| “This site contains affiliate links for which OEMDTC may be compensated” |
| TECHNICAL SERVICE BULLETIN Fuel Slosh Noise During Low Speed Parking Lot Maneuvers And/Or When Stopping |
18-2003 09 May 2018 |
Model:
| Ford
2013-2018 Escape |
| Lincoln
2015-2018 MKC |
Issue: Some 2013-2018 Escape and 2015-2018 MKC vehicles may exhibit a fuel slosh noise during low speed parking lot maneuvers and/or when coming to a stop. The concern may be more noticeable when the fuel level in the tank is 3/4 to full.
Action: Follow the Service Procedure steps to correct the condition.
Parts
| Description | Quantity | Part Number |
| Fuel Tank Strap Isolator | 4 | DV6Z-00812-B |
| Fuel Tank Strap, Left | 1 | JV6Z-9054-B |
| Fuel Tank Strap, Right | 1 | JV6Z-9054-A |
| Fuel Tank Strap Bolt And Washer | 1 | W718813-S442 |
| Exhaust Gasket | 1 | CV6Z-9450-D  |
| Exhaust Nuts, Escape | 1 | W520103-S442 |
| Exhaust Nuts, MKC | 1 | W520103-S403 |
| Driveshaft Bolts | 6 | 5F9Z-4682-AA |
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| Description | Operation No. | Time |
| 2013-2018 Escape 4X2, 2015-2018 MKC FWD: Replace Both Fuel Tank Straps Includes Time To Road Test (Do Not Use With Any Other Labor Operations) | 182003A | 1.3 |
| 2013-2018 Escape 4X4, 2015-2018 MKC AWD: Replace Both Fuel Tank Straps Includes Time To Road Test (Do Not Use With Any Other Labor Operations) | 182003B | 1.7 |
Repair/Claim Coding
| Causal Part: | 9054 |
| Condition Code: | 42 |
| Drive | Tool Name |
|---|---|
| 1/4″ | Ratchet |
| 1/4″ | 6″ Extension |
| 1/4″ | Torx T45 |
| 1/4″ | Power Tool |
| 1/4″ | 10 mm Swivel Socket |
| 3/8″ | Ratchet |
| 3/8″ | Power Tool |
| 3/8″ | Torque Wrench |
| 3/8″ | 6″ Extension |
| 3/8″ | 24″ Extension |
| 3/8″ | 10 mm Socket |
| 3/8″ | 13 mm Socket |
| 3/8″ | 15 mm Socket |
| 3/8″ | 13 mm Swivel Socket |
Service Procedure
1. Drive the vehicle and perform low speed parking lot maneuvers. Does the vehicle exhibit a fuel slosh noise during the parking lot maneuvers and/or when coming to a stop?
(1). Yes – proceed to Step 2.
(2). No – this article does not apply. Refer to Workshop Manual (WSM), Section 100-04 for normal diagnostics.
2. Remove and discard the fuel tank straps and fasteners. Refer to WSM, Section 310-01.
(1). It is not necessary to depressurize the fuel system, drain the fuel tank, disconnect the fuel lines and remove the fuel tank to replace the straps.
3. Install new straps, isolator assemblies and fasteners.
4. To install, reverse the removal procedure. Refer to WSM, Section 310-01.
18-2003
Loading...
Reload document 
Open in new tab
- The world’s #1 fuel additive for both gasoline and diesel engines
- A great tune-up in a bottle – treats gasoline, diesel fuel and increases MPG
- Cleans and lubricates the fuel system, including fuel injectors, carburetor and combustion chamber
- Improves fuel economy by burning excess exhaust emissions
- Increases power and acceleration by improving fuel flow and reducing deposit buildup
- ALL-ROUND ENGINE SOLUTION - Works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle or gas powered tool
- ETHANOL PROBLEM SOLVER - Prevents and cures most ethanol-related issues, including poor performance and decreased fuel economy
- OLD FUEL REVITALIZER - Stabilizes fuel up to 2 years and can help rejuvenate old, sub-spec fuel, even after months of inactivity
- FUEL ECONOMY MAXIMIZER - Removes and prevents gum, carbon deposits, and varnish build-up, resulting in improved fuel economy
- WATER BUILD-UP PREVENTION - Disperses water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates
- Cleans and lubricates the fuel system
- Increases the life of pumps and injectors
- Neutralizes low sulfur fuel problems
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases the life of pumps and injectors
- Cleans and lubricates the fuel system
- Neutralizes low sulfur fuel problems
- Contains 100% high-energy solvent technology
- Helps keep injectors or carb(s) and intake ports and valves clean
- Quickly disperses moisture and dissolves gum, varnish, and other fuel residues
- Disperses moisture in conventional gasoline
- Catalytic Converter and O2-Sensor Safe
- Formulated to help save gas and lower emissions by deep cleaning the entire fuel system
- Formulated to help restore peak performance and reduce friction by lubricating engine parts
- Formulated to help prevent ethanol deposits and inhibit corrosion
- Works with modern gasoline engines such as turbo, direct inject and hybrid vehicles
- Compatible with cap-less gas systems
- Helps your entire fuel system run smoother and last longer
- Cleans fuel injectors and carburetor passageways
- Cleans intake valves and chamber deposits
- Lubricates upper cylinders
- Safe for all gasoline and diesel engines
- The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports
- Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles
- Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- Recommended use every 3,000 miles and will not void OEM/manufacturer’s warranty
Last update on 2024-06-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
