NHTSA ID Number: 10149764
Manufacturer Communication Number: SSM 47527
Summary
Some 2015-2019 Transit vehicles may have unique accessory drive noise characteristics. Engineering review of warranty returned belt tensioners has not identified an out of specification part, nor have abnormal sounds been recreated during on-vehicle evaluations with warranty returned tensioners. Before attempting a repair for an accessory drive system noise, compare the sound to a like Transit vehicle in similar RPM and temperature conditions. If the sound is not characteristic, use chassis ears to help isolate the source of the noise. If tensioner replacement is deemed necessary, use the Report a Vehicle Concern link at the bottom of the vehicle’s OASIS screen and submit a detailed Global Concern Report highlighting the specific conditions when the noise was observed.
4 Affected Products
Vehicle
SSM 47527
https://www.nhtsa.gov/recalls?nhtsaId=10149764
https://static.nhtsa.gov/odi/tsbs/2018/MC-10149764-9999.pdf
SSM 46889
https://www.nhtsa.gov/recalls?nhtsaId=10125087
https://static.nhtsa.gov/odi/tsbs/2017/MC-10125087-9999.pdf
Bestseller No. 1
Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included - 648629
- For removing and installing serpentine belts on vehicles with spring-loaded belt tensioners
- Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo.
- INCLUDES: Complete accessory kit included for multi vehicle applications
- COMES IN: Heavy duty blow molded case to keep set protected and organized
- EASY TO READ: Includes detailed usage instruction with photos
Bestseller No. 2
EWK Timing Chain Tensioner Holding Tool for VW Audi 1.8T 2.7T 2.8 3.2 4.2 3366
- 【Easy operation】This tool is for the purpose to relieve the tension on the camshaft chain and lift it up far enough to clean, remove and replace the gasket and seal. Easy installation for you to adjust the engine cam by yourself.
- 【 Accurate Design 】Compatible with VW Audi 1.8T 2.7T 2.8 3.2 4.2 engines. For accurate camshaft locking, timing chain installation and removal.
- 【 Damage Free 】The plastic material is designed to prevent the tool from damaging the chain tensioner if use it improperly. Comes with chain adjuster bracket OEM no. 3366.
- 【Wide Applications】Suitable for VW Golf, Jetta, New Beetle, Passat, Touareg ; Audi A4, A6, A6 Quattro, A8 Quattro, TT Quattro, RS4, RS6. Please carefully check the model of your vehicle with the application sheet to verify this is the part you need.
- 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance.
SaleBestseller No. 3
Dorman 924-5528 Accessory Drive Belt Tensioner Tool Compatible with Select Mack/Volvo Models
- Ideal tool - this drive belt tensioner tool is designed to release the belt tensioner when removing or installing accessory belts on specified vehicle applications
- Durable construction - this tensioner tool is made using quality components to ensure durability and performance
- Convenient solution - matches the function of the factory tool at a competitive price
- Quality tested - this tool has undergone testing to ensure a quality fit and reliable performance
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Bestseller No. 4
OEMTOOLS 24687 Serpentine Belt Tool Set | Includes 3/8 Drive Handle, 1/2 & 3/8 Square Drive Adapters, & 4 Shallow Sockets (13, 15, 16, & 18 mm) | Release Spring Pressure & Remove Tensioner Pulley
- HEAVY DUTY DESIGN: Features a long, 3/8 inch square drive handle for serpentine belt jobs requiring extra leverage
- WIDELY USEFUL: Features a 1/2 inch drive adapter, and 4 sockets, sizes: 13, 15, 16 and 18 mm
- IT JUST WORKS: This Serpentine Belt Tool Set provides the required leverage and clearance to release the spring pressure and remove the tensioner pulley
- DURABLE BUILD: Serpentine Belt Tool is formed of a special alloy steel and features a black oxide finish for additional durability and to resist rust
- FULL SPECIFICATIONS: 3/8 Inch drive steel handle with 1/2 inch drive adapter; 13 mm, 15 mm, 16 mm, and 18 mm sockets; for removing and installing serpentine belts
Bestseller No. 5
CTA Tools 8064 Chain Tensioner Lever - Compatible with VW
- Used for creating slack on the chain tensioner for replacing the timing chain without the need for removing the front cover
- Necessary for pushing in the upper timing chain from the camshaft
- Needed for EA888 Generation III engines but can facilitate work on Generation I & II
- Compare to With Audi Factory Tool #T40243
- Applications: All With Audi vehicles with 1. 8 TSI & 2. 0 TFSI
SaleBestseller No. 6
CTA Tools 2670 Toyota Timing Belt Tensioner Compressor
- Includes One Toyota Timing Belt Tensioner Compressor
- Engineered for 1990 and Up T100, Tacoma and 4-Runner Trucks
- Design Features a Internal Nut to Expand Tool
- Features a Locking Pin for Hydraulic Piston Push Rod
- Expertly Designed And Crafted To The Exacting Standards Expected From CTA Tools
Bestseller No. 7
OTC 4849 Cam Chain Tensioner Unloader Tool for Harley-Davidson Twin Cam 88s
- Used to unload the pressure of the primary and secondary chain tensioners when servicing HD Twin Cam 88 engines
- Tools can also be used to check spring loads on chain tensioners
- Applications include 99-06 FL, 99-05 FXD, 00-06 FXST
- Similar to HD-42313
- Durable materials ensure quality performance over the lifetime of the tool
Bestseller No. 9
Eastwood Ratcheting Serpentine Belt Wrench Tool Belt Remove and Install Kit Automotive Repair Kit Socket
- The Serpentine Belt Tool Set Is An Integral Tool When Removing And Installing Serpentine Belts With Spring-Loaded, Idler Pulleys. The 23-Inch Long Slender Design Provides Proper Reach And Prevents Damage.
- Serpentine Belt Tool Removes Tension On Spring-Loaded Idler
- Eases Removal And Installation Of Serpentine Belts
- Extension Bar For Hard To Access Areas
- 3/8 in. Drive Chrome Vanadium Sockets In 13,15, 16 And 18Mm
Bestseller No. 10
303-1248 303-1530 Camshaft Holding Tool and Chain Tensioner Set Compatible with OTC 6682 Fit for Ford 3.5L 3.7L 4V Engines
- VEHICLE FITMENT: Fit for Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Please kindly confirm more compatibility details on the below product descriptions before purchase.
- INTENDED USE: Use this tool to accurately position and align hold your compatible with Ford 3.5L & 3.7L camshaft at TDC to perform service, simplifying your timing chain work. Insert the chain tensioner hold down tool through the hole in the top of the mega gap. Position it against the mega gap to retain the tensioner in the compressed position.
- PROFESSIONAL TIMING TOOL: Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility. Replace 303-1248 303-1530. The camshaft timing alignment holder tool work great holding the cams to do a water pump, easy to used and holds well.
- SUPERIOR QUALITY: Made of high standard structural steel with excellent solid and great durability. coated with black oxide finish for resisting rust and crack to long-lasting service your engine. Package include 2 X Camshaft Holding Tools, 1 X Tension Tool.
- 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool Set, simply return it for a full refund in 30 days.
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API
