MIL with Diagnostic Trouble Code DTC P013C – 2016 Lincoln MKX

TSB 16-0078	3.7L – ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) – DIAGNOSTIC TROUBLE CODE (DTC) P013C – BUILT ON OR BEFORE 4/21/2016
Publication Date: May 4, 2016

 

LINCOLN:

2016 MKX

 

ISSUE:

Some 2016 MKX vehicles equipped with a 3.7L Duratec engine and built on or before 4/21/2016 may exhibit an illuminated MIL with DTC P013C stored in the powertrain control module (PCM). This may be caused by improper sealing of the left side exhaust y-pipe flange due to weld splatter or exhaust pipe intrusion into the flange sealing surface.

 

ACTION:

Follow the Service Procedure steps to correct the condition.

 

SERVICE PROCEDURE

1. Use the Ford Integrated Diagnostic System (IDS) or equivalent scan tool to check for DTCs in the PCM. Is DTC P013C present?
   1. Yes – proceed to Step 2.
   2. No – this article does not apply. Refer to the Powertrain Controls and Emissions Diagnostics (PC/ED) manual for normal diagnostics.
2. Remove the exhaust y-pipe. Refer to Workshop Manual (WSM), Section 309-00.
3. Inspect the left side exhaust y-pipe flange sealing area that attaches to the left side catalytic converter for signs of weld slag and/or exhaust pipe intrusion into the flange sealing area. Are sign of weld slag and/or exhaust pipe intrusion present in the flange sealing area? (Figures 1-2)
   

   

   
   Figure 1 – 16-0078
   

   
   
   Figure 2 – 16-0078

   1. Yes – proceed to Step 4.
   2. No – proceed to Step 5.
4. Use a flat file or 60 grit sandpaper on an oscillating sander with a flat pad to remove the weld slag and/or exhaust pipe material protruding above the flange sealing surface.
   1. Removing too much material from the flange sealing surface may cause additional exhaust leaks.
5. Check for proper torque of the left side catalyst monitoring sensor (CMS). The CMS should be torqued to 48 Nm (35 lb-ft ).
6. Clean the exhaust y-pipe mounting flanges with a clean microfiber cloth and replace the exhaust y-pipe gaskets.
7. Reinstall the exhaust y-pipe. Refer to WSM, Section 309-00.
8. Clear DTCs from the PCM memory.

 

F2GZ-9450-A	Gasket – Exhasut Y Pipe Outlet
7T4Z-9450-AA	Gasket – Exhaust Y Pipe Flange to Converter Gasket
W714265-S442	Fastener – Exhaust System (8 Req.)

 

OPERATION	DESCRIPTION	TIME
160078A	2016 MKX 3.7L: Retrieve DTCs And Clean Sealing Surfaces Following The Service Procedure (Do Not Use With Any Other Labor Operations)	0.6 Hr.

 

WARRANTY STATUS

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

DEALER CODING

BASIC PART NO.	CONDITION CODE
5G203	D8