| “This site contains affiliate links for which OEMDTC may be compensated” |
2015-2016 F-150 2.7L And 3.5L GTDI – Engine Sound Enhancement – Programmable Parameter
2015-2016 F-150 vehicles with a 2.7L or 3.5L GTDI engine may be equipped with an engine sound enhancement (ESE) feature.
ESE is an audio system feature that enhances certain engine tones typically induced under wide open throttle or heavy part-throttle conditions.
Refer to Workshop Manual, Section 415-00 for description and operation.
The ESE feature is a programmable parameter of the audio control module (ACM) that can be disabled and/or enabled by using IDS version 96.02 or higher.
Disabling or enabling the ESE feature for customer preferences isa non warrantable repair.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
