Lariat – Snow Plow/Start-Stop Deactivation Buttons – Incorrect Button Illumination – 2020 Ford F-150

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10183417

Manufacturer Communication Number: TSB 20-2385

Summary

Some 2020 F-150 Lariat vehicles equipped with the snow plow prep package may exhibit the snow plow button illuminating when you press the start/stop deactivation button, and the start/stop deactivation indicator illuminating when you press the snow plow button. Both features otherwise function correctly, and the correct messages illuminate in the message center when pressing either button. This may be due to incorrect switch circuitry. To correct the condition, follow the Service Procedure steps to swap circuit pin locations.

 


2020 Ford F-150
2020 Ford F-150

 


Model:

Ford

2020 F-150

 

Issue: Some 2020 F-150 Lariat vehicles equipped with the snow plow prep package may exhibit the snow plow button illuminating when you press the start/stop deactivation button, and the start/stop deactivation indicator illuminating when you press the snow plow button. Both features otherwise function correctly, and the correct messages illuminate in the message center when pressing either button. This may be due to incorrect switch circuitry. To correct the condition, follow the Service Procedure steps to swap circuit pin locations.

 

Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria:

  • 2020 F-150 Lariat
  • Equipped with snow plow package
  • Start/stop deactivation button and the snow plow button indicator illumination incorrect

 

Service Procedure

1. Remove the front controls interface module (FCIM). Refer to Workshop Manual, Section 415-00C.

2. Disconnect connector C2480 from the start/stop deactivation and snow plow mode button.

3. Remove pins #1 and #6 from connector C2480. (Figure 1)

Figure 1

connector C2480

 

4. Reinstall the pins into the opposite positions, so the BN wire (circuit CE469) is in location 6 and the GYBU wire (circuit CPD02) is in location 1. (Figure 2)

Figure 2

connector C2480

 

5. Install the FCIM. Refer to Workshop Manual, Section 415-00C.

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
FORD F-150 2020

 

 


1 Associated Document

Manufacturer Communications

20-2385
02 November 2020

https://www.nhtsa.gov/recalls?nhtsaId=10183417

MC-10183417-0001.pdf 295.513KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [288.59 KB]

 


 

SaleBestseller No. 1
Lisle 57780 Terminal Tool for Ford, One Size, Factory
  • Made To Withstand Even The Toughest Jobs
  • Designed With The User In Mind
  • Fit To Match The Needs In The Shop, At Home Or In The Field
  • Proven And Tested For Durability And Function In Real-World Conditions
  • Crafted With The User In Mind Using The High-Quality Materials And World-Class Craftsmanship
SaleBestseller No. 2
Terminal Pin Removal Tool Kit 82 Pcs Depinning Electrical Connector Pin Extractor Tool Set Wire Terminal Release for Automotive Car Household Devices
  • 【Package Include】Offers single, double pin extractors and casting tool of different sizes to fit most terminals. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and 1 Protective Case.
  • 【Depinning Tool with Protective Case】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your depinning tools in it to make it more portable and prevent children from playing with them.
  • 【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient.
  • 【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, motorcycles and other electronic devices like household appliances.
  • 【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses are held in place with barb clips. You can use a tool to lift or flatten the barbs, and then gently pull out the wire ends. Pay special attention to strength and direction.
Bestseller No. 3
Prokomon 23pcs Car Universal Terminal Release Removal Tool Set Automotive Wiring Connector Crimp Pin Extractor for BMW Ford VW
  • ◇ Practical - Contains 23 PCS terminal release tools for most domestic, European and Japanese cars and trucks
  • ◇ Durable - Constructed with high-strength steel with a chrome finish for longevity and rust-resistance
  • ◇ Comfortable & Convenient Grip - Handles designed for extra grip and comfort; Each handle is individually marked for quick reference to included application chart
  • ◇ Convenient Storage - Easily accessed and organized in a heavy-duty mold-blown plastic carrying case that can easily go anywhere with you or fit on any shelf or storage area; Case includes a fitment application chart for quick and easy reference
  • ◇ Fitment - for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Chrysler, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles
Bestseller No. 4
kweiny Auto Terminals Removal Key Tool Electrical Wiring Connector Release Pin(11 Pieces No Duplicate)
  • Main Usage: It can remove a wire intact from a donor harness and add a new wire - very easily. so you can maintain the factory original harness and plug in your own electronic device without any damage.
  • Compatibility: The tool kit is a universal tool suitable for most connector terminal, it can be used for almost all brands of cars and other electronic devices, include GM ( Chevy, Buick, Cadillac ), Ford, Toyota, Volkswagen, Benz, BMW, Mazda, Honda, Nissan, Hyundai ,etc. and household appliances.
  • Various specifications: This item include 11 pcs different types car plug terminal extraction repair tools. 4*Single Pin Extractor + 4*Double Pin Extractor + 3*Casing Tool, For detail size and quantity, please refer to the picture of the upper left corner.
  • Easy to use: No need to pry open the terminals, just push and pull the terminal pins. It provide extra leverage, you can easily take out the wire.
  • Material: Made of steel spring plate + plastic. It is flexible resilient and durable. If necessary, you can manually change the width of the pin, and it can be restore the original shape without be damaged.
Bestseller No. 5
JRready ST5211 Pin Removal Tool KIT for Weather Pack Metri Pack Series Connector Harness terminals and Connector Crimp pin etc Electrical Connector, Tool KIT Include DRK 785084 Amp 1.5mm Removal Tool
  • Please note: If you have any questions, please feel free to contact us (please attach product pictures), and we will provide you with a satisfactory after-sales solution. We hope to establish communication with you and provide you with a good shopping experience.
  • DRK-DWP01: 16-18awg gauge Weather Pack terminals
  • DRK-DMP280: GT 150; GT 280; 150 Metri-Pack; 280 Metri-Pack; 280 Tangless & 280 Bus Bar; 630 Pull-To-Seat; Lamp Socket Bases, B-1 & W-3; 800 Metri-Pack Female
  • DRK-DMP630: 56 Series; 280 Metri-Pack; 480 MetriPack; 630 Metri-Pack; 800 Metri-Pack Male Tangless; Lamp Socket Bases, W-2 & C-2
  • DRK-785084: AMP Superseal 1.5mm Series, Insertion & Extraction Tools, Secondary Housing Lock
Bestseller No. 6
EllaYIDOI 41Pcs Terminal Removal Tool Kit, 41 Pieces Wire Connector Pin Removal Tool Kit Pin Extractor Tools for Car Auto Household Devices
  • ★High-performance multi-type design- Offers single, double,Three pin extractors and casting tool of different sizes to fit most terminal. 41 Pieces electrical pin removal tool kit includes 15Pcs Single Pin Extractor, 19Pcs Double Pin Extractor,1Pcs Three Pin Extractor,6Pcs Casing Tool
  • ★High quality- Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient
  • ★Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage
  • ★Wide Application- The terminal extractor kit are common tools for most connector terminals, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances)
  • ★Portable and convenient- Electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry
Bestseller No. 7
YSTOOL Terminal Release Kit, Universal Wire Connector Removal Pin Extractor Release Tool 23 PCS Set for American Domestic and Imported Vehicles
  • Terminal release kit provides all the tools necessary for the damage-free releasing work of plug type connectors. Includes 23pcs release tools of various shapes and sizes to help remove terminals from electrical connectors and eliminates damage to wires or terminal blocks. Makes it safer and more efficient.
  • This kit fits for a wide range of models from home and abroad. Suitable for most American, European and Japanese cars and trucks which has electrical terminal and cables. Widely fits Ford, BMW, Mercedes, Opel, Porsche, Audi, Jaguar, etc. Ideal addition to your garage.
  • Tools come packed in a heavy-duty plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each handle of pin extractors is identified with numbers for quick reference to the well-illustrated application chart
  • Constructed of alloy steel, these extractors are designed for maximum strength and longevity. Has rustproof surface and some adjustable pins. Rubber handle applies ergonomics, providing comfortable & non-slip grip, and insulating performance.
SaleBestseller No. 8
JRready ST5253 Auto Terminal Removal Tool Kit, 5Pcs Pin Extractors, Terminal Release Tool Kit for AMP Superseal 1.5, Metri Pack, MX150, Micro Timer, Bosch Connectors & More
  • 【Package Include】The terminal removal tool kit is a professional universal automotive maintenance tool,including DRK-HK01P 1PCS(Wedgelock Removal),DRK-MX150 1PCS(MOLEX 63813-1500 Equivalent),double pin extractor DRK-D230P 1PCS(TE 539960-1 Equivalent),DRK-D310P 1PCS(TE 1-1579007-6 Equivalent) and sigle pin extractor DRK-N1010P 1PCS(TE 2-1579008-1 Equivalent).
  • 【Excellent Performance of Needle Head】Electrical terminal release tool kit is made of high-quality alloy steel with quenching process,higher strength,not easy to deform,anti-corrosive.Correct operation of the pin retractor is not easy to break.
  • 【Professional Technology】After magnetic deburring and polishing,the surface of the needle extraction tool can be smoothly without being sharp,which ensures the safety of use and does not damage the terminal wiring harness.
  • 【Premium Hexagonal Handle】Rubber hexagonal handle ergonomic design makes them easy to hold in hand,comfortable non-slip grip (tips: MX150 is a metal handle).They're very sturdy and should last for a long time.
  • 【Quality & Service Commitment】JRready is dedicated to offering high-quality products and unparalleled customer service. Should you encounter any issues concerning the product, shipping, or usage, please contact us immediately for guaranteed satisfactory after-sales support. Follow our clear guidelines for easy and safe use of our wire terminal removal tool, saving you valuable time and repair costs.
Bestseller No. 9
BTSHUB Universal Terminal Release Set 23Pcs Connector Release Tool Kit for Auto Technicians, Remove Wires from Terminal Block Without Damage
  • 【Universal 】- Use the Terminal Release/Remover Set to release the terminals from plastic connector housings on American, European and Japanese vehicles
  • 【Durable】- Tips of the tools are made from stainless steel with chrome-plated hollow brass shafts for longevity and rust-resistance
  • 【Convenient Grip】- Handles designed for extra grip and comfort; Each handle is individually marked for quick reference to the included application chart
  • 【Easy Storage】All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification
  • 【Compatible】 - Fit for BMW, for Mercedes, for Opel, for VW, for Audi, for Jaguar, for Porsche, for Saab, for Seat, for Skoda, for Ford, for Renault, for Citroen, for Chrysler, for Fiat, for Honda, for Mazda, for Mitsubishi, and fit for Toyota vehicles (The fitment application chart included for quick and easy reference)
SaleBestseller No. 10
DASBET Terminal Release Kit | 23 PCS Universal Wire Connector Removal Pin Extractor Release Tool for American Domestic and Imported Vehicles
  • Terminal Release Kit: The terminal release kit provides all the tools necessary for the damage-free releasing work of plug type connectors. Includes 23pcs release tools of various shapes and sizes to help remove terminals from electrical connectors and eliminates damage to wires or terminal blocks. Makes it safer and more efficient. Additionally, this comprehensive terminal pin removal set can be utilized for disassembling various other plug terminals.
  • Constructed of alloy steel: these extractors are designed for maximum strength and longevity. Has rustproof surface and some adjustable pins. Rubber handle applies ergonomics, providing comfortable & non-slip grip, and insulating performance.
  • Blow Case: The pin extractor release tools come packed in a heavy-duty plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each handle of pin extractors is identified with numbers for quick reference to the well-illustrated application chart
  • Wide Fitment: The terminal ejector kit tool comprises a comprehensive selection of 23 terminal release tools, featuring a range of shapes and sizes meticulously designed to accommodate the electrical terminals and cables found in a wide array of cars and trucks. Fit for BMW, Mercedes, Opel, VW, Audi, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Chrysler, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles, etc.
  • Package Included: 23-piece terminal release tool set; 1-piece blow carry case

Last update on 2024-04-05 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...