Climate Control Seat – Poor Cooling Performance – 2015-2016 Ford Edge

“This site contains affiliate links for which OEMDTC may be compensated”

2015-2016 EdgeClimate Control Seat – Poor Cooling Performance – Built On Or Before 3-Oct-2016

Some 2015-2016 Edge vehicles equipped with climate control seats built on or before 3-Oct-2016 may exhibit poor cooling performance from the climate control seat.

 

This may be due to software in the Seat Control Module E (SCME). To correct the condition, update the SCME as-built configuration using Integrated Diagnostic System (IDS) version 105.02 or higher.

Make sure you are connected to the internet when downloading the updated as-built data.

During the update process, when prompted by IDS to use manual or automatic data retrieval, select automatic to obtain the latest configuration.

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Climate Control Seat - Poor Cooling Performance - 2015-2016 Ford Edge | small light Climate Control Seat - Poor Cooling Performance - 2015-2016 Ford Edge | small light Climate Control Seat - Poor Cooling Performance - 2015-2016 Ford Edge | small light Climate Control Seat - Poor Cooling Performance - 2015-2016 Ford Edge | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...