“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10153915
Manufacturer Communication Number: TSB 18-2364
Summary
Some 2015-2019 F-150 vehicles may exhibit a console media bin door that will not open or is binding. This may be due to the console media bin door inertia switch being stuck in the active position. Follow the Service Procedure steps to correct the condition.
5 Affected Products
Vehicle
MAKE | MODEL | YEAR |
FORD | F-150 | 2015-2019 |
Model:
2015-2019 F-150
Issue: Some 2015-2019 F-150 vehicles may exhibit a console media bin door that will not open or is binding. This may be due to the console media bin door inertia switch being stuck in the active position.
Action: Follow the Service Procedure steps to correct the condition.
Parts
Description | Quantity | Part Number |
Console Media Bin – Refer To The Parts Catalog For The VIN Specific Application | 1 | 1504608 |
Tool List
Drive | Tool Name |
1/4″ | Power Tool |
1/4″ | 7 mm Socket |
Flashlight | |
Pocket Screwdriver | |
Trim Tool |
Service Procedure
- Is the console media bin door stuck in the closed position with no visible damage?
(1). Yes – proceed to Step 2.
(2). No – this article does not apply. Refer to the Workshop Manual (WSM), Section 501-12 for normal diagnostics.
- Remove the console upper finish panel. Refer to the WSM, Section 501-12.
- Remove the 2 cup holder screws and remove the cup holder.
- Remove the 2 media bin retaining screws and remove the media bin.
- Inspect the inertia switch. Is the inertia switch in the active position? (Figures 1 – 2)
(1). Yes – using a non-marring pry tool, push the inertia switch toward the front of the media bin into the inactive position. Proceed to Step 6. (Figures 3 – 4)
(2). No – proceed to Step 7.
Figure 1
Figure 2
Figure 3
Figure 4
- Verify the operation of the console media bin door. Does the door open and close properly?
(1). Yes – reinstall the console media bin. To install, reverse the removal procedure. Repair is complete.
(2). No – proceed to Step 7.
- Replace the console media bin assembly.
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN
Console Media Bin Door Will Not Open Or Is Binding
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
Description | Operation No. | Time |
2015-2019 F150: Inspect, Attempt To Repair And/Or Replace The Media Bin If Necessary (Do Not Use With Any Other Labor Operations) | 182364A | 0.3
Hrs. |
Repair/Claim Coding
Causal Part: | 1504608 |
Condition Code: | 42 |
SEOCONTENT-END
18-2364
08 January 2019
https://www.nhtsa.gov/recalls?nhtsaId=10153915
https://static.nhtsa.gov/odi/tsbs/2019/MC-10153915-9999.pdf
- Combines Utility & Comfort: This is not simply a center console organizer,but an armrest box, a phone holder,a cup holder and a mini charging station for cars, minivans and trucks
- Hightlights: 1 Embeded Wireless Charging + 2 fast chaging ports + cigarette lighter.Our Upgrade Center Console SIZE : 17.1"L x 10.24"W x 7.87"H (This data is approximate, please measure whether the size is suitable before purchasing)
- What's More: Automatically triger the interir light when open the armrest cover and really romantic atmosphere, enough space for items storage.
- One Button Change: Change the button light mode according to the mood, follow your heart and make you journey unique on the way.
- Nice Wrapping: Premium Faux Leather is comfortable to touch and is easy to clean, perfect size for floor, cab, back seat and more.
- Made in the USA from high-quality recycled plastics
- 4 multi-sized cup holders
- Keeps items out of sight in large and secure storage area
- Allocate extra space to items you need with coins now sorted and allocated with front dispenser
- 27 x 8.5 x 11.5 inches (LWH)
- Custom Design: This half-sized tray organizer fits for Ford 2015-2020 F150, 2017-2022 F250 F350 F450, 2018-2024 Expedition (Full Console w/Bucket Seats ONLY).
- Extra Space: Compatible with the original piece, no more digging around in the huge console. Keeps things needed most in a very convenient location. Note: If you lost your original tray, you can buy two of our center console organizers, they also fit perfectly and work well. Two center console organizers together will keep from sliding around and rattling.
- High Quality: This half-sized tray is made of high-quality ABS plastic material with a matte finish and non-slip rubber pads.
- Easy Installation: No tools required, put the tray directly into the center console, just a few seconds.
- Good Service: If you have any questions, we will respond to you in time and try our best to solve it.
- Fitment: HECASA Center Console, will be compatible with 2013-2019 Ford Police Interceptor Sedan.
- High Performance: Crafted from premium plastic&steel, ensuring its strength and durability to withstand daily squeezing and scratching.
- Storage Space: The central console is designed with an internal storage bin, which can be used to store small items. This helps to keep the car clean and tidy and store things properly.
- Package: 1 X Center Console with 2 drink holders. Instruction not included. Mounting hardware included.
- Installation: Direct screw on. No additional drilling or modification is required.
- Fitment: KUAFU Center Console Armrest Lid, will be compatible with 2013-2019 Ford Flex. Replacement for EA8Z7406024AB, DA8Z7406024AC, FA8Z-7406024-AB.
- Stylish and Functional: Enhance the interior of your vehicle with our Black Center Console Armrest Lid. Its sleek design adds a touch of elegance while providing a convenient storage solution for your essentials.
- Durable Construction: Crafted from high-quality plastic, this armrest lid is built to last. It can withstand daily use and is resistant to wear and tear, ensuring long-lasting durability. The surface of this armrest lid is smooth and easy to clean.
- Easy Installation: Designed for hassle-free installation, this armrest lid can be easily attached using screws. Simply secure it in place and enjoy instant functionality.
- Package Included: 1 × Center Console Armrest Lid. Installation hardware and instruction are not provided.
- 🔧[HIGH QUALITY] - Our Center Console Cup Holder is made of High-Quality Plastic, no Peculiar Smell, High Temperature Resistance, Corrosion Resistance, Abrasion Resistance, and will not foam when Put in hot Drinks
- 🔧[EASY TO CLEAN] - Our Center Console Cup Holder Armrest Pad is Easy to Clean. It can be Wiped with a Damp Cloth or Washed with Water. It will not Corrode or Swell Due to Water
- 🔧[EASY TO INSTALL] - Our Center Console Cup Holder Pad is Easy to Install. After Removing the old parts, you can Install it without Tools, and it can be Done in a few Minutes
- 🔧[PACKAGE INCLUDES] - 1* Center Console Cup Holder, we will put Additional Products in the Product, Hoping to Help you when you Replace the Parts
- 🔧[VERIFY MODEL] - Please Verify the Model before Placing the Order. If you are not Sure whether the Product is Suitable for your car, you can Send an Email to Contact us for your Confirmation
- 【PERFECT FIT 】: This center console cover is designed for 2015 2016 2017 2018 2019 2020 2021 2022 F150 F250 F350 F450 F550 with 40/20/40 jump seat console. (NOT for bucket seat console and the console with work surface)
- 【KEEP IN PLACE 】: Two elastic bands design ensure pretty tight fit when you place the middle console cover over the console. It will not loose or slide back and forth. More importantly, these elastic bands will not squeeze to the fixing point on the reverse side of the console lid
- 【FULL PROTECTION】: Sinvanho jump seat armrest cover is made of scratch-resistant vegan leather, and it is wide enough to wrap the entire compartment to avoid pets' claws, fingernails, sharp objects, dirty liquids, abrasion, dust, or key scratches, provides full protection for your center console, keeps your car interior always in brand new condition
- 【WATERPROOF PU LEATHER】: Premium PU leather material is waterproof, and easy to clean, just wipe it with a towel or tissue. This armrest cover perfectly covers the old center console, makes it just like new. Get a new look with luxurious diamond quilted middle console cover!
- 【BEAUTIFUL AND COMFORTABLE】: The customized console cushion features high quality sewing and crafts and stylished appearance, makes your car armrest cushion looks luxury and density sponge design brings good resilience comfort, provides comfortable braces and relaxes your arms. A must buy for every driver who wants a more comfortable driving experience
- 🚗【CHECK FIRST】 The center console organizer tray fits 2021 2022 2023 2024 Ford F-150(Full Console w/Bucket Seats ONLY). MUST-HAVE F150 Accessories.
- 🚗【EFFECTIVE ORGANIZER】Say Goodbye to MESSY 2021 2022 2023 2024 f150 center console. Separate boxes with different capacities to keep items organized. You can have a clear view and access to small items-smartphone, wallet, pens, coins, keys, parking card, sunglasses, business card, ID card, tissue, lipstick, receipt, chewing gum, USB disk, etc.
- 🚗【LASTING DURABILITY】The center console storage tray is constructed of high quality black ABS plastic with a matte finish.
- 🚗【NO-SLIP】No-slip, removable, rubber tray liners prevent items from sliding and rattling in the 2021 2022 2023 2024 F150 tray.
- 🚗【EASY TO INSTALL】Install directly, no need to modify. In JUST a few seconds, your F150 center console will be more ORGANIZED.
- 🚘Applicable Models: Front & rear row dual cup holder expander organizer is compatible with Ford Maverick 2022 2023 2024+. The size of the original car is customized. Please confirm your car model before purchasing. (With rubber mat)
- 🚘Quality Material: Front & rear seat cup holder set is made of high quality ABS plastic which very stable and not easy to fade or deform, great workmanship for your 2022 2023 2024+ ford maverick crew cab pickup,ford maverick XL, XLT and Lariat.
- 🚘Fits Cup Holder: Put this cup holder directly on your car place, you can always put cups, bottles, or drinks, coke, and soda into the car drink holder extender anytime to prevent spills while driving. The car cup holder extender is large and deep enough to fit a variety of drinking cups, sports bottles, and thermos cups(for 2.2-3.9" diameter bottles or 10-40oz coffee cups). It can also hold small items such as sunglasses, books, mobile phones, and snacks.
- 🚘Easy to Install: Put these central control cup holders directly on your car cup holder place, you can always put cups, bottles or drinks, coke, soda into the maverick car drink holder extender anytime to prevent spills while driving.
- 🚘Aunginsy Guarantee: We offer 24 monthly guarantee service. If you have any questions about the product/installation issue, received an incorrect/damaged or if the product doesn't fit your vehicle, please don't install it and contact us, we will answer doubts/refund/exchange for you within 24 hours.
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.