Ford

Recalls, Repair & Diagnostic Tips
Menu
  • Recalls
    • Aston Martin Recalls
    • BMW Recalls
    • Bugatti Recalls
    • Chrysler Dodge Fiat Jeep Ram Alpha Romeo Recalls
    • Ferrari Recalls
    • Ford Recalls
    • GM Recalls
    • Acura & Honda Recalls
    • Hyundai Recalls
    • Isuzu Recalls
    • Jaguar & Land Rover Recalls
    • Kia Recalls
    • Lamborghini Recalls
    • Maserati Recalls
    • Mazda Recalls
    • Mercedes-Benz Recalls
    • Mitsubishi Recalls
    • Infiniti & Nissan Recalls
    • Porsche Recalls
    • Subaru Recalls
    • Suzuki Recalls
    • Tesla Recalls
    • Toyota Lexus & Scion Recalls
    • Volvo Recalls
    • VW Audi Recalls
  • Diagnostic Tips
    • Ford Diagnostic Tips
    • GM Diagnostic Tips
    • Mazda Diagnostic Tips
    • Subaru Diagnostic Tips
  • Repair Tips
    • Ford Repair Tips
    • GM Repair Tips
    • Mazda Repair Tips
    • Subaru Repair Tips
  • Links
  • E-Books
  • Store
  • oemdtc
    • Aston Martin
    • BMW
    • Bugatti
    • Chrysler Dodge Fiat Jeep Ram Alpha Romeo
    • Ferrari
    • Ford
    • GM
    • Acura & Honda
    • Hyundai
    • Isuzu
    • Jaguar & Land Rover
    • Kia
    • Lamborghini
    • Maserati
    • Mazda
    • Mercedes-Benz
    • Mitsubishi
    • Infiniti & Nissan
    • Porsche
    • Subaru
    • Suzuki
    • Tesla
    • Toyota Lexus & Scion
    • Volvo
    • VW-Audi

Amazon Sells Car & Truck Parts Search by Part Number

Buy Car & Truck Parts on Amazon
Home
Recalls
18S29 – Module Reprogramming – 2017-2018 Ford GT
Recalls

18S29 – Module Reprogramming – 2017-2018 Ford GT

oemdtc October 30, 2018 No Comments

NHTSA Campaign Number: 18V707
Manufacturer Ford Motor Company
Components STRUCTURE
Potential Number of Units Affected 176

 

Rear Wing Hydraulic Fluid Leak may Cause Fire

A hydraulic fluid leak in the presence of an ignition source can increase the risk of a fire.

 

Summary

Ford Motor Company (Ford) is recalling certain 2017-2018 Ford GT vehicles. The rear wing valve block may leak hydraulic fluid.

 

Remedy

Ford will notify owners, and dealers will perform a software update to the fully integrated vehicle controller, which eliminates the possibility of excessive pressure in the valve block assembly. Some vehicles will have a rear wing hydraulic check valve installed and will have the o-rings and the filter replaced, if needed. The repairs will be performed free of charge. The recall is expected to begin November 26, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 18S29.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if you Vehicle has a Recall


Advance Notice Safety Recall 18S29

October 9, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V707-4231.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [52.47 KB]


Miscellaneous Document – FORD MOTOR COMPANY ISSUES RECALL IN NORTH AMERICA FOR SELECT 2017-18 FORD GT VEHICLES FOR HYDRAULIC FLUID LEAK

https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V707-9296.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [58.76 KB]


Recall Acknowledgement

October 29, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V707-6932.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.06 KB]


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V707&docType=RCL


 

Service Information & Reprogramming

Service Information & Reprogramming – Ford Lincoln Mercury

Module Reprogramming

Diagnostic Software Interface Device Complete Vehicle Diagnostics Module Programming
1996-2017
Model Year
2018-Present
Model Year
1996-2017
Model Year
2018-Present
Model Year
IDS/FDRS VCM, VCM II, VCMM X X X X
FJDS/FDRS Compatible J2534 Devices
(Including VCM II and VCMM)
X X X

Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.

 

Integrated Diagnostic Software (IDS) / Ford Diagnosis & Repair System (FDRS)

For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.

 

Ford J2534 Diagnostic Software (FJDS) / Ford Diagnosis & Repair System (FDRS)

For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.

CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
CarDAQ-Plus
CarDAQ-M
VSI J2534 ECU Reprogrammer
Drew Tech Mongoose Pro USB to CAN ISO9141 Interface
   

 

 

 

 

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com


 

Bestseller No. 1
Autel MaxiCOM MK908P Diagnostic Scanner Automotive Scan Tool with ECU Programming and J2534 Reprogramming + Free Oscilloscope MaxiScope MP408
Autel MaxiCOM MK908P Diagnostic Scanner Automotive Scan Tool with ECU Programming and J2534 Reprogramming + Free Oscilloscope MaxiScope MP408
  • 【SUPERIOR CODING & PROGRAMMING】 Supports coding and programming especially for BMW and Mercedes. With the VCI of MK908P for SAE J2534-1 and J2534-2 protocols, it can replace the existing software and firmware in ECU without expensive original equipment.
  • 【WIDE DIAGNOSTIC SOLUTIONS】 Well capable of VCM coding and programming, TPMS coding, intelligent cruise control (ICC), ECU coding, live data, dashboard matching, airbag system reset, anti-theft key matching and more.
  • 【POWERFUL DIAGNOSTIC TOOL】 The oscilloscope MP408 combine with MaxiCOM MK908P is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles, providing you an insight to the inner workings of a vehicle’s electronic circuits.
  • 【HIGH-EFFICIENCY OF USE】 Being MS908P upgraded, it is Autel’s latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking, and the ergonomic design to resist damage of heavy use.
  • 【WARRANTY & UPDATE】 You can get quality related services within 12 months warranty, besides, 12 months free online update is available for the latest bug fixes and newly added parameters and car models.
$2,799.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 2
VXDIAG VCX Nano Compatible For Ford/Mazda 2 in 1 Diagnostic Tool With IDS Programming Tool
VXDIAG VCX Nano Compatible For Ford/Mazda 2 in 1 Diagnostic Tool With IDS Programming Tool
  • 🌝[Vehicle Coverage] One device Compatible for Ford and Compatible for Mazda, Support vehicle till 2018 year. (Can't Support Ford F-150 ). Support Automatic Vehicle Recognition.
  • 🌝[ECU Functions] Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.). Live Data-stream with Recording & Playback Functions for Main ECUs. New Software Re-flash for Existing ECUs.
  • 🌝[Functional] Connect via USB. Support Read & Clear Diagnostic Trouble Codes (DTCs); Set, Adjust or Remove Speed Governors; Steering Angle Resets, Guided Fault Finding&All Other Dealer Functions.
  • 🌝[Update] Update by CD with Unlocked Firmware. ★Please Note: If you have any problem when you install the software, please feel free to contact us, our technology team will provide customers service to help you solve the problem. Multilingual: Support English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil).
  • 🚩Firmware support update online. If you have any problem, please fell free contact to us, we will help you fix it by TeamViewer or message support.
$99.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 3
Autel MaxiIM IM608, 2021 Newest Top Key Programming Tool with XP400 Key Programmer & J2534 VCI, The Locksmith Tool with 31+ Service, Bi-Directional Control, OE-Level System Diagnosis (Autel Original)
Autel MaxiIM IM608, 2021 Newest Top Key Programming Tool with XP400 Key Programmer & J2534 VCI, The Locksmith Tool with 31+ Service, Bi-Directional Control, OE-Level System Diagnosis (Autel Original)
  • 🎄【BEST SCANNER FOR LOCK SMITH】Autel MaxiIM IM608 is the most advanced and unique all in one key programming and diagnostic tool that combines advanced key programming, all systems diagnostics, and advanced services. It is equipped with XP400 key programmer and MaxiFlash ECU programmer to provide complete coverage of IMMO and programming functions.
  • 🎄【BEST IMMO AND KEY PROGRAMMER】Autel key programmer IM608 enjoys the easiest way to read/write various key chips with 100% successful rate. Smart Mode and Expert Mode are provided to encrypt keys, add keys, change keys, and generate keys for 99% cars in the market with no difficulty. Key Learning, remote control learning, remote control add, etc. could all be done with IM608.
  • 🎄【MOST COST-EFFECTIVE SCANNER WITH 31+ SERVICE】Autel locksmith tool IM608 is the unprecedented key programming and diagnostic tool that you ever wanted. 31 maintenance functions include Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, ABS/SRS and more, same as Maxicom MK908P and Elite.
  • 🎄【ADVANCED ECU CODING & BI-DIRECTIONAL CONTROL】Targeting at professional mechanic, Autel IM608 has advanced coding function to help you easily reprogram adaptive data for certain components. Bi-directional control helps figure out whether a specific subsystem or component goes well. This function may appear as Actuators, Actuator Test, or Function Tests, all these could be completed in several minutes.
  • 🎄【XP400 PROGRAMMER & WIRELESS J2534 VCI】XP 400 key programmer, worth 700$, is used to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data. Equipped with XP400 key programmer and MaxiFlash ECU reprogrammer, IM608 performs IMMO Add Key, Keys Lost and Key Learning for 3rd generation Benz.
$3,299.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 4
Autel Maxisys CV MS908CV Heavy Duty Diagnostic Tool with J-2534 ECU Programming, BT, WiFi Connection
Autel Maxisys CV MS908CV Heavy Duty Diagnostic Tool with J-2534 ECU Programming, BT, WiFi Connection
  • Designed for CV ➤ Autel MaxiSys MS908CV boasts the pro-level diagnostics for Commercial Vehicles (Expert, Buses & Trucks), to get all module access for ECU Coding, Active Test (Bi-directional Control), 23 Adaptation Services, 25 Service Functions, Read/Erase Codes and Live Data, etc., being compatible with multiple supported protocols: SAE J1939, SAEJ1708, Manufacture-defined protocol J1939, Manufacture-defined J1708, KWP, VPW, UDS-CAN, CDL.
  • ECU Coding ➤ This Heavy Duty diagnostic tool allows you to re-flash the commercial vehicles’ control modules, and write in adaptive data for certain components after making repairs or replacements, to fix the issues as: Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts, etc. (Note: Coding only changes preprogrammed options already existent in the software.)
  • 23 Adaption Functions ➤ This commercial vehicle scanner provides various 23 component adaptation services, to calibrate or reset certain components after repair or replacement as: DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Accurate Reset, After Treatment Maintenance, Calibration of Rack Sensor, Calibration of Injector Trim, and others, with fast navigation for optimal efficiency.
  • 25 Service Functions ➤ This automotive diagnostic tool can Read/Clear codes, view graphic Live Data, and features an array of 25 guided maintenance services as: Oil Reset, Injector Coding, DPF, EPB, ABS/SRS, Suspension, Throttle, Odometer, Lang Change, Headlamp, CHG Tire Size, Airbag Reset, Cylinder, Turbocharging, Limit, Clutch, WIN DR ROOF, TEC Learn, Trans Adaption, Immo Keys, TPMS, BMS, Brake Bleed, Seats etc.
  • Ultimate Scanner ➤ Autel MS908CV gives you all necessary functionalities, while still remaining easy to use with boosted multitasking performance: Android 4.0 operating system, Quad-Core Processor, 2GM RAM & 32GB SSD, 9.7" 1024*768 IPS Screen, 11000 mAh Battery (8hrs non-stop operation), 5.0M AF Rear Camera, etc..This scanner is entitled to 1-year warranty with 1-year FREE software update. Welcome to contact us for your vehicle’s compatibility check, 24/7.
$2,820.00
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 5
Autel MaxiIM IM608 [with MV108 Scope] Key Programming Tool 2021 Newest No IP Restriction with IMMO and Key Programmer XP400, J2534 Reprogrammer, Bi-Directional Diagnostic Scanner All Systems Diagnosis
Autel MaxiIM IM608 [with MV108 Scope] Key Programming Tool 2021 Newest No IP Restriction with IMMO and Key Programmer XP400, J2534 Reprogrammer, Bi-Directional Diagnostic Scanner All Systems Diagnosis
  • 【KEY PROGRAMMING & IMMO Function Tool】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly. Please send VIN number to▲Autelonline @outlook.com▲ to check compatibility before purchasing.
  • 【XP400 Programmer & Powerful OE level】Powerful OE level diagnostics for more than 80 US, Asian and European makes and models. XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc
  • 【ADVANCED IMMO & J2534 VCI】The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash. J2534 can't program ECU with IM608.
  • 【ACTIVE TEST & ECU CODING & 23 Reset Services】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
  • 【No IP Restriction & 1 Year Free Update + Life-long time tech-support】More langauage are available such as French, German, Italian, Polish, Dutch, Swedish, Korean, Japanese, Russian. Please contact by providing SN if needing authorized.
$3,330.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 6
Autel IM608 Automotive Key Fob Programming Tool - MaxiIM IM608 Car Diagnostic Scanner ECU Coding/Programming Device with J2534 XP400 for Oil Reset/EPB/TPMS/BMS/SAS/DPF/IMMO Function & More Service
Autel IM608 Automotive Key Fob Programming Tool - MaxiIM IM608 Car Diagnostic Scanner ECU Coding/Programming Device with J2534 XP400 for Oil Reset/EPB/TPMS/BMS/SAS/DPF/IMMO Function & More Service
  • 【XP400 Key Programmer for IMMO & VCI-J2534 Programming】: The XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, Freescale 9S12 MCUs. The J2534 is a fully compliant SAE J2534-1/J2534-2 device, specially designed to provide users with PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus and offer the most significant features by OEM Customers.
  • 【Reliable Key Programmer & ECU Programming Tools】: Equipped with XP400 key programmer and MaxiFlash ECU re-programmer, this Autel scanner performs IMMO Add Key, All Key Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
  • 【All System Diagnostic & Advanced Maintenance Services】: Autel Diagnostics application can access the ECM of various vehicle control systems after VCI connection. The Maintenance Service covers Oil Reset/EPB/TPMS(sensor activate)/BMS/ABS(brake bleeding)/Aftertreatment/IMMO(advanced IMMO & key programming)/Injector/SAS/Suspension/Throttle/Win Dr Roof/Seats/Odometer/Lang Change/Headlamp/CHG tire size/TEC learn/SRS/Cylinder/VGT learn/Speed&PTO/Clutch/Trans adaption/Airbad reset/AF setting ...more
  • 【Active Test & ECU Coding】: During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, betweentwo operating states. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
  • 【1 Year Warranty with 45Days Replacement & Free Software Updated】: One Year Free updated through Autel Update Application. The IM608 Tablet automatically searches for available updates for all of the MaxiIM components when it's connected to the Internet. 7*24hours Local Technical Support & Satisfaction Guarantee. So Click“Buy it now”and enjoy a high-quality product with confidence. (If you need to confirm your car model, pls message us: )
$3,299.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 7
Autel MaxiCOM MK908P Automotive Diagnostic Scan Tool with J2534 ECU Programming and ECU Coding Advanced Full System Scanner 30+ Service Functions, MS908P Upgraded, With TS401 TPMS Service Tool
Autel MaxiCOM MK908P Automotive Diagnostic Scan Tool with J2534 ECU Programming and ECU Coding Advanced Full System Scanner 30+ Service Functions, MS908P Upgraded, With TS401 TPMS Service Tool
  • OE-Level OBD Scanner: The diagnostic tool serves as the most advanced automotive diagnostic tool, comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues. Welcom to contact [email protected] or ask through Q&A for your specific need and to ensure the vehicle compatibility
  • All-system Diagnose & Active Test: Provided with full-systems diagnosis(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems
  • 30+ Service Functions: As the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, MK908P also offers another 30+ service functions to help your repairing work faster, easier, and more professional, These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more
  • Broad Compatibility: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service. The MaxiFix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software
  • With TS401 TPMS Relearn Tool: Since MK908P only supports basic detection functions for TPMS, so it is equipped with TS401, a powerful TPMS tire pressure reset tool, which can help you to program a sensor and do the Relearn procedure
$2,529.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 8
CarDAQ-Plus 3 Diagnostic Code Reader and J2534 Programming Tool
CarDAQ-Plus 3 Diagnostic Code Reader and J2534 Programming Tool
  • Cardaqs # 1 Seler, Covers Everything, Great Programmer, Free Support
$1,637.00
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 9
Autel MaxiFlash Elite J2534 Pass-Thru ECU Programming Accessory Tool Original for Autel MK908, MS908, MS908S, MK908P, MS908S Pro, MaxiSys Elite
Autel MaxiFlash Elite J2534 Pass-Thru ECU Programming Accessory Tool Original for Autel MK908, MS908, MS908S, MK908P, MS908S Pro, MaxiSys Elite
  • 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook.com🚘 !
  • 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
  • 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
  • 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures quickly reprogramming even the newest controllers & Internet upgradable and updatable.
  • 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
$1,099.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 10
Autel MaxiSys MS908S Pro Diagnostic Scan Tool with J2534 ECU Programming, Proven Solution for US Market, Active Tests, 30+ Special Functions, All Systems Diagnostics (Same as MaxiSys Elite, MK908P)
Autel MaxiSys MS908S Pro Diagnostic Scan Tool with J2534 ECU Programming, Proven Solution for US Market, Active Tests, 30+ Special Functions, All Systems Diagnostics (Same as MaxiSys Elite, MK908P)
  • 👍【SAME AS MK908P & BETTER TECH SUPPORT】 MS908S Pro has EXACTLY the same diagnostics and service functions as MK908P and Autel MaxiSys Elite. Unlike online product MK908P, MS908S Pro is a mature product that has been tested and approved by workshops across US!
  • 👍【J-2534 ECU PROGRAMMING】Autel MaxiSys MS908S Pro is a professional automotive diagnostic scanner that utilizes powerful Cortex A7+A15 six-core processor that can perform OE level all systems diagnostics and various special functions. With J2534 ECU Programming Device included, it is capable of replacing the existing software & firmware and programming new ECUs(PCM, ECM) for specific BMW and Benz.
  • 👍【25 SPECIAL FUNCTIONS FOR PROS】 Autel MS908S Pro is an advanced auto scan tools that can perform various special functions: Oil Reset, EPB reset, DPF Regen, ABS Bleed, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn and etc. NOTE: Special Functions are NOT universally compatible. Pls send VIN to 🚘auteldirect @ outlook . com🚘 to check compatibility before purchase.
  • 👍【EXTENSIVE VEHICLE COVERAGE】 MS908S Pro diagnostic scanner computer covers more than 80 US, Asian and European vehicle makes. The scan tool can work on most OBDII-compliant vehicles to locate check engine issues, 80+ makes and models to scan all available systems. For special functions, coverage varies across vehicles, please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility first.
  • 👍【HASSLE-FREE PURCHASE】 Autel MaxiSys MS908S Pro car scanner comes with 12 Months FREE software updates and services and is backed by Amazon 30 Day Return Policy. If there are any issues or concerns, please contact us directly via 🚘auteldirect @ outlook . com🚘 for prompt tech support and best after-sales services! Purchase now to solve drivability issues, emission issues and save both time & money.
$2,399.00
Buy on Amazon Price incl. tax, excl. shipping

Last update on 2021-01-24 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2021-01-24 / Affiliate links / Images from Amazon Product Advertising API

Share
Tweet
Email
Prev Article
Next Article

Related Articles

Grunt Creak Squeak Chirp Noise from Lower Control Arm – 2005-2007 Ford Mustang
GRUNT/CREAK/SQUEAK/CHIRP NOISE FROM THE TSB 07-23-1 LOWER CONTROL ARM BUSHING …
Recalls oemdtc March 24, 2016 No Comments

Grunt Creak Squeak Chirp Noise from Lower Control Arm – 2005-2007 Ford Mustang

2016 Ford F-350
NHTSA ID Number: 10149784 Manufacturer Communication Number: 17M04-S2 Summary Certain 2014-2016 Model …
Recalls oemdtc January 7, 2018 1 Comment

Customer Satisfaction Program 17M04 – Crankcase Ventilation Oil Separator Assembly – 2014-2016 Ford F-Super Duty

Ford F-53/F-59
NHTSA ID Number: 10176394 Manufacturer Communication Number: ENP-738   Summary Agility® identified …
Recalls oemdtc September 16, 2020 No Comments

UPS Ford F59 Package Truck Cold Start Concern

2017 Ford Transit Connect
May 27, 2020 NHTSA CAMPAIGN NUMBER: 20V305000 Front Seat Belt Pretensioners …
Recalls oemdtc June 3, 2020 No Comments

Safety Recall 20S25 – Driver and Front Passenger Seatbelt Pretensioner Initiators – 2016-2017 Ford Transit Connect

2018 Ford E-350
June 18, 2019 NHTSA CAMPAIGN NUMBER: 19V466000 Back Up Camera Display …
Recalls oemdtc July 19, 2019 No Comments

Back Up Camera Display Image may be Reversed – SVO Group – 2017-2018 Ford E-350 & E-450 Shuttle Buses

2018 Ford Transit Dual Wheel
March 22, 2019 NHTSA CAMPAIGN NUMBER: 19V229000 Seat Back may not …
Recalls oemdtc May 2, 2019 No Comments

Seat Back may not Stay Upright – 2015-2018 Ford Transit

About The Author

oemdtc

Tags:2017 2018 Ford GT Reprogramming VDM Vehicle Dynamics Control Module

Leave a Reply

Cancel reply

CAPTCHA
Refresh

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Search

Categories

Amazon Affiliate WordPress Plugin - Automatic Product Boxes and Bestseller-Lists for your blog

Archives

Newsletter

Ford

Recalls, Repair & Diagnostic Tips

File a Vehicle Safety Complaint with NHTSA


https://www-odi.nhtsa.dot.gov/VehicleComplaint/


Ford Lincoln & Mercury VIN Decoder


https://vpic.nhtsa.dot.gov/decoder/Decoder
 
OEMDTC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Disclaimer
  • Privacy Policy
  • About
Copyright © 2021 Ford
Theme by MyThemeShop.com

Ad Blocker Detected

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker.

Refresh