February 16, 2021 NHTSA CAMPAIGN NUMBER: 21V074000
Incorrect Front Lower Control Arms
An incorrect lower control arm may affect vehicle handling and control, increasing the risk of a rollover crash.
NHTSA Campaign Number: 21V074
Manufacturer Ford Motor Company
Components SUSPENSION
Potential Number of Units Affected 106
Summary
Ford Motor Company (Ford) is recalling certain 2021 Bronco Sport vehicles. These vehicles may have been produced with incorrect front lower control arms.
Remedy
Ford will notify owners, and dealers will inspect and replace the front lower control arms, if necessary, free of charge. The recall began April 9, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 21S03.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
AFFECTED VEHICLES
Vehicle | Model Year | Assembly Plant | Build Dates |
Bronco Sport | 2021 | Hermosillo | December 9, 2020 through December 9, 2020 |
REASON FOR THIS SAFETY RECALL
In some of the affected vehicles, an incorrect lower control arm may have been installed at the assembly plant. A vehicle equipped with the incorrect lower control arm may experience a vehicle stability concern that may increase the risk of rollover at max roof load.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to inspect vehicle for the correct control arm part number (LH and RH). Any incorrect front lower control arm will be replaced, and the front suspension will be aligned. This service must be performed on all affected vehicles at no charge to the vehicle owner.
OWNER NOTIFICATION AND MAILING SCHEDULE
Owner letters are expected to be mailed the week of April 5, 2021. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
SOLD VEHICLES
- Ford has not issued instructions to stop selling/delivering or driving used vehicles under this safety recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles if they do not place any equipment, luggage or load on the roof until after this safety recall is performed.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Correct all affected units in your new vehicle inventory before delivery.
- Use OASIS to identify any affected vehicles in your used vehicle inventory.
DEALER-OPERATED RENTAL VEHICLES
The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
PARTS REQUIREMENTS
Description | Order Quantity | Claim Quantity | Part Number |
RH Lower Control Arm (1 required, package of 1) | 1 | 1 | LX6Z-3078-G |
LH Lower Control Arm (1 required, package of 1) | 1 | 1 | LX6Z-3079-G |
Bolts – Front outer side member (M10 x 65, RH) (3 required, package of 4) | 1 | 3 | W500725-S439 |
Lower arm forward bolt (1 required per control arm, package of 4) | As Required 1 or 2 | 1 | W718909-S900 |
Lower arm rearward bolt (1 required per control arm, package of 4) | As Required 1 or 2 | 1 | W719470-S439 |
Bolts – Front outer side member (M10, Bolt) (1 required, package of 4) | 1 | 1 | W721130-S439 |
Description | Order Quantity | Claim Quantity | Part Number |
Bolts – Front outer side member (M10 x 75MM, LH) (3 required, package of 4) |
1 | 3 | W500727-S439 |
Lower Arm Rearward Nut (1 required per control arm, package of 4) | As Required 1 or 2 | 1 | W520215-S440 ![]() |
Ball Joint Pinch Bolt Nut (1 required per control arm, package of 4) | As Required 1 or 2 | 1 | W520515-S442 |
Box Nuts (9 required, package of 4) | 3 | 9 | W718770-S439 |
Ball Joint Pinch Bolt (1 required per control arm, package of 4) | As Required 1 or 2 | 1 | W719924-S439 |
CERTAIN 2021 MODEL YEAR BRONCO SPORT VEHICLES — FRONT LOWER CONTROL ARM
SERVICE PROCEDURE
1. Position the vehicle on a hoist. Please follow the Workshop Manual (WSM) procedures in Section 100-02.
2. Locate and record the three engraved letters on the rear portion of both front lower control arms. See Figure 1.
a. Left Hand (LH) Side _______
b. Right Hand (RH) Side _______
3. Do both of the front lower control arms have the three engraved letters AMA displayed? See Figure 1.
If YES – This completes the recall.
If NO – Replace the affected front lower control arm. Please follow the WSM procedures in Section 204-01.
IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. Unless a part is requested to be returned to Ford, all parts replaced under this FSA must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Refer to the Parts Retention, Return, & Scrapping section of the FSA dealer bulletin for further information.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
FORD | BRONCO SPORT | 2021 |
8 Associated Documents
Manufacturer Notices(to Dealers,etc) – Dealer Bulletin re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S03 Certain 2021 Model Year Bronco Sport Vehicles Front Lower Control Arms Inspection
Recall Acknowledgement
RCAK-21V074-5008.pdf 645.195KB
Defect Notice 573 Report
RCLRPT-21V074-5760.PDF 213.88KB
ISSUED Owner Notification Letter(Part 577)
ISSUED Renotification Notice
RCRN-21V074-6215.pdf 545.491KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V074-7180.PDF 211.213KB
Recall Quarterly Report #1, 2021-2
RCLQRT-21V074-3600.PDF 211.213KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V074-1632.PDF 211.302KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V074&docType=RCL
- 【Fitment】Fit for 2004-2020 F150. Better replacement OEM control arms, lift the vehicle 0-2”.The control arm could perfectly fit the stock wheels. But If you have exchange an aftermarket rims, please contact our customer service to confirm.
- 【Notes】1、the ball joints don't require extra grease;2、Please tighten the zerk at any direction after refilling grease. Do not over-tighten the zerks, they are made of copper and easy to be snapped off;3、Alignment is required after installing the arms.
- 【Safety Guarantee】TIG welding and Larger tubular of upper control arms are more solid and stable,enhancing safety performance.
- 【Better Driving Performance】PU BUSHING instead of rubber bushing,more suitable for low temperatures;DUST CAP increase service lift;Reasonable structural design provide better driving performance of off-road. After a comprehensive upgrade,2.0 generation improve the angle of pipe.Your trucks can be lifted 2 inches without changing shock absorbers.
- 【Warranty】We offer "30-day refund,12-month warranty of ball joint ".Feel free to contact us if you have any problems.
- COMPATIBLE WITH 1981 - 1996 Ford F-150 (2WD) and 1983 - 1996 Ford Ranger (2WD). *Will not fit special XL Model, Extended Cabs or any vehicles with Twin I-Beam Suspension.
- CONTENTS: (2x) High Density Delrin Coil Spring Spacers, (2x) 3/4" Stud Extenders, (2x) ProComp ES9000 Performance Shocks, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 2 inch front suspension leveling lift.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
- PRO COMP SHOCKS: With their twin tube construction and 10 stage velocity sensitive valving, these shock absorbers are the perfect complement to your lifted vehicle and will deliver a more stable, controlled, and comfortable ride. The extended length over factory lengths provides you with the ability to use your suspensions new fuller range of motion while eliminating binding and shock limiting.
- 【Fitment】 For Ford Mustang S-197 and For Ford Mustang GT S-197 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014;
- 【24 Rebound Force Levels for More Control】 Level 0-8 suggest for race tracks use;Level 9-16 suggest for mountain anfractuosities use;Level 17-24 suggest for street use. You can adjust it at any time to suit your needs.
- 【Spring Rate】 Front: 8 kg/mm (448 in/lbs) & Rear: 6kg/mm (336 lbs/in). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- 【Lowering Kits】 The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will "Lower your car" and DOES NOT keep to original ride height.
- 【Twin-tube Structure】 Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- High quality
- High performance
- Professional products
- Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
- Durability is superior for cars, trucks and SUVs; road salt, oil, and a host of other common under car contaminants will eventually destroy the rubber bushings on your vehicles, not to mention the weight and torque forces that typically compress rubber
- Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
- Hyper-Flex is offered in a variety of durometers (firmness or softness), depending on product application; performance tested and race proven; used for all of Energy Suspension products that require a higher level of performance and durability
- If you are modifying, building a new vehicle for scratch or restoring an old one, Energy Suspension's Hyper-Flex performance polyurethane should be the 'ground zero' focus of your present and next vehicle plans
- Over two decades of in-house experience in innovating, engineering and formulating wide selection of polyurethane components for many different industries, Energy Suspension has qualified as premier manufacturer of the high quality polyurethane products
- High quality
- High performance
- Professional products
- Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
- Give your F-150 the Perfect Blend of Performance, Protection, and Style from Rough Country.
- Unmatched Ground Clearance | Premium N3 Shock Absorbers the Best in Performance for On and Off-Road Use.
- Levels the front with the rear of the vehicle
- Easy at Home Installation and Support Provided by RC. Gives you Excellent Ride Quality.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
- Durability is superior for cars, trucks and SUVs; road salt, oil, and a host of other common under car contaminants will eventually destroy the rubber bushings on your vehicles, not to mention the weight and torque forces that typically compress rubber
- Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
- Hyper-Flex is offered in a variety of durometers (firmness or softness), depending on product application; performance tested and race proven; used for all of Energy Suspension products that require a higher level of performance and durability
- If you are modifying, building a new vehicle for scratch or restoring an old one, Energy Suspension's Hyper-Flex performance polyurethane should be the 'ground zero' focus of your present and next vehicle plans
- Over two decades of in-house experience in innovating, engineering and formulating wide selection of polyurethane components for many different industries, Energy Suspension has qualified as premier manufacturer of the high quality polyurethane products
- Package Dimensions: 16 L x 5 H x 5 W (inches)
- Package Weight : 22 pounds
- Country of Origin : India
- Part number: 62203
- 【Fitment】 For Ford Mustang S-197 and For Ford Mustang GT S-197 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014;
- 【Spring Rate】 Front: 8 kg/mm (448 in/lbs) & Rear: 6kg/mm (336 lbs/in). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- 【Lowering Kits】 The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will "Lower your car" and DOES NOT keep to original ride height.
- 【Twin-tube Structure】 Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- 【Excellent Material】The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
Last update on 2022-06-20 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.