“This site contains affiliate links for which OEMDTC may be compensated” |
TSB 17-0046 | PICKUP – 34-GALLON FUEL TANK – CUSTOMER CONCERN FUEL TANK IS LESS THAN ADVERTISED CAPACITY – BUILT ON OR BEFORE 01-APR-2017 |
Publication Date: May 31, 2017 |
FORD: | 2017 F-250, F-350, F-450 |
ISSUE:
Some 2017 F-Super Duty pickups equipped with a 34-gallon fuel tank and built on or before 01-Apr-2017 may exhibit a customer concern that the fuel tank is less than advertised capacity. This may be due to a greater total reserve capacity than anticipated once the fuel level gauge and/or distance to empty (DTE) message indicates the fuel tank is empty.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Check the vehicle wheelbase. The 34 gallon fuel tanks are standard on all gasoline pickups with a 142″, 148″, 160″ and 164″ wheelbase and on all diesel pickups with 160″ or 164″ wheelbase. Use the additional information link on the Online Automotive Service Information System (OASIS) report or the window sticker to determine wheelbase. Is the vehicle equipped with the 34-gallon fuel tank?
- Yes – proceed to Step 2.
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 413-01 for normal diagnostics.
- Was the vehicle built on or before 01-Dec-2016?
- Yes – replace the fuel tank and fuel level sender. Refer to WSM, Section 310-01. Repair is complete.
- No – proceed to Step 5.
- Was the vehicle built on or before 20-Mar-2017?
- Yes – replace the fuel tank and fuel level sender. Refer to WSM, Section 310-01. Repair is complete.
- No – proceed to Step 5.
PART NUMBER | PART NAME |
HC3Z-9A299-M | Gas Engine Fuel Level Sender Assembly |
HC3Z-9A299-N | Diesel Engine Fuel Level Sender Assembly |
HC3Z-9002-N | Gas Fuel Tank |
HC3Z-9002-M | Diesel Fuel Tank |
4L3Z-9276-AA | Fuel pump O-ring |
OPERATION | DESCRIPTION | TIME |
170046A | 2017 F-Super Duty Pickup: Replace The Fuel Tank And The Fuel Level Sender If Required Includes Time To Remove And Install Fuel Tank And Transfer Necessary Components (Do Not Use With Any Other Labor Operations) | 1.4 Hrs. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
BASIC PART NO. | CONDITION CODE |
9002 | 42 |
- Take Care Of Your Engine With An Every-Tank Solution For Better Performance And Health
- Boosts Cetane Up To 7 Points For Better Fuel Economy And Maintenance
- Adds Lubricity To Protect Fuel System Including Pump And Injectors
- Prevents Rust And Corrosion, Disperses Moisture And Adds Stability To Fuel
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Fit type: Universal
- Part number: 3064-06
- 40.6 oz bottle treats 400 gallons - Use at every fill-up
- Formulated to address issues with modern diesel fuels
- Incorporates Archoil's proven combustion modifier technology and a strong cetane boost to increase power and response
- Cleans, lubricates and protects your fuel system (including HPCR systems)
- Increases fuel economy (MPG)
- Cleans Fuel System – Deeply cleans any diesel engine’s fuel system including injectors, cylinders, fuel lines, tank, and tank in one fuel treatment lasting up to 6,000 miles
- Cleans Fuel Injectors – Safely removes and prevents Internal Diesel Injector Deposits (IDIDs), External Diesel Injector Deposits (EDID’s) and other forms of varnish and deposits
- Boosts Cetane – Increases cetane by up to 7 points after the fuel system is fully cleaned, for an even more effective boost in combustion, fuel economy, and engine power while reducing DPF regens
- Increases Mileage – Maximizes your MPG's and helps you save at the pump by improving engine performance and fuel combustion, so you can get the most out of your diesel fuel
- Stabilizes and Prevents Rust, Disperses Moisture – Keeps diesel “healthy” using a military grade non-alcohol-based water dispersant plus rust and corrosion inhibitors
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Includes AR6500 Diesel Treatment (40 oz)
- Includes AR6400-D Diesel Fuel System Cleaner
- Restore key fuel system components - injectors, turbo & dpf
- Boost cetane, improve performance and MPG
- AR6400-D is not the remedy for HEUI injector stiction. Please use AR9100 Friction Modifier instead
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Removes both internal and external deposits on fuel injectors
- Restores lost power and fuel economy
- Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by poor quality Ultra Low Sulfur Diesel (ULSD) fuel
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.
- Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.
- Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.
- Increases Power and Acceleration: The product can also help to increase power and acceleration by improving the flow of fuel through the system and reducing the buildup of deposits that can impede engine performance.
- Neutralizes Low Sulfur Fuel Problems: Lucas Oil 10013 Fuel Treatment contains a blend of detergents and additives that help to neutralize sulfur and other harmful contaminants that may be present in the fuel system. The detergents work to clean the fuel injectors and carburetor, which can become clogged with sulfur deposits over time.
Last update on 2024-04-06 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.