No Audio, Navigation Inoperative, Unable To Access Audio Features From All Controls With DTC U0184

“This site contains affiliate links for which OEMDTC may be compensated”

2017 Escape/MKC – No Audio, Navigation Inoperative, Unable To Access Audio Features From All Controls With DTC U0184

Some 2017 MKC vehicles equipped with an instrument panel center mounted speaker and 2017 Escape vehicles with a Sony audio systems may exhibit no audio, navigation inoperative, inability to access audio features with all controls including steering wheel switches and voice commands with Diagnostic Trouble Code (DTC) U0184.

If unable to communicate with the audio control module (ACM), remove the radio power fuse for 10 minutes to reset the ACM.

Reprogram the ACM to the latest calibration using the Integrated Diagnostic System (IDS) release 104.02 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.