| “This site contains affiliate links for which OEMDTC may be compensated” |
February 21, 2020 NHTSA CAMPAIGN NUMBER: 20V098000
Damage To Block Heater Cable May Cause Fire
A damaged cable could cause a resistive short, increasing the risk of overheated or melted wiring, increasing the risk of a fire.
NHTSA Campaign Number: 20V098
Manufacturer Ford Motor Company
Components EQUIPMENT, ENGINE
Potential Number of Units Affected 13,854
Summary
Ford Motor Company (Ford) is recalling certain 2015-2016 F-150 pick-up trucks equipped with 3.5L GTDI engines and block immersion heaters that were potentially relocated from their originally installed location. The incorrect location could put the heater too close to hot engine components, possibly resulting in a damaged cable.
Remedy
Ford will notify owners, and dealers will inspect the block heater’s location and its cable, replacing components as necessary, free of charge. If the replacement parts are not available, dealers will disable the existing block heater cable from being used until parts become available. The recall began April 9, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 20S08.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
June 9, 2020
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: Safety Recall 20S08 –Supplement #2
Certain 2015 – 2016 Model Year F-150 Vehicles Equipped with 3.5L GTDI Engines
and Engine Block Heaters
Engine Block Heater Cable Inspection
REF: Application Performance Upgrade 19G01 – Supplement #5
Certain 2015 – 2019 Model Year F-150 and 2017 – 2019 Model Year F-Super Duty
Vehicles Equipped with Engine Block Heaters
Engine Block Heater Cable Replacement
REF: Technical Service Bulletin 16-0003
2015-2016 Model Year F-150
3.5L GTDI – No Start After Using Block Heater – Temperatures Below -15 °C (0 °F)
REF: Technical Service Bulletin 19-2121
3.3L/3.5L Duratec/3.5L EcoBoost/5.0L – With Block Heater – Lack Of
Heat When Operating In Temperatures Below -20°C (4°F) – Built On Or Before 1-Jan-2019
REF: Technical Service Bulletin 19-2019
3.3L/3.5L Duratec/3.5L Ecoboost/5.0L – With Block Heater – Lack Of
Heat When Operating In Temperatures Below -20°C (4°F)
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| F-150 | 2015-2016 | Dearborn | July 31, 2014 through September 27, 2016 |
| F-150 | 2015-2016 | Kansas City | February 10, 2015 through October 15, 2016 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
All vehicles in this program have had 19G01 completed.
New! REASON FOR THIS SUPPLEMENT
- All Parts may now be obtained through normal order processing channels.
- Labor Operation Code 20S08DD to disable the engine block cable has been deleted because parts are now available.
REASON FOR THIS SAFETY RECALL
The 2015-16 MY F-150 3.5L GTDI engines were equipped with an engine block heater element located in the thermostat housing. Some customers reported poor engine cold-start concerns with the block heater in this location. Technical service bulletin (TSB) 16-0003 introduced a repair option to relocate the heater element to an alternate port in the engine block. This repair replaced the block heater cable with a shorter cable with heat protective tape and a heat shield, mainly to protect the cable from the heat from the turbocharger in this alternate location.
The released cables in 19G01 for 2015-2016 with 3.5l GTDI engine did not account for the different engine block mounting location and they were approximately 0.5m too long. Also, these cables did not contain the heat protection which was present on the TSB 16-0003 cable. A second TSB, TSB 19-2019 (superseded by 19-2121), was issued that relocated the engine block heater to an alternate location. It also included a replacement block heater cable that did not include heat protection, similar to the cable used in TSB 16-0003. The absence of heat protection and the excess cable length in proximity to other engine components could result in cable damage. A damaged engine block heater cable can increase the risk of fire when the vehicle is parked, and the block heater cable is plugged into an electrical outlet.
SERVICE ACTION
Dealers are to inspect the left hand (LH) side of the block, behind the LH turbocharger assembly for immersion block heater element and cable:
- PASS – If the vehicle does not have an immersion block heater element installed on the left hand (LH) side of the block, behind the LH turbocharger assembly, no repair is necessary.
- DOES NOT PASS:
- Rectangular connector: If the block heater cable and heater element have a rectangular connector, both the heater element and block heater cable will be replaced.
- Round connector: If the block heater cable and heater element have a round connector, only the block heater cable will be replaced. This service must be performed on all affected vehicles at no charge to the vehicle owner.
New! OWNER NOTIFICATION MAILING SCHEDULE
Parts are now available to repair to service all the affected vehicles. Owner letters are expected to be mailed the week of June 22, 2020. Dealers should inspect and repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
New! ATTACHMENTS
Attachment I: Administrative Information
Attachment II: Labor Allowances and Parts Ordering Information
Attachment III: Technical Information
Owner Notification Letters
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
ATTACHMENT I
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 20S08–Supplement #2
Certain 2015 – 2016 Model Year F-150 Vehicles
Equipped with 3.5L GTDI Engines and Engine Block Heaters
Engine Block Heater Cable Inspection
OASIS ACTIVATION
OASIS was activated on February 24, 2020.
FSA VIN LISTS ACTIVATION
FSA VIN Lists were available through https://web.fsavinlists.dealerconnection.com on February 24, 2020. Owner names and addresses were available on April 21, 2020.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall.
SOLD VEHICLES
- Ford has not issued instructions to stop selling/delivering or driving used vehicles under this safety recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Correct all affected units in your new vehicle inventory before delivery.
- Use OASIS to identify any affected vehicles in your used vehicle inventory.
DEALER-OPERATED RENTAL VEHICLES
The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
Ford has not issued instructions to stop driving used vehicles under this safety recall. Owners can continue to safely drive their vehicles until this safety recall has been completed.
Part shortages are not considered extenuating circumstances and do not qualify for rental vehicles with this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
- For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances for FSA’s / Related Damage.
- For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked.
- Ford vehicles – 3 years or 36,000 miles
- For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
- Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
- When entering claims, select claim type 31: Field Service Action. The FSA number (20S08) is the sub code.
- For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
- Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
- Provision for locally obtained supplies or misc. expense: Motorcraft Thread lock TA-26 (for vehicles equipped with adaptive cruise control and approved by SSSC).
- Program Code: 20S08
- Expense: OTHER
- Amount: Actual cost up to $2.00
- Estimated five vehicles per tube, twelve tubes per box.
ATTACHMENT II
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 20S08–Supplement #2
Certain 2015 – 2016 Model Year F-150 Vehicles
Equipped with 3.5L GTDI Engines and Engine Block Heaters
LABOR ALLOWANCES
PASS
Inspect left hand (LH) side of the block, behind the LH turbocharger assembly for immersion block heater element:
| Description | Labor Operation | Labor Time |
| No immersion block heater element installed on the left hand (LH) side of the block, behind the LH turbocharger assembly
No Repair Necessary |
20S08A | 0.3 Hours |
DOES NOT PASS*
Inspect left hand (LH) side of the block, behind the LH turbocharger assembly for immersion block heater element;
| Description | Labor Operation | Labor Time |
RECTANGULAR CONNECTOR:
Replace heater element and block heater cable and properly dispose of old block heater cable. |
20S08B
(may claim 3 parts: cable, element, antifreeze) |
2.2 Hours |
ROUND CONNECTOR:
(DOES NOT INCLUDE REPLACING HEATER ELEMENT) |
20S08C
(may claim cable only) |
1.2 Hours |
*For labor operation codes 20S08B and 20S08C only – if vehicle is Lariat, King Ranch, Platinum Series, or Supercrew Limited Series equipped with adaptive cruise control, when you submit a VIN-specific Part Order to SSSC, you may also request the following:
- additional labor time for the cruise control module (CCM) if equipped
- TA-26 threadlock (may also obtain locally)
- SSSC will confirm VIN is equipped with Adaptive Cruise Control with one of the following packages:
- 50A Adaptive Cruise Control (option)
- 68T Technology Package (option)
- 502A Lariat (option)
- 66A Lariat Series (option)
- 601A King Ranch (option)
- 701A Platinum Luxury (standard)
New! PARTS REQUIREMENTS / ORDERING INFORMATION
All Parts may now be obtained through normal order processing channels.
| Description | Order Quantity | Claim Quantity | Part Number |
| Block Heater Cable for 2015-2016MY F-150 3.5L GTDI Engine, with an immersion block heater. | 1 | 1 | GL3Z-6B018-B |
| Block Heater Element – Round
(can only be claimed with 20S08B labor operation) |
1 | 1 | YF1Z-6A051-AA  |
| Anti-freeze 1 Gallon Bottles
(can only be claimed with 20S08B labor operation) |
1 | 1 | VC-3-B |
| Threadlock
(can only be claimed with adaptive cruise control)
|
TA-26 |
||
| or equivalent | |||
Order your parts through normal order processing channels. To guarantee the shortest delivery time, an emergency order for parts must be placed.
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS RETENTION AND RETURN POLICIES.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
ATTACHMENT III
CERTAIN 2015-2016 MODEL YEAR F-150 VEHICLES EQUIPPED WITH A 3.5L GTDI ENGINES — BLOCK HEATER CABLE INSPECTION
NOTE: For 2015-2016 model year F-150 vehicles equipped with 3.5L GTDI engines, engine block heaters were installed in two different locations:
- Immersion block heater element located on the left hand (LH) side of the block, behind the LH turbocharger assembly.
- Thermostat mounted block heater element (majority of vehicles will have this option).
Table of Contents
| – Inspection Procedure | Pages 2-3 |
| – Service Procedure | Pages 4-14 |
| i. Removal Procedure | Pages 4-10 |
| ii. Installation Procedure | Pages 11-14 |
INSPECTION PROCEDURE
All Vehicles
1. Raise the vehicle on a hoist. Please follow the Workshop Manual (WSM) procedures in Section 100-02.
2. Inspect the left hand (LH) side of the block, behind the LH turbocharger assembly, for the presence of an immersion block heater element. Is the vehicle equipped with an immersion style block heater? See Figure 1 and the NOTE below.
Yes – Proceed to Step 3.
No – Inspection Complete.
NOTE: No repair is necessary if the vehcle is equipped with a Thermostat Block Heater.
3. Does the immersion block heater cable have a rectangular or a round immersion element connector end? See Figures 2 and 3. Follow the repair procedure for the vehicles cable end shape.
For Rectangular End – Install a new immersion block heater element and block heater cable. Please follow the WSM procedures in Section 303-03C (immersion block heater element) and the Service Procedure on Page 4 (immersion block heater cable) of this campaign.
For Round End – Install a new immersion block heater cable. Please follow the Service Procedure on Page 4 of this campaign.
SERVICE PROCEDURE
WARNING: DO NOT INSTALL BLOCK HEATER CABLES THAT CONTAIN AN IN-LINE CONNECTOR FROM FSA PROGRAM 18S45.
REMOVAL PROCEDURE
Vehicles Equipped With Adaptive Cruise Control
NOTE: Do Not remove the CCM Bracket or the Front Bumper in the following Step.
1. Remove the Cruise Control Module (CCM). Please follow the Workshop Manual (WSM) procedures in Section 419-03.
NOTE: Remove any clips that remain in the bumper and reinstall them onto the front bumper trim panel.
Vehicles Not Equipped With Adaptive Cruise Control
2. Release the clips, detach the 110V plug end retainer and remove the front bumper trim panel. Remove any clips that remain in the bumper and reinstall them onto the front bumper trim panel. See Figure 4.
All Vehicles
3. Remove the left hand (LH) front fender splash shield. Please follow Workshop Manual (WSM) procedures in Section 501-02.
4. Remove the engine rear undershield. Please follow the WSM procedures in Section 501-02.
5. Disconnect the block heater electrical connector. Figure 5.
- When installing the new block heater electrical connector, the heat shield will need to be positioned aside and positioned back over the electrical connector as needed to connect the block heater.
6. Release the block heater cable, small C-clip, from the generator wiring harness. See Figure 6.
7. Release the large C-clip from the lower oil cooler coolant hose. See Figure 7.
8. Release the block heater cable to frame retainer (a). Then, route the block heater cable over the LH motor mount toward the front of the vehicle (b). See Figure 8.
9. If equipped, remove the heat shield by removing the reflective heat tape holding the heat shield to the block heater cable. See Figure 15.
10. Remove and discard the small C-clip end by separating it from the tie strap base as shown in Figure 9.
11. Remove and discard the large C-clip, that was attached to the lower oil cooler coolant hose, from block heater cable by removing the tape holding it to the block heater cable. See Figure 10.
12. Detach the two (2) block heater cable retaining clips (a) from the left front frame rail and the one (1) cable retaining clip (b) from the bumper support bracket. See Figure 11.
13. From the left front side of the vehicle, position the block heater cable out of the grill shutter air diverter slot and detach the retainer holding the block heater cable to bumper. See Figure 12.
14. From the front of the vehicle, guide the block heater cable out through the front of the bumper. Remove and discard the original block heater cable. See Figure 13.
INSTALLATION PROCEDURE
NOTICE: Make sure the block heater cable is routed and secured away from rotating or hot components, or the cable can be damaged.
15. Before installing, lay out the new block heater cable. Mark the location of the large C-clip on the block heater cable as shown in Figure 14. Then, remove the tape holding the large C-clip to the block heater cable and set the clip to the side to be attach back to the block heater cable later in this procedure. See Figure 14.
16. Carefully remove the reflective heat tape holding the heat shield to the block heater cable. Then, remove the heat shield and reflective heat tape and set aside to be reattached back to the block heater cable later in this procedure. See Figure 15.
17. Remove the small cable C-clip by seperating the clip from the zip tie base. Set aside the clip to be reinstalled later in this procedure. See Figure 16.
18. Route the block heater cable, starting with the block heater element (orange) connector, through the left front side of the bumper. See Figure 17.
19. Continue to route the block heater cable until at least half of the cable is routed through the front bumper. See Figure 13.
20. Attach the two (2) block heater cable retaining clips (a) to the left front frame rail and one (1) cable retaining clip (b) to the bumper support bracket. See Figure 11.
21. Using electrical tape, retape the large C-clip to the block heater cable where it was previously marked for removal. See Figure 14.
22. Secure the small C-clip back into the zip tie base on the block heater cable. See Figure 16.
23. Using the original reflective heat tape, install and retape the heat shield around the block heater element connector end. See Figure 15.
24. Route the block heater cable toward the inboard side of the left front frame rail and over the LH engine mount toward the block heater element. Then, attach the block heater cable to frame retainer. See Figure 8.
25. Attach the large C-clip to the lower oil cooler coolant hose. See Figure 7.
26. Attach the small C-clip to the generator wiring harness. See Figure 6.
27. Connect the block heater electrical connector and position the heat shield back over the block heater connector. See Figure 5.
28. From the left front side of the vehicle, attach the retainer holding the block heater cable to bumper as shown in Figure 12.
29. Route the block heater cable through the upper slot in the grill shutter air diverter as shown in Figure 18.
30. Install the engine rear undershield. Please follow the WSM procedures in Section 501-02.
31. Install the LH front fender splash shield. Please follow the WSM procedures in Section 501-02.
Vehicles Not Equipped With Adaptive Cruise Control
32. Attach the block heater cables 110V plug end retainer and install the front bumper trim panel. See Figure 5.
Vehicles Equipped With Adaptive Cruise Control
33. Install the CCM. Please follow the WSM procedures in Section 419-03.
ATTACHMENT IV
Engine Block Heater Cord Replacement
Customer Information Sheet – DO NOT USE – RISK OF FIRE
WARNING: DO NOT USE THE ENGINE BLOCK HEATER IN YOUR VEHICLE DUE TO THE RISK OF AN ENGINE COMPARTMENT FIRE AND/OR PROPERTY DAMAGE.
Ford Motor Company is recalling certain 2015 – 2016 Model Year F-150 Vehicles Equipped with 3.5L GTDI Engines and Engine Block Heaters. The engine block heater cord will be disabled under Safety Recall 20S08 if replacement parts are not available.
When replacement parts become available, Ford Motor Company will notify you via mail to schedule a service appointment with your dealer to replace your engine block heater cord assembly.
Again, we apologize for the inconvenience this situation causes and assure you that we are doing everything possible to expedite resolution.
Sincerely,
Ford Motor Company
Ford Customer Service Division
April 2020
JOHN A. SAMPLE
123 SAMPLE ST
SAMPLE CITY, MI 12345-6789
* * * IMPORTANT SAFETY RECALL * * *
Safety Recall Notice 20S08 / NHTSA Recall 20V-098
Your Vehicle Identification Number (VIN):
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above.
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support.
| What is the issue? | Our records indicate that you previously had application performance upgrade 19G01 and one of the following repairs performed to update the engine block heater cable on your vehicle:
However, the correct cable was not installed during your vehicle repair. Ford Motor Company wants to ensure the cable in your vehicle is updated to the correct level. The absence of heat protection and the excess cable length in proximity to other engine components could result in cable damage. |
| What is the risk? | A damaged engine block heater cable may increase the risk of fire when the vehicle is parked and the block heater cable is plugged into an electrical outlet. |
| What will Ford and dealer do? | Ford Motor Company has authorized your dealer to inspect the block heater your cable free of charge (parts and labor). After the inspection, if the block heater cable requires replacement, and parts are not available to repair your vehicle, your dealer will disable the existing block heater cable so that it cannot be used.
Ford Motor Company will send a letter to inform you when parts are available. You may contact your dealer to schedule a final repair at that time. Parts are anticipated to be available second quarter 2020. |
| How long will it take? | The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. In addition, your vehicle will require an inspection to determine if parts need to be ordered. |
| What should you do? |
If you do not already have a servicing dealer, you can access www.Fordowner.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have this safety recall completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Ford Motor Company can deny coverage for any vehicle damage that may result from the failure to have this recall performed on a timely basis. Therefore, please have this recall performed as soon as possible. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition, there are other features such as reserving and paying for parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. |
| COVID-19 (CORONAVIRUS) | Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. |
| What if you no longer own this vehicle? | If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner. You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. |
| Can we assist you further? | If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.Fordowner.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov. Reference NHTSA Safety Recall 20V-098. |
Thank you for your attention to this important matter.
Ford Customer Service Division
Abril de 2020
JOHN A. SAMPLE
123 SAMPLE ST
SAMPLE CITY, MI 12345-6789
* * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * *
Aviso de campaña de seguridad 20S08 / Campaña 20V-098 de la NHTSA
Número de identificación del vehículo (VIN):
Este aviso se le envía de acuerdo con la Ley Nacional de Seguridad y Tránsito de Vehículos de los EE. UU. Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba.
Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel.
| ¿Cuál es el problema? | En nuestros registros se indica que anteriormente había completado la actualización de rendimiento de la aplicación 19G01 y una de las siguientes reparaciones se realizó con el fin de actualizar el cable del calentador del monoblock en su vehículo:
Sin embargo, en esa oportunidad no se instaló el cable correcto. Ford Motor Company desea asegurarse de que el cable en su vehículo sea el correcto. La ausencia de protección de calor y la longitud excesiva de dicho cable al estar cerca de otros componentes del motor podría ocasionar daños en el cable. |
| ¿Qué riesgo existe? | Si el cable del calentador del monoblock presenta daños, el riesgo de incendio aumenta cuando el vehículo está estacionado y dicho cable se conecta a un tomacorriente eléctrico. |
| ¿Qué medidas adoptarán Ford y su distribuidor? | Ford Motor Company ha autorizado a su distribuidor a inspeccionar el cable del calentador del monoblock sin costo alguno para usted (piezas y mano de obra). Si luego de la inspección se determina que es necesario reemplazar el cable del monoblock y las piezas no se encuentran disponibles para realizar la reparación, el distribuidor deshabilitará el cable del monoblock existente, de modo que no se pueda utilizar.
Ford Motor Company le enviará una carta para informarle cuándo las piezas estén disponibles. Puede comunicarse con su distribuidor para programar una reparación final en ese momento. Se prevé que las piezas estarán disponibles en el segundo trimestre de 2020. |
| ¿Cuánto tiempo tomará? | El tiempo necesario para esta reparación será menos de medio día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Además, se realizará una inspección del vehículo para determinar si se deben solicitar repuestos. |
| ¿Qué debe hacer? |
Si aún no tiene un distribuidor para realizar el servicio, puede acceder a www.Fordowner.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar esta campaña de seguridad en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Ford Motor Company puede negar la cobertura en caso de que el vehículo hubiese sufrido daños por no haber realizado la campaña de manera oportuna. Por lo tanto, le solicitamos que realice esta campaña lo antes posible. Tenga presente que: la ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones como reserva y pago de estacionamientos en ciertos lugares, además de control de ciertas funciones en el vehículo (bloqueo y desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. |
| COVID-19 (CORONAVIRUS) | Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio fundamental. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando duro para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. |
| ¿Qué pasa si usted ya no es el propietario del vehículo? | Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta.
Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. |
| ¿Podemos hacer algo más por usted? | Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda.
PROPIETARIOS MINORISTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE FLOTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.fleet.ford.com. Los representantes atienden de lunes a viernes de 8:00 a.m. a 8:00 p.m. (hora del Este). Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite www.safercar.gov. Mencione la Campaña de seguridad 20V-098 de la NHTSA. |
Gracias por su atención en este asunto sumamente importante.
Ford, División de Servicio al Cliente
April 2020
* * * IMPORTANT SAFETY RECALL * * *
Safety Recall Notice 20S08 / NHTSA Recall 20V-098
Your Vehicle Identification Number (VIN):
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above.
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support.
| What is the issue? | Our records indicate that you previously had application performance upgrade 19G01 completed, however, the correct block heater cable may not have been installed during your vehicle repair. Ford Motor Company wants to ensure the cable in your vehicle is updated to the correct level. The absence of heat protection and the excess cable length in proximity to other engine components could result in cable damage. |
| What is the risk? | A damaged engine block heater cable may increase the risk of fire when the vehicle is parked and the block heater cable is plugged into an electrical outlet. |
| What will Ford and your dealer do? | Ford Motor Company has authorized your dealer to inspect the block heater cable free of charge (parts and labor). After the inspection, if the block heater cable requires replacement, and parts are not available to repair your vehicle, your dealer will disable the existing block heater cable so that it cannot be used.
Ford Motor Company will send a letter to inform you when parts are available. You may contact your dealer to schedule a final repair at that time. Parts are anticipated to be available second quarter 2020. |
| How long will it take? | The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. In addition, your vehicle will require an inspection to determine if parts need to be ordered. |
| What should you do? | 1) Ford does not recommend owners use their engine block heater until your vehicle is inspected. If the engine block heater continues to be used, ensure the vehicle is parked outside and away from any structures, connect the system to a ground-fault circuit interrupter (GFCI) 120-volt AC electrical outlet and follow all instructions and warnings in your vehicles owner’s manual.
2) Please call your dealer without delay and request a service date for Recall 20S08. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. 3) Ford has not issued instructions to stop driving your vehicle under this safety recall. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable. You can continue to safely drive your vehicle. If you do not already have a servicing dealer, you can access www.Fordowner.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have this safety recall completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Ford Motor Company can deny coverage for any vehicle damage that may result from the failure to have this recall performed on a timely basis. Therefore, please have this recall performed as soon as possible. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition there are other features such as reserving and paying for parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. |
| COVID-19
(CORONAVIRUS) |
Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. |
| What if you no longer own this vehicle? | If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner.
You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. |
| Can we assist you further? | If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.Fordowner.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov. Reference NHTSA Safety Recall 20V-098. |
Thank you for your attention to this important matter.
Ford Customer Service Division
Abril de 2020
* * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * *
Aviso de campaña de seguridad 20S08 / Campaña 20V-098 de la NHTSA
Número de identificación del vehículo (VIN):
Este aviso se le envía de acuerdo con la Ley Nacional de Seguridad y Tránsito de Vehículos de los EE. UU.
Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba.
Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel.
| ¿Cuál es el problema? | En nuestros registros se indica que anteriormente había completado la actualización de rendimiento de la aplicación 19G01; sin embargo, el cable correcto del calentador del monoblock pudo no haber sido instalado durante la reparación de su vehículo. Ford Motor Company desea asegurarse de que el cable en su vehículo sea el correcto. La ausencia de protección de calor y la longitud excesiva de dicho cable al estar cerca de otros componentes del motor podría ocasionar daños en el cable. |
| ¿Qué riesgo existe? | Si el cable del calentador del monoblock presenta daños, el riesgo de incendio aumenta cuando el vehículo está estacionado y dicho cable se conecta a un tomacorriente eléctrico. |
| ¿Qué medidas adoptarán Ford y su distribuidor? | Ford Motor Company ha autorizado a su distribuidor a inspeccionar el cable del calentador del monoblock sin costo alguno para usted (piezas y mano de obra). Si luego de la inspección se determina que es necesario reemplazar el cable del monoblock y las piezas no se encuentran disponibles para realizar la reparación, el distribuidor deshabilitará el cable del monoblock existente, de modo que no se pueda utilizar.
Ford Motor Company le enviará una carta para informarle cuándo las piezas estén disponibles. Puede comunicarse con su distribuidor para programar una reparación final en ese momento. Se prevé que las piezas estarán disponibles en el segundo trimestre de 2020. |
| ¿Cuánto tiempo tomará? | El tiempo necesario para esta reparación será menos de medio día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Además, se realizará una inspección del vehículo para determinar si se deben solicitar repuestos. |
| ¿Qué debe hacer? | 1) Ford recomienda a los propietarios que no utilicen el calentador del monoblock hasta que el vehículo se haya inspeccionado. Si se sigue utilizando el calentador del monoblock, asegúrese de que el vehículo esté estacionado afuera y lejos de cualquier estructura. Conecte el sistema a un tomacorriente de 120 voltios de CA del interruptor de circuito de falla a tierra (GFCI) y siga las instrucciones y advertencias que se incluyen en el manual del propietario del vehículo.
2) Llame a su distribuidor lo antes posible y solicite una cita de servicio para llevar a cabo la campaña 20S08. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta. 3) Para esta campaña de seguridad, Ford no ha emitido instrucciones de no manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema lo más pronto posible. Puede continuar manejando su vehículo con seguridad. Si aún no tiene un distribuidor para realizar el servicio, puede acceder a www.Fordowner.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar esta campaña de seguridad en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Ford Motor Company puede negar la cobertura en caso de que el vehículo hubiese sufrido daños por no haber realizado la campaña de manera oportuna. Por lo tanto, le solicitamos que realice esta campaña lo antes posible. Tenga presente que: la ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones, como reserva y pago de estacionamientos en ciertos lugares, además de control de ciertas funciones en el vehículo (bloqueo y desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. |
| COVID-19
(CORONAVIRUS) |
Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio fundamental. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando duro para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. |
| ¿Qué pasa si usted ya no es el propietario del vehículo? | Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta.
Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. |
| ¿Podemos hacer algo más por usted? | Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda.
PROPIETARIOS MINORISTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE FLOTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.fleet.ford.com. Los representantes atienden de lunes a viernes de 8:00 a.m. a 8:00 p.m. (hora del Este). Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite www.safercar.gov. Mencione la Campaña de seguridad 20V-098 de la NHTSA. |
Gracias por su atención en este asunto sumamente importante.
Ford, División de Servicio al Cliente
June 2020
* * * IMPORTANT SAFETY RECALL * * *
Safety Recall Notice 20S08 / NHTSA Recall 20V-098
Your Vehicle Identification Number (VIN):
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above.
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support.
| What is the issue? | Our records indicate that you previously had application performance upgrade 19G01 and one of the following repairs performed to update the engine block heater cable on your vehicle:
However, the correct cable was not installed during your vehicle repair. Ford Motor Company wants to ensure the cable in your vehicle is updated to the correct level. The absence of heat protection and the excess cable length in proximity to other engine components could result in cable damage. |
| What is the risk? | A damaged engine block heater cable may increase the risk of fire when the vehicle is parked and the block heater cable is plugged into an electrical outlet. |
| What will Ford and your dealer do? | Parts are now available to repair your vehicle. Ford Motor Company has authorized your dealer to inspect, and if necessary, replace the block heater cable free of charge (parts and labor). |
| How long will it take? | The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. In addition, your vehicle will require an inspection to determine if parts need to be ordered. |
| What should you do? | 1) Ford does not recommend owners use their engine block heater until your vehicle is inspected. If the engine block heater continues to be used, ensure the vehicle is parked outside and away from any structures, connect the system to a ground-fault circuit interrupter (GFCI) 120-volt AC electrical outlet and follow all instructions and warnings in your vehicles owner’s manual.
2) Please call your dealer without delay and request a service date for Recall 20S08. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. 3) Ford has not issued instructions to stop driving your vehicle under this safety recall. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable. You can continue to safely drive your vehicle. If you do not already have a servicing dealer, you can access www.Fordowner.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have this safety recall completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Ford Motor Company can deny coverage for any vehicle damage that may result from the failure to have this recall performed on a timely basis. Therefore, please have this recall performed as soon as possible. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition, there are other features such as reserving and paying for parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. |
| COVID-19
(CORONAVIRUS) |
Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. |
| What if you no longer own this vehicle? | If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner.
You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. |
| Can we assist you further? | If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.Fordowner.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov. Reference NHTSA Safety Recall 20V-098. |
Thank you for your attention to this important matter.
Ford Customer Service Division
Junio de 2020
SAMPLE CITY, MI 12345-6789
* * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * *
Aviso de campaña de seguridad 20S08 / Campaña 20V-098 de la NHTSA
2015 F-150 Ford Truck
Número de identificación del vehículo (VIN):
Este aviso se le envía de acuerdo con la Ley Nacional de Seguridad y Tránsito de Vehículos de los EE. UU.
Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba.
Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel.
| ¿Cuál es el problema? | En nuestros registros se indica que usted con anterioridad llevó a cabo la actualización de rendimiento de la aplicación 19G01 y una de las siguientes reparaciones se realizó con el fin de actualizar el cable del calentador del monoblock en su vehículo:
Ford Motor Company desea asegurarse de que el cable en su vehículo sea el correcto. La ausencia de protección de calor y la longitud excesiva de dicho cable al estar cerca de otros componentes del motor podría ocasionar daños en el cable. |
| ¿Qué riesgo existe? | Si el cable del calentador del monoblock presenta daños, el riesgo de incendio aumenta cuando el vehículo está estacionado y dicho cable se conecta a un tomacorriente eléctrico. |
| ¿Qué medidas adoptarán Ford y su distribuidor? | En este momento las piezas para reparar su vehículo se encuentran disponibles. Ford Motor Company ha autorizado a su distribuidor a inspeccionar y, si fuera necesario, a reemplazar el cable del calentador del monoblock, sin costo alguno (piezas y mano de obra). |
| ¿Cuánto tiempo tomará? | El tiempo necesario para esta reparación será menos de medio día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Además, se realizará una inspección del vehículo para determinar si se deben solicitar piezas. |
| ¿Qué debe hacer? | 1) Ford recomienda a los propietarios que no utilicen el calentador del monoblock hasta que el vehículo se haya inspeccionado. Si se sigue utilizando el calentador del monoblock, asegúrese de que el vehículo esté estacionado afuera y lejos de cualquier estructura. Conecte el sistema a un tomacorriente de 120 voltios de CA del interruptor de circuito de falla a tierra (GFCI) y siga las instrucciones y advertencias que se incluyen en el manual del propietario del vehículo.
2) Llame a su distribuidor lo antes posible y solicite una cita de servicio para llevar a cabo la campaña 20S08. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta. 3) Para esta campaña de seguridad, Ford no ha emitido instrucciones de no manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema lo más pronto posible. Puede continuar manejando su vehículo con seguridad. Si aún no tiene un distribuidor para realizar el servicio, puede acceder a www.Fordowner.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar esta campaña de seguridad en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Ford Motor Company puede negar la cobertura en caso de que el vehículo hubiese sufrido daños por no haber realizado la campaña de manera oportuna. Por lo tanto, le solicitamos que realice esta campaña lo antes posible. Tenga presente que: la ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones como reserva y pago de estacionamientos en ciertos lugares, además de control de ciertas funciones en el vehículo (bloqueo y desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. |
| COVID-19
(CORONAVIRUS) |
Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio fundamental. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando duro para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. |
| ¿Qué pasa si usted ya no es el propietario del vehículo? | Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta.
Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. |
| ¿Podemos hacer algo más por usted? | Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda.
PROPIETARIOS MINORISTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE FLOTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.fleet.ford.com. Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite www.safercar.gov. Mencione la Campaña de seguridad 20V-098 de la NHTSA. |
Gracias por su atención en este asunto sumamente importante.
Ford, División de Servicio al Cliente
June 2020
* * * IMPORTANT SAFETY RECALL * * *
Safety Recall Notice 20S08 / NHTSA Recall 20V-098
2016 F-150 Ford Truck
Your Vehicle Identification Number (VIN):
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above.
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support.
| What is the issue? | Our records indicate that you previously had application performance upgrade 19G01 completed, however, the correct block heater cable may not have been installed during your vehicle repair. Ford Motor Company wants to ensure the cable in your vehicle is updated to the correct level. The absence of heat protection and the excess cable length in proximity to other engine components could result in cable damage. |
| What is the risk? | A damaged engine block heater cable may increase the risk of fire when the vehicle is parked and the block heater cable is plugged into an electrical outlet. |
| What will Ford and dealer do? | Parts are now available to repair your vehicle. Ford Motor Company has your authorized your dealer to inspect, and if necessary, replace the block heater cable free of charge (parts and labor). |
| How long will it take? | The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. In addition, your vehicle will require an inspection to determine if parts need to be ordered. |
| What should you do? | 1) Ford does not recommend owners use their engine block heater until your vehicle is inspected. If the engine block heater continues to be used, ensure the vehicle is parked outside and away from any structures, connect the system to a ground-fault circuit interrupter (GFCI) 120-volt AC electrical outlet and follow all instructions and warnings in your vehicles owner’s manual.
2) Please call your dealer without delay and request a service date for Recall 20S08. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. 3) Ford has not issued instructions to stop driving your vehicle under this safety recall. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable. You can continue to safely drive your vehicle. If you do not already have a servicing dealer, you can access www.Fordowner.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have this safety recall completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Ford Motor Company can deny coverage for any vehicle damage that may result from the failure to have this recall performed on a timely basis. Therefore, please have this recall performed as soon as possible. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition there are other features such as reserving and paying for parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. |
| COVID-19
(CORONAVIRUS) |
Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. |
| What if you no longer own this vehicle? | If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner.
You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. |
| Can we assist you further? | If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.Fordowner.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: www.fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov. Reference NHTSA Safety Recall 20V-098. |
Thank you for your attention to this important matter.
Ford Customer Service Division
Junio de 2020
* * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * *
Aviso de campaña de seguridad 20S08 / Campaña 20V-098 de la NHTSA
2016 F-150 Ford Truck
Número de identificación del vehículo (VIN):
Este aviso se le envía de acuerdo con la Ley Nacional de Seguridad y Tránsito de Vehículos de los EE. UU.
Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba.
Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel.
| ¿Cuál es el problema? | En nuestros registros se indica que usted con anterioridad llevó a cabo la actualización de rendimiento de la aplicación 19G01; sin embargo, el cable correcto del calentador del monoblock pudo no haber sido instalado durante la reparación de su vehículo. Ford Motor Company desea asegurarse de que el cable en su vehículo sea el correcto. La ausencia de protección de calor y la longitud excesiva de dicho cable al estar cerca de otros componentes del motor podría ocasionar daños en el cable. |
| ¿Qué riesgo existe? | Si el cable del calentador del monoblock presenta daños, el riesgo de incendio aumenta cuando el vehículo está estacionado y dicho cable se conecta a un tomacorriente eléctrico. |
| ¿Qué medidas adoptarán Ford y su distribuidor? | En este momento las piezas para reparar su vehículo se encuentran disponibles. Ford Motor Company ha autorizado a su distribuidor a inspeccionar y, si fuera necesario, a reemplazar el cable del calentador del monoblock, sin costo alguno (piezas y mano de obra). |
| ¿Cuánto tiempo tomará? | El tiempo necesario para esta reparación será menos de medio día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Además, se realizará una inspección del vehículo para determinar si se deben solicitar piezas. |
| ¿Qué debe hacer? | 1) Ford recomienda a los propietarios que no utilicen el calentador del monoblock hasta que el vehículo se haya inspeccionado. Si se sigue utilizando el calentador del monoblock, asegúrese de que el vehículo esté estacionado afuera y lejos de cualquier estructura. Conecte el sistema a un tomacorriente de 120 voltios de CA del interruptor de circuito de falla a tierra (GFCI) y siga las instrucciones y advertencias que se incluyen en el manual del propietario del vehículo.
2) Llame a su distribuidor lo antes posible y solicite una cita de servicio para llevar a cabo la campaña 20S08. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta. 3) Para esta campaña de seguridad, Ford no ha emitido instrucciones de no manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema lo más pronto posible. Puede continuar manejando su vehículo con seguridad. Si aún no tiene un distribuidor para realizar el servicio, puede acceder a www.Fordowner.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar esta campaña de seguridad en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Ford Motor Company puede negar la cobertura en caso de que el vehículo hubiese sufrido daños por no haber realizado la campaña de manera oportuna. Por lo tanto, le solicitamos que realice esta campaña lo antes posible. Tenga presente que: la ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones, como reserva y pago de estacionamientos en ciertos lugares, además de control de ciertas funciones en el vehículo (bloqueo y desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. |
| COVID-19
(CORONAVIRUS) |
Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio fundamental. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando duro para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. |
| ¿Qué pasa si usted ya no es el propietario del vehículo? | Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta.
Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. |
| ¿Podemos hacer algo más por usted? | Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda.
PROPIETARIOS MINORISTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.Fordowner.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). PROPIETARIOS DE FLOTAS: si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: www.fleet.ford.com. Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del Este). Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite www.safercar.gov. Mencione la Campaña de seguridad 20V-098 de la NHTSA. |
Gracias por su atención en este asunto sumamente importante.
Ford, División de Servicio al Cliente
FORD MOTOR COMPANY ISSUES A SAFETY COMPLIANCE RECALL AND TWO SAFETY RECALLS
DEARBORN, Mich., Feb. 25, 2020 – Ford Motor Company is issuing a safety compliance recall and two safety recalls in North America. Details are as follows:
Safety compliance recall for select 2018-20 Ford F-150 vehicles with LED headlamps
Ford is issuing a safety compliance recall for select 2018-20 Ford F-150 vehicles with LED headlamps. When the daytime running lamps on affected vehicles are illuminated and the master lighting switch is manually rotated from the autolamp position to the headlamp-on (low-beam) position, the daytime running lamps remain activated instead of dimming to parking lamp intensity as required by federal motor vehicle safety standards. This may reduce the visibility of other drivers, increasing the risk of a crash.
Ford is not aware of any reports of accident or injury related to this condition.
This action affects 166,196 vehicles in the U.S. and federal territories and 50,989 in Canada.
Affected vehicles were built at Dearborn Truck Plant, Jan. 5, 2017, to Oct. 10, 2019, and Kansas City Assembly Plant, Jan. 25, 2017, to Oct. 10, 2019.
Dealers will update the body control module software configuration. The Ford reference number for this recall is 20C03.
Safety recall for select 2015-16 Ford F-150 vehicles for engine block heater cable
Ford is issuing a safety recall for select 2015-16 Ford F-150 vehicles equipped with engine heater elements and 3.5-liter GTDI engines. Depending on the heater element location, some vehicles may have cables with insufficient heat protection and incorrect length. Prolonged exposure to high temperatures can cause a resistive short, inoperative engine block heater, and/or tripping of household breakers or GFCI-equipped outlets while the vehicle is parked and the block heater is plugged in.
The risk to safety exists only while the vehicle is parked and the block heater cable is plugged into an electrical outlet. A resistive short in the engine-block heater splice connector can increase the risk of overheated or melted wiring and fire. Customers are advised to not use the engine block heater cable until their vehicle is inspected.
Ford is not aware of any reports of fire, accident or injury related to this condition.
This action affects 13,854 vehicles in the U.S. and federal territories and 19,679 in Canada.
Affected vehicles were built at Dearborn Truck Plant July 31, 2014, to Sept. 27, 2016, and Kansas City Assembly Plant, Feb. 10, 2015, to Oct. 15, 2016.
Dealers will inspect the block heater and cable and repair or replace as necessary. The Ford reference number for this recall is 20S08.
Safety recall for select 2020 Ford F-Series Super Duty and 2021 Ford E-Series vehicles
Ford Motor Company is issuing a safety recall for select 2020 Ford F-Series Super Duty and 2021 Ford E-Series vehicles. In some affected vehicles, there may be an inadequate amount of axle lubricant. This can result in bearing seizure, leading to component fracture and driveshaft separation from the rear axle. In the event of a rear-axle pinion stem fracture, customers would experience loss of vehicle motive power and loss of the park function. If the parking brake is not applied, this could result in unintended vehicle movement, increasing the risk of injury or crash.
Ford is not aware of any reports of accident or injury related to this condition.
This action affects 319 vehicles in the U.S. and seven in Canada.
Affected vehicles include:
- 2020 Ford F-Series Super Duty vehicles built at Kentucky Truck Plant Jan. 12-14, 2020
- 2021 Ford E-Series vehicles built at Ohio Assembly Plant Jan. 2-16, 2020
Dealers will check the differential fluid level. If the fluid is at the proper level, no further action will be taken. If the fluid level is determined to be low, the rear axle assembly will be replaced. The Ford reference number for this recall is 20S09.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FORD | F-150 | 2015-2016 |
14 Associated Documents
Owner Notification Letter(Part 577)
RCONL-20V098-5587.pdf 96.433KB
Loading...
Reload document 
Open in new tab
Owner Notification Letter(Part 577)
RCONL-20V098-3271.pdf 97.356KB
Loading...
Recall 573 Report
RCLRPT-20V098-4446.PDF 216.109KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re Heat Block
RCMN-20V098-8717.pdf 2846.912KB
Loading...
Recall 573 Report
RCLRPT-20V098-1502.PDF 216.41KB
Loading...
Media Release – FORD MOTOR COMPANY ISSUES A SAFETY COMPLIANCE RECALL AND TWO SAFETY RECALLS
RMISC-20V098-6906.pdf 314.384KB
Loading...
Recall Acknowledgement
RCAK-20V098-8965.pdf 177.561KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re Safety Recall 20S08 –Supplement #2 Certain 2015 – 2016 Model Year F-150 Vehicles Equipped with 3.5L GTDI Engines and Engine Block Heaters Engine Block Heater Cable Inspection
RCMN-20V098-4943.pdf 2532.171KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re Safety Recall 20S08 –Supplement #1 Certain 2015 – 2016 Model Year F-150 Vehicles Equipped with 3.5L GTDI Engines and Engine Block Heaters Engine Block Heater Cable Inspection
RCMN-20V098-7302.pdf 2881.953KB
Loading...
Owner Notification Letter(Part 577) (Remedy Available)
RCONL-20V098-3475.pdf 95.503KB
Loading...
Owner Notification Letter(Part 577) (Remedy Available)
RCONL-20V098-0077.pdf 94.818KB
Loading...
Recall Quarterly Report #1, 2020-2
RCLQRT-20V098-0155.PDF 211.143KB
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V098-5850.PDF 211.336KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V098-2253.PDF 211.251KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V098&docType=RCL
- Part Number: 251919, 6B018, 251919C, 68409910AB, 28216, 28216X
- Compatible with 1989-2018 Dodge Ram Cummins Diesel 5.9, 6.7 L
- Compatible with Ford 7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 250
- Compatible with 1989-Current Dodge Cummins 5.9L Diesel Engines
- Compatible with 2007-Current Dodge Cummins 6.7L Diesel Engines
- Block Heater Cord Replaces OEM: 3600008, 251919, 6B018, 251919C, 68409910AB, 28216, 28216X.
- Engine Block Heater Cord Compatible With: 1995-Current Ford 6.0 6.4 6.7 6.8 7.3L Powerstroke Diesel. Model: E-350, E-450 ,E-550, F-250, F-350, F-450, F-550, Econoline Super Duty, Excursion, F-53 Motorhome Chassis; 1989-Current Dodge Cummins 5.9L Diesel Engines. Model: D250, D350, Ram 2500, Ram 3500, W250, W350.
- 120V Engine Block Heater Cord Compatible With: 2007-Current Dodge Cummins 6.7L Diesel Engines. Model: Ram 2500, Ram 3500, Ram 4500, Ram 5500; 2011-Current Ram Cummins 6.7L Diesel Engines. Model: 2500, 3500, 4500, 5500; 1994-Current International Harvester 7.3L Diesel Engines. Model: 4700LP, 4700LPX.
- Block Heater Cord 3600008 Specification: Voltage: 120 Volts; Current: 15 Amps; Length: 6 feet(1. 8m); Internal material: copper wire; Wire type: 16/3 HPN; Silicone connector: right angle; Pin distance: 0. 360"; Pin diameter: 0. 138".
- 120V Block Heater Cord: Designed to provide power to the engine block heater. It operates by connecting the engine block heater to a 120V power source, allowing the heater to warm up the engine block during cold weather conditions.
- Ensure quick winter starts and reduce engine wear
- For Ford, Lincoln, Mercury, International/Navistar, John Deere. See Zerostart catalog for specific applications.
- 27mm Thread
- 6' (1.8m) cord included
- Volts: 120 | Watts: 1000 | Plug Type: 120 Volt, 15 Amp (Type A)
- Ensure quick winter starts and reduce engine wear
- For Ford, Lincoln, Mercury. See Zero start catalog for specific applications.
- 1-1/2-Inch diameter
- 5. 8' (1. 8m) cord included
- Volts: 120 | Watts: 600 | Plug Type: 120 Volt, 15 Amp (Type A)
- Fitment: This Engine Block Heater will only fit 1995 and newer 7.3 engines
- Volts: 120 | Watts: 1000 | Plug Type: 120 Volt | Heater size: 3/4" NPT
- Installation Information: Replaces 3/4" threaded plug in oil cooler
- Features: Ensure quick winter starts and reduce engine wear
- Package Includes: Engine Block Heater Element and 6 feet Power Cord
- Ensure quick winter starts and reduce engine wear
- For Buick, Cadillac, Chevrolet, Ford, Lincoln, International by Navistar, Jeep, Mazda. See Zero start catalog for specific applications.
- 1-1/2-Inch diameter
- 5. 8' (1. 8m) cord included
- Volts: 120 | Watts: 600 | Plug Type: 120 Volt, 15 Amp (Type A)
- 【Block Heater Cord】120 Volts Block Heater Cord 251919 Replacement Cordset for Heavy Duty Immersion Heaters and Engine Block Heaters.
- 【Part Number】Engine block heater cord replaces part number 251919, 6B018, 251919C, 68409910AB, 28216, 28216X.
- 【Compatibility】Block heater cord compatible with Ford 7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 F250; Compatible with 1989-2018 Dodge Ram Cummins Diesel 5.9, 6.7 L; Compatible with 1989-Current Dodge Cummins 5.9L Diesel Engines; Compatible with 2007-Current Dodge Cummins 6.7L Diesel Engines.
- 【Premium Quality】Block heater replacement cord has excellent high temperature resistance, can effectively resist the cold start problem in extreme weather conditions, and can quickly heat the engine to the appropriate operating temperature.
- 【Specification】Voltage: 120 Volts; Current: 15 Amps; Length: 6-feet(1. 8m); Internal material: copper wire; Wire type: 16/3 HPN; Silicone connector: right angle; Pin distance: 0. 360"; Pin diameter: 0. 138".
- Compatible With: This Block heater cord compatible with Ford 7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 F250; Compatible with 1989-2018 Dodge Ram Cummins Diesel 5.9, 6.7 L; Compatible with 1989-Current Dodge Cummins 5.9L Diesel Engines; Compatible with 2007-Current Dodge Cummins 6.7L Diesel Engines.
- Replace OE: Designed as a direct replacement for OE part numbers 251919, 6B018, 251919C, 68409910AB, 28216, 28216X and 3600008, this block heater cord seamlessly replaces the original equipment, maintaining the vehicle's heating system at optimal performance levels.
- High Quality: Block heater replacement cord Crafted with durable materials and precision engineering, this engine block heater cord guarantees longevity and reliability, providing efficient heat transfer to the engine block, even in extreme cold conditions.
- Function: This block heater cord ensures that your vehicle's engine remains warm, promoting easier starts and reducing wear on critical engine components, especially during freezing temperatures.
- Specification : Voltage: 120 Volts; Current: 15 Amps; Length: 6-feet(1. 8m); Internal material: copper wire; Wire type: 16/3 HPN; Silicone connector: right angle; Pin distance: 0. 360"; Pin diameter: 0. 138".
- 【Application】Block Heater Cord 251919 is compatible with Ford 7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 F250; Compatible with 1989-2018 Dodge Ram Cummins Diesel 5.9, 6.7 L; Compatible with 1989-Current Dodge Cummins 5.9L Diesel Engines; Compatible with 2007-Current Dodge Cummins 6.7L Diesel Engines.
- 【Directly Replacement】Block Heater Replacement Cord manufactured with OEM specification ensures perfect fitment. Just directly replaces part number 251919,360008, 6B018, 251919C, 68409910AB, 28216, 28216X.
- 【Engine Block Heater Cord】The 120V Block Heater Cord 251919 is engineered to work seamlessly with most Heavy Duty Immersion Heaters and Engine Block Heaters.
- 【Efficient Heating】Upgrade Block Heater Cord with better conductivity ensures quick and efficient heating of your engine block in extreme cold weather , promoting easier starts, reduced wear on your vehicle, and improved fuel efficiency.
- 【Weather-Resistant】Engine Block Heater Replacement Cord made of high quality material features high temperature resistance and withstands the rigors of extreme low temperatures and provide long-lasting durability.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.