| “This site contains affiliate links for which OEMDTC may be compensated” |
2012-2016 Focus Electric – Battery Energy Control Module (BECM) Reprogram Required Following High Voltage (HV) Battery Pack Replacement
2012-2016 Focus Electric vehicles which have a high voltage battery replaced must also have the BECM reprogrammed to the latest calibration using the Integrated Diagnostic System (IDS) release 106.02 or higher.
This ensures the correct time to charge is displayed and aligns new BECM software with the powertrain control module (PCM) and the transmission control module (TCM) software.
Please provide the customer information sheet shipped with the new battery to the customer.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
