Use OASIS to identify any affected vehicles in your used vehicle inventory.
DEALER-OPERATED RENTAL VEHICLES
The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
- For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances for FSA’s / Related Damage.
- For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked.
- Ford vehicles – 3 years or 36,000 miles o For claims exceeding the pre-approved amount, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
- Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
- When entering claims, select claim type 31: Field Service Action. The FSA number 20S13 is the sub code.
- For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
- Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
- Provision for locally obtained Rotunda Engineered Wire Harness Tape (NAI837X): Submit on the same line as the repair.
- Program Code: 20S13 – Expense: OTHER
- Expense: Claim up to $2.00
ATTACHMENT II
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S13
Certain 2021 Model Year Econoline
Wire Harness Frame Rail Chafe
LABOR ALLOWANCES
| Description | Labor Operation | Labor Time |
| Inspect for damaged wire. If wire is not damaged apply Rotunda Engineered Wire Harness Tape | 20S13B | 0.3 Hours |
| Repair Damaged Circuits using workshop manual.
(Repair up to two wires) |
MT20S13 | Up to 0.2 Hours |
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.
ATTACHMENT III
CERTAIN 2021 MODEL YEAR E-SERIES VEHICLES — WIRE HARNESS CHAFE SERVICE PROCEDURE
1. Locate the elbow at the take out from the frame harness to the fuel pump bundle. See Figure 1.
FIGURE 1
2. Inspect the harness in the specified location. Are any of the wires in the wire harness bundle damaged?
Yes – Please refer to the Wiring Diagrams Cell 005 for Connector Repair Procedures and repair any damaged circuits as necessary. After repair is complete, proceed to Step 3.
No – Proceed to Step 3.
3. Add Rotunda Engineered Wire Harness Tape (NAI837X) to the elbow. Begin wrapping the tape on the convolute, one inch from the end. Continue wrapping the tape over the harness elbow using a 50% tape overlap until reaching one inch past the end of the right-angle harness routing elbow. See Figure 2.
FIGURE 2
March 24, 2020
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
– Advance Notice – Safety Recall 20S13
Certain 2021 Model Year Econoline
Wire Harness Frame Rail Chafe
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Econoline | 2021 | Ohio Assembly Plant | May 11, 2019 through January 30, 2020 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS SAFETY RECALL
In some of the affected vehicles, the wiring harness may contact the frame and cause chafing of the wiring harness due to insufficient protection of the wiring harness. The chafing condition could affect wiring associated with the fuel, trailer tow, and anti-lock braking systems.
SERVICE ACTION
DO NOT DEMONSTRATE OR DELIVER any new in-stock vehicles involved in this safety recall. A complete Dealer Bulletin will be provided to dealers the week of April 20, 2020 when it is anticipated that parts ordering information and repair instructions will be available to support this safety recall.
IMPORTANT: Dealers should open a Repair Order (RO) only when a full dealer bulletin is published. Opening an RO against an Awareness or Advance Notice will result in warranty rejections against a recall.
CUSTOMER NOTIFICATION
Owners of record will be notified via first-class mail after repair instructions and parts ordering information have been provided to dealers.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory prior to delivery.
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
May 2020
* * * IMPORTANT SAFETY RECALL * * *
Safety Recall Notice 20S13 NHTSA Recall 20V-175
Your Vehicle Identification Number (VIN):
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above.
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support.
| What is the issue? | On your vehicle, there may be insufficient clearance between a wiring harness bundle and the vehicle’s frame. |
| What is the risk? | Insufficient clearance could lead to a touch condition between the wiring harness bundle and the vehicle’s frame. Over time, this could damage the wiring harness bundle potentially resulting in an engine stall or limited anti-lock braking and roll stability control system functionality, increasing the risk of a crash. |
| What will Ford and your dealer do? | Ford Motor Company has authorized your dealer to apply abrasion tape to protect the wire harness bundle free of charge (parts and labor). |
| How long will it take? | The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. |
| What should you do? | Please call your dealer without delay and request a service date for Recall 20S13. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter.
Ford has not issued instructions to stop driving your vehicle under this safety recall. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable. You can continue to safely drive your vehicle. If you do not already have a servicing dealer, you can access www.Fordowner.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have this safety recall completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Ford Motor Company can deny coverage for any vehicle damage that may result from the failure to have this recall performed on a timely basis. Therefore, please have this recall performed as soon as possible. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition, there are other features such as reserving and paying for parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. |
| COVID-19
(CORONAVIRUS) |
Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. |
| What if you no longer own this vehicle? | If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner.
You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. |
| Can we assist you further? | If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.Fordowner.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). MOTORHOME OWNERS: If you have questions or concerns, please contact our Motorhome Customer Assistance Center toll free at 1-866-906-9811. Representatives are available 24 hours a day. If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov. Reference NHTSA Safety Recall 20V-175. |
Thank you for your attention to this important matter.
Ford Customer Service Division
Mayo de 2020
SAMPLE CITY, MI 12345-6789
* * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * *
Aviso de campaña de seguridad 20S13 / Campaña 20V-175 de la NHTSA
Número de identificación del vehículo (VIN):
Este aviso se le envía de acuerdo con la Ley Nacional de Seguridad y Tránsito de Vehículos de los EE. UU.
Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba.
Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel.
| ¿Cuál es el problema? | En su vehículo, podría existir un espacio insuficiente entre el mazo de cables y el bastidor del vehículo. |
| ¿Qué riesgo existe? | Un espacio insuficiente podría traducirse en una condición de contacto entre el mazo de cables y el bastidor del vehículo. Con el tiempo, esto podría dañar el mazo de cables y posiblemente causar un paro del motor o una funcionalidad limitada del sistema de frenos antibloqueo y del sistema de control de estabilidad antivuelco, lo cual aumenta el riesgo de sufrir un choque. |
| ¿Qué medidas adoptarán Ford y su distribuidor? | Ford Motor Company ha autorizado a su distribuidor a aplicar una cinta resistente a la abrasión para proteger el mazo de cables sin costo alguno (piezas y mano de obra). |
| ¿Cuánto tiempo tomará? | El tiempo necesario para esta reparación será menos de medio día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. |
| ¿Qué debe hacer? | Llame de inmediato al distribuidor y solicite una cita de servicio para realizar la campaña 20S13. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta.
Para esta campaña de seguridad, Ford no ha emitido instrucciones de no manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema lo más pronto posible. Puede continuar manejando su vehículo con seguridad. Si aún no tiene un distribuidor para realizar el servicio, puede acceder a www.Fordowner.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar esta campaña de seguridad en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Ford Motor Company puede negar la cobertura en caso de que el vehículo hubiese sufrido daños por no haber realizado la campaña de manera oportuna. Por lo tanto, le solicitamos que realice esta campaña lo antes posible. Tenga presente que: la ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones como reserva y pago de estacionamientos en ciertos lugares, además de control de ciertas funciones en el vehículo (bloqueo y desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. |
| COVID-19
(CORONAVIRUS) |
Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio fundamental. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando duro para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. |
| ¿Qué pasa si usted ya no es el propietario del vehículo? | Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta.
Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. |
| ¿Podemos hacer algo más por usted? | Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda.
PROPIETARIOS MINORISTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE FLOTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE CASAS RODANTES: si tiene dudas o preguntas, comuníquese con nuestro Centro de Asistencia a Clientes de Casas Rodantes sin cargo al 1-866-906-9811. Los representantes se encuentran disponibles las 24 horas del día. Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite www.safercar.gov. Mencione la Campaña de seguridad 20V-175 de la NHTSA. |
Gracias por su atención en este asunto sumamente importante.
Ford, División de Servicio al Cliente
August, 2020
* * * IMPORTANT SAFETY RECALL REMINDER * * *
According to our records, your 2021 E-350 Econoline has not had necessary safety recall repairs made. We urge you to have the free repair performed at your local dealership as soon as possible.
| Recall Number and Description: | 20S13 – WIRE HARNESS FRAME RAIL |
| What is the issue? | On your vehicle, there may be insufficient clearance between a wiring harness bundle and the vehicle’s frame. Insufficient clearance could lead to a touch condition between the wiring harness bundle and the vehicle’s frame. Over time, this could damage the wiring harness bundle potentially resulting in an engine stall or limited anti-lock braking and roll stability control system functionality, increasing the risk of a crash. |
If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332.
If you wish to contact us through the Internet, our address is: www.Fordowner.com. Thank you for your attention to this very important matter.
Augusto de, 2020
* * * RECORDATORIO IMPORTANTE PROGRAMA DE SEGURIDAD * * *
Seg nuestros registros, no se realizaron en sur 2021 E-350 Econoline las reparaciones necesarias correspondientes a la campaña de seguridad. Le solicitamos que realice esta reparación gratuita en su distribuidor local lo antes posible.
| Número y descripción de la campaña: | 20S13 – ARRANQUE DE ALAMBRE |
| ¿Cuál es el problema? | En su vehículo, podría existir un espacio insuficiente entre el mazo de cables y el bastidor del vehículo. Un espacio insuficiente podría traducirse en una condición de contacto entre el mazo de cables y el bastidor del vehículo. Con el tiempo, esto podría dañar el mazo de cables y posiblemente causar un paro del motor o una funcionalidad limitada del sistema de frenos antibloqueo y del sistema de control de estabilidad antivuelco, lo cual aumenta el riesgo de sufrir un choque. |
Si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332.
Si desea ponerse en contacto con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Gracias por su atenciic en este asunto sumamente importante.
FORD MOTOR COMPANY ISSUES TWO SAFETY RECALLS FOR NORTH AMERICA AND ONE SAFETY RECALL FOR CANADA ONLY
MAR 25, 2020 | DEARBORN, MICH.
DEARBORN, Mich., March 25, 2020 – Ford Motor Company is issuing two safety recalls for North America and one for Canada only. Details are as follows:
Safety recall for select 2014-15 Ford Fiesta, 2014-16 Ford Fusion and 2014-16 Lincoln MKZ vehicles
Ford Motor Company is issuing a safety recall for select 2014-15 Ford Fiesta, 2014-16 Ford Fusion and 2014-16 Lincoln MKZ vehicles. In affected vehicles, the latch pawl spring-tab design is susceptible to cracking and failure in areas with high ambient temperatures. A door latch with a fractured pawl spring tab typically results in a “door will not close” condition. If the customer is able to latch the door after repeated attempts, there is a potential the door may unlatch while driving, increasing the risk of injury.
Ford is not aware of any reports of accident or injury related to this condition. This action affects 248,912 vehicles in the United States and federal territories, 19,431 in Mexico and four in Canada.
Affected vehicles include:
- 2014-15 Ford Fiesta vehicles built at Cuautitlán Stamping and Assembly Plant, Nov. 1, 2013, to Dec. 4, 2014
- 2014-16 Ford Fusion vehicles built at Flat Rock Assembly Plant and Hermosillo Assembly Plant, Nov. 1, 2013, to April 27, 2015
- 2014-16 Lincoln MKZ vehicles built at Hermosillo Assembly Plant, Nov. 1, 2013, to April 27, 2015
Affected vehicles are or have been previously registered in Alabama, Arizona, Arkansas, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, Nevada, Oklahoma, Oregon, South Carolina, Texas, Utah, Washington and federal territories.
Dealers will remove and replace the side door latches. The Ford reference number for this recall is 20S15.
Safety recall for select 2021 Ford E-Series vehicles
Ford Motor Company is issuing a safety recall for select 2021 Ford E-Series stripped chassis and cutaway vehicles. Affected vehicles may have frame-mounted wire harnesses that could, over time, chafe on the frame and damage the wire harness and the circuits within it. The chafing condition could affect wiring associated with the fuel, trailer tow and antilock braking systems. Damage to the fuel pump circuit could result in an unexpected engine stall while driving. If an engine stall occurs while driving without a warning or the ability to restart, it can increase the risk of a crash.
Ford is not aware of any reports of accident, injury or fire related to this condition. This action affects 2,871 vehicles in the United States and 760 in Canada. Affected 2021 Ford E-Series vehicles were built at Ohio Assembly Plant, May 11, 2019, to Jan. 30, 2020.
Dealers will inspect the wire harness for damage. If there is no damage, the technician will apply anti-abrasion tape over the area and ensure clearance to surrounding components. If the wire harness is damaged, technicians will follow the standard workshop manual repair procedure to slice in new wire, apply anti-abrasion tape over the area and ensure clearance to surrounding components. The Ford reference number for this recall is 20S13.
Safety recall in Canada only for select 2006-10 Ford Fusion, 2006-10 Mercury Milan and 2006-10 Lincoln MKZ vehicles
Ford Motor Company is issuing a safety recall for select 2006-10 Ford Fusion, 2006-10 Mercury Milan and 2006-10 Lincoln MKZ vehicles. In some affected vehicles, a normally closed valve inside the hydraulic control unit may stick open, which could result in extended brake pedal travel, potentially increasing the risk of a crash.
Ford is aware of one accident report related to this condition. This action affects 54,292 vehicles in Canada. Affected vehicles were built at Hermosillo Assembly Plant, Feb. 22, 2006, to July 15, 2009.
Dealers will inspect the hydraulic control unit for signs of stuck or slow-responding valves and replace the unit if necessary. The system will be pressure-flushed with DOT 4 brake fluid and the DOT 3 reservoir cap will be replaced with a new DOT 4 cap. The Ford reference number for this recall is 20S14.
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | E-350 | 2021 |
| FORD | E-450 | 2021 |
11 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-20V175-1708.pdf 92.365KB
Loading...
Reload document 
Open in new tab
Manufacturer Notices(to Dealers,etc) – Dealer Notification re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 20S13 Certain 2021 Model Year Econoline Wire Harness Frame Rail Chafe
Loading...
Defect Notice 573 Report
RCLRPT-20V175-1534.PDF 216.692KB
Loading...
Recall Acknowledgement
RCAK-20V175-6333.pdf 245.093KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re Wire Harness Frame Rail Chafe
RCMN-20V175-5366.pdf 110.969KB
Loading...
Miscellaneous Document – Media Announcement re FORD MOTOR COMPANY ISSUES TWO SAFETY RECALLS FOR NORTH AMERICA AND ONE SAFETY RECALL FOR CANADA ONLY
RMISC-20V175-2276.pdf 312.091KB
Loading...
Recall 573 Report – change of ONL date
RCLRPT-20V175-8860.PDF 216.694KB
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V175-3902.PDF 211.329KB
Loading...
Recall Quarterly Report #1, 2020-2
RCLQRT-20V175-4189.PDF 211.14KB
Loading...
ISSUED Renotification Notice
RCRN-20V175-8964.pdf 332.657KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V175-6547.PDF 211.247KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V175&docType=RCL
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- -The most advanced high heat harness tape available
- -Superior abrasion & heat resistant
- -Resist chemical and fluid from engine compartment
- -Solvent-free advanced acrylic adhesive & flame-retardant
- -1 roll of Tesa 51036 (each roll is 19mm wide X 25meters long)
- -The most advanced high heat harness tape available
- -Superior abrasion & heat resistant
- -Resist chemical and fluid from engine compartment
- -Solvent-free advanced acrylic adhesive & flame-retardant
- -5 rolls of Tesa 51036 (each roll is 19mm wide X 25meters long)
- Widely application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
- Easy to tear. Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
- Professional cloth tape material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40°F ~ 221°F ), well seal and excellent flexibility.
- Excellent performance: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
- Specification: A set of 5 rolls wire harness cloth tap. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
- STRONG CLOTH ADHESIVE - Made of PET Cloth base, the friction harness tape has a strong anti-peeling performance and wont tear during use. Provides good flexibility to enhance comfort when bonding cables together. The adhesive of this tape holds up over time and offers a firm grip. Does not contain hazardous substances.
- WIRE LOOMS IN AUTO - WOD friction tape is widely used in the automotive industry. It helps to hold the cables and wires together while providing protection against moisture, vibration, and other environmental factors that can cause damage to the wires over time.
- HIGH TEMP AND NOISE REDUCTION - WOD black cloth tape is preferred for electricians, handymen, mechanics, and HVAC due to its temperature resistance capability. It can be applied at -40 ℉ environments and perform at up to 221 ℉, ideal for engine parts exposed to heat or cold, such as batteries, wires, air conditioning, or car audio installation.
- EASY TO TEAR BY HAND - The Friction Tape is HAND-TEARABLE and made of cloth fabric that ensures the material is ripped with your fingers and enhances the application process, leaving no residue behind if removed. It has a low skill and mastery requirement, so everyone can use it, from beginners to professionals!
- WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service.
- The most advanced high heat harness tape available
- Rated to 150C, Superior abrasion resistance
- Resists chemicals and fluids
- AAA adhesive, self extinguishing
- Wire Harness Cloth Tape Application: Automotive wire loom tape is widely used in the area near the engine, battery or on normal wire harness and also suitable for the use of wire harness in automobile interior noise reduction part, such as instrument panel harness. Wrap any wires that need to be repaired
- Temperature Resistance: Electrical wiring harness cloth tape made of high-quality polyester non-woven fabric and strong acrylic pressure sensitive adhesive, with high adhesive Force, abrasion resistance and high-temperature resistance (-40℉- 225℉)
- Easy to Tear: Oyviny automotive cloth tape is easy to tear and convenient to use, just wrap the harness cloth tape around the wiring harness and gently tear it apart, No tools required! You could tear the tape at any length according to your need
- Good Performance: Automotive wire loom harness cloth tape is wear-resistant and with strong anti-aging, which can be applied for a long time. It is also suitable for automotive circuit and engine maintenance to achieve the effect of insulation protection
- Harness Cloth Tape Size: Package comes with 5 rolls 25mm x 15m electrical wire harness tape. Each roll radio wiring harness cloth tape is 1 inch width and 50 feet length. The size and length is suitable for your daily use
- Enough to Use: you will get 2 rolls of wire harness tapes in the package, measuring approx. 2 inches x 49.2 ft/ 50 mm x 15 m for each; The proper size and sufficient length is suitable for your different daily needs in many use scenarios
- Safe Material: the wire harness tape is made of polyester non woven fabric material, quality pressure sensitive adhesive, high temperature and wear resistance, which can be applied for a long time
- Nice Performance: the adhesive fabric tape has nice noise reduction and heat insulation performance, very suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Easy to Use: the wire loom tape is simple and convenient to use, just wrap the tape on the wire and tear it gently, and you can decide the length of the tape according to your own needs
- Scope of Usage: the cloth electrical tape is suitable for automobile interior noise reduction part, such as instrument panel harness and main harness wound, and can also be applied for wire joint and wire fixing
- OEM-GRADE AUTOMOTIVE WIRE LOOM TAPE that’s specifically designed for high temp wirings. Our wiring harness tape prevents oil build-up, abrasion, and contains 10 rolls at 50 Feet, for a total of 500 feet.
- HEAVY-DUTY. With a tensile strength of 160lb/in, this cloth tape automotive withstands daily wear and tear, extreme heat, and humidity for up to 12 years without weakening or unraveling.
- RESIDUE-FREE. With a silicone adhesive, our fabric electrical tape will not leave a messy goo upon removal. This heat resistant wire loom tape prevents coil rattling, making it an essential high temp automotive tape for those who want silent and PRO-GRADE cable wrap results.
- EXCELLENT THERMALS. Operating at -40°F to 257°F, this high temp electrical tape can also be used under the hood, PC, or on high heat electrical wire harness wrap.
- INSTALLS CLEANLY. Made from fabric-polycarbonate composite, this automotive electrical tape can torn with bare hands, while being stretchy for accessing hard-to-reach areas.
- Harness Cloth Tape Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard.
- Harness Cloth Tape Material: These wiring harness tape are made of high quality cotton flannel and strong adhesive glue.
- Harness Cloth Tape Features: 1High Adhesive Force 2 Noise Resistance Well 3 Strong Abrasion Resistance 4 Hand Tearable 5 Strong Chemical Resistance.
- Harness Cloth Tape Size: Length 15 m, Width 15 mm.
- Car harness cloth tape is very convenient to use; just wrap the tape around the wire and gently tear it apart. No scissors or other tools are needed. The length of the tape can be determined according to your needs.
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.