Battery Discharge – With Or Without Repetitive Cycling Compact Disc (CD) Ejecting Noise – 2017 Ford Fusion/Lincoln MKZ – Ford & Lincoln

“This site contains affiliate links for which OEMDTC may be compensated”

SSM 46433 – 2017 Fusion/MKZ – Battery Discharge – With Or Without Repetitive Cycling Compact Disc (CD) Ejecting Noise – Built On Or Before 23-Dec-2016

Some 2017 Fusion and MKZ vehicles built on or before 23-Dec-2016 may exhibit a discharged battery. A repetitive cycling noise similar to a CD ejecting noise may also be present.

If excessive battery drain is present and eliminated with the radio battery power fuse removed, reprogram the audio control module (ACM) to the latest calibration using the Integrated Diagnostic System (IDS) release 104.03 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

For claiming, use causal part 18C869 and applicable labor operations in section 10 of the SLTS manual.

APPLICABLE VEHICLES
2017 CAR: C7 FUSION
2017 CAR: C9 MKZ (CD533)

https://static.nhtsa.gov/odi/tsbs/2017/SB-10099450-2532.pdf

Taking too long?

Reload document

Open in new tab

Download

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.