Home - Rolling Idle at High Altitude and/or High Ambient Temperatures – 2011 Ford Fiesta
Rolling Idle at High Altitude and/or High Ambient Temperatures – 2011 Ford Fiesta
March 22, 2016
ROLLING IDLE AT HIGH ALTITUDE AND/OR HIGH AMBIENT TEMPERATURES – BUILT ON OR BEFORE 7/30/2010
Fiesta vehicles equipped with an automatic transmission built on or before 6/28/2010 or equipped with a manual transmission built on or before 7/30/2010 may exhibit a rolling idle condition when idling in drive gear position with the A/C turned on.
This condition may exist when operating at elevated ambient temperatures above 80 Fahrenheit (26.7 Celsius) and/or when operating at high altitude above 8000 feet (2438 meters).
powertrain control module ( PCM) to the latest calibration using IDS or Ford J2534 release 68.06 and higher. This new calibration is not included in the VCM 2010.7 DVD.
Calibration files may also be obtained at www.motorcraft.com.
Software necessary to program electronic modules to the latest
calibration level, perform module initialization ( PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (
PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data www.motorcraftservice.com