| “This site contains affiliate links for which OEMDTC may be compensated” |
2015-2017 MKC/2016 MKX/2015-2017 MKZ – Loss Of MyLincoln Mobile (MLM) Remote Features – Equipped With TCU Built On Or Before 19-Oct-2016
Some 2015-2017 MKC, 2016 MKX, and 2016-2017 MKZ vehicles equipped with a Telematics Control Unit (TCU) built on or before 19-Oct-2016 may exhibit loss of functionality of remote features via the MyLincoln Mobile Application.
To correct the condition, program the TCU to the latest calibration using IDS version 102.03 or higher.
Make sure you are connected to the internet when entering module programming to obtain the latest calibration.
Calibration files may also be obtained at www.motorcraftservice.com.
For 2015 MKC/MKZ vehicles make sure FSA 15N04 has been completed prior to attempting reprogramming.
If FSA 15N04 has been completed and the TCU is at the latest calibration, then refer to WSM, Section 415-00 for normal diagnostics.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
