MIL with Diagnostic Trouble Codes (DTCs): P0036, P0137, P0138 and/or P0141 – 2014-2015 Ford Fusion

1.5L GTDI – MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED WITH DTCS P0036, P0137, P0138 AND/OR P0141
FORD: 2014-2015 Fusion

 

2014-2015 Fusion vehicles equipped with a 1.5L Gasoline Turbocharged Direct Injected (GTDI) engine built at Hermosillo Assembly Plant on or before 10/11/2014 or Flat Rock Assembly Plant on or before 12/3/2014 may exhibit an illuminated MIL with one or more of the following diagnostic trouble codes (DTCs): P0036, P0137, P0138 and/or P0141.

 

SERVICE PROCEDURE

  1. Reprogram the powertrain control module (PCM) to the latest calibration using IDS or Ford J2534 release 93.01A or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
  1. Replace the bank 1, sensor 2 catalyst monitor sensor (CMS).

 

PART NUMBER PART NAME
DS7Z-9G444-A MIL with Diagnostic Trouble Codes (DTCs): P0036, P0137, P0138 and/or P0141 - 2014-2015 Ford Fusion 1 Catalyst Monitor Sensor

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device MIL with Diagnostic Trouble Codes (DTCs): P0036, P0137, P0138 and/or P0141 - 2014-2015 Ford Fusion 1 MIL with Diagnostic Trouble Codes (DTCs): P0036, P0137, P0138 and/or P0141 - 2014-2015 Ford Fusion 1 MIL with Diagnostic Trouble Codes (DTCs): P0036, P0137, P0138 and/or P0141 - 2014-2015 Ford Fusion 1 using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Reply

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Ad Blocker Detected

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker.

Refresh