Illuminated MIL with DTC P0170 – 2015-2016 Ford F-Super Duty

“This site contains affiliate links for which OEMDTC may be compensated”
6.7L – ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0170
Publication Date: October 5, 2016

 

FORD: 2015-2016 F-Super Duty

 

ISSUE:

Some 2015-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated MIL with DTC P0170 (fuel trim bank 1) stored in the powertrain control module (PCM) memory.

 

ACTION:

Reprogram the PCM to the latest calibration using IDS release 102.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.

NOTE: ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE’S COMPUTER TO LEARN THE TRANSMISSION’S UNIQUE PARAMETERS AND IMPROVE SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.

OPERATION DESCRIPTION TIME
160134A 2015-2016 F-Super Duty 6.7L: Retrieve DTCs And Reprogram The PCM (Do Not Use With Any Other Labor Operations) 0.4 Hr.

 

WARRANTY STATUS

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

DEALER CODING

BASIC PART NO. CONDITION CODE
RECALEM 04

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Illuminated MIL with DTC P0170 - 2015-2016 Ford F-Super Duty | small light Illuminated MIL with DTC P0170 - 2015-2016 Ford F-Super Duty | small light Illuminated MIL with DTC P0170 - 2015-2016 Ford F-Super Duty | small light Illuminated MIL with DTC P0170 - 2015-2016 Ford F-Super Duty | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...