Incorrect Easy Entry Easy Exit Feature Operation – 2018 Ford F-150
November 10, 2017
SSM 46894 – 2018 F-150 – Incorrect Easy Entry Easy Exit Feature Operation – Built On Or Before 4-Oct-2017
Some 2018 F-150 vehicles built on or before 4-Oct-2017 may exhibit the driver seat only moving 1/2 inch during easy entry easy exit operation.
Perform a Driver Seat Module (DSM) reset using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 107.04 or higher.
Select Toolbox – Body – Service Functions – DSM Reset then perform an Automatic As-Built data update.
For claiming, use causal part 14C708 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual.
2018 TRUCK: FC P552 F150
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data